• Journal of Korea Multimedia Society
• /
• v.16 no.2
• /
• pp.198-205
• /
• 2013

In this paper, the performance of multicore processor architecture is analyzed which utilizes out-of-order superscalar processor core using multiple basic block execution. Using SPEC 2000 benchmarks as input, the trace-driven simulation has been performed for the out-of-order superscalar processor with the window size from 32 to 64 and the number of cores between 1 and 16, exploiting multiple basic block execution from 1 to 4 extensively. As a result, the multicore out-of-order superscalar processor with 4 basic block execution achieves 22.0 % average performance increase over the same architecture with the single basic block execution.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.37 no.5
• /
• pp.655-666
• /
• 2013

Disposable protective coveralls that cover the entire face and body are essential for operations in contaminative or dangerous environments. This research studied disposable protective coveralls on Korean market in order to improve the products that agricultural workers wear. We investigated the size specifications of 22 disposable protective coverall products sold in Korean markets and analyzed how well the size specifications cover Koreans' sizes by comparing and analyzing the size specifications with Korean body measurements and Korean standards for protective clothing. We analyzed the consistency, regularity, and fitness to body measurements of Koreans for each size by measuring the sizes of 15 different parts for 22 products each. Current disposable protective coverall products for the Korean market are unsuitable for Korean body measurements, especially women's. It was expected that wearers would be unable to choose products that fit their bodies well just by the offered size specifications due to a lack of regularity between the measurements for each size. In this result, it was assumed that the development of KS standards and the coverall pattern that reflect the body measurements of Koreans are needed.

• Fashion & Textile Research Journal
• /
• v.24 no.5
• /
• pp.618-627
• /
• 2022

This is a basic study to recommend a legging sizing system suitable for middle-aged women. This study aims to explore and analyze the sizing system of branded leggings for middle-aged women. Therefore, 40 pairs of leggings from 20 brands preferred by middle-aged women were first selected to compare their sizing systems. Thus, it was found that the size distribution of legging brands varied significantly, and the number of sizes or the size deviation also varied depending on the brands or products. Second, the adult female age groups were classified as 18-24 years, 25-34 years, 35-44 years, and 45-59 years. Additionally, the distribution of the waist and hip circumferences by age group was compared with the size specifications of the leggings. Leggings with large differences between size specifications and body size distribution were identified in each age group. In the case of women aged 45 to 59, the size distribution suitability of branded leggings was found to be the lowest among the four age groups. Furthermore, it was also found that it is important to reflect the body size distribution, especially the waist circumference, to establish a legging sizing system suitable for women aged 45 to 59 years.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.4
• /
• pp.945-951
• /
• 2008

In this paper, a new high performance data cache scheme that improves exploitation of both the spatial and temporal locality is proposed. The proposed data cache consists of a hardware prefetch unit and two sub-caches such as a direct-mapped (DM) cache with a large block size and a fully associative buffer with a small block size. Spatial locality is exploited by fetching and storing large blocks into a direct mapped cache, and is enhanced by prefetching a neighboring block when a DM cache hit occurs. Temporal locality is exploited by storing small blocks from the DM cache in the fully associative buffer according to their activity in the DM cache when they are replaced. Experimental results on Spec2000 programs show that the proposed scheme can reduce the average miss ratio by $12.53%\sim23.62%$ and the AMAT by $14.67%\sim18.60%$ compared to the previous schemes such as direct mapped cache, 4-way set associative cache and SMI(selective mode intelligent) cache[8].

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.5
• /
• pp.123-128
• /
• 2012

In order to overcome the hardware complexity and performance limit problems, recently the multi-core architecture has been prevalent. For hardware simplicity, usually RISC processor is adopted as the unit core processor. However, if the performance of unit core processor is enhanced, the overall performance of the multi-core processor architecture can be further enhanced. In this paper, in-order superscalar processor is utilized as the core for the multi-core processor architecture. Using SPEC 2000 benchmarks as input, the trace-driven simulation has been performed for the number of superscalar cores between 2 and 16 and the window size of 4 to 16 extensively. As a result, the 16-core superscalar processor for the window size of 16 results in 8.4 times speed up over the single core superscalar processor. When compared with the same number of cores, the multi-core superscalar processor performance doubles that of the multi-core RISC processor.

• The Research Journal of the Costume Culture
• /
• v.29 no.6
• /
• pp.881-903
• /
• 2021

This study aimed to analyze adult men's body sizes and shapes and suggest size specifications to provide preliminary data to academia and industries. A total of 814 adult men aged 30-44 were selected from the 7th Size Korea data, and 55 direct upper body measurement and calculation items were analyzed using SPSS 25.0. In individual Individual differences, thickness, circumference, and width were high, and height and length were low. Height above the waist base line and shoulder dimension decreased in early 40s age group, while height below the waist base line declined as age increased. In addition, buttocks shape changes were found in early 40s age group. According to factor analysis, 'upper body and upper-extremity horizontal size', 'torso height and upper extremity length', 'shoulder dimension', 'upper body length' and 'shoulder angle' were derived. Using clustering analysis, four different body types were classified: i) big abdomen with flat chest, ii) slender with big, raised shoulders, iii) dwarfish with small, droopy shoulders, and iv) obese with large shoulders. 'Slender with big, raised shoulders' was a typical body shape among men aged 30-44. In older participants, the 'big abdomen with flat chest' ratio was low, while 'obese with large shoulders' was more common. This study proposed size specifications by body type considering the above characteristics.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.4
• /
• pp.768-772
• /
• 2007

Integration of RF front end module(FEM) into the antenna has been investigated in USPCS band (1.88GHz-1.99GHz). The FEM consists of input filter, power amplifier, coupler, power detector, bias switch and duplexer. The antenna was designed in planar inverted F antenna(PIFA) structure to implement it inside the handset. In order to avoid strong coupling between the antenna and FEM, a shielding ground layer was placed between them. The antenna size is 19mm by 10mm by 6mm under which FEM whose size is 8mm by 5mm by 1.5m locates. The antenna impedance was selected to match to FEM having better efficiency rather than gain since FEM has enough gain whose system spec is minimum of 20dB. The antenna patterns are shown with and without FEM.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.1009-1012
• /
• 1999

An analytical performance model that can predict the performance of a superscalar processor employing multiple branch prediction is introduced. The model is based on the conditional independence probability and the basic block size of instructions, with the degree of multiple branch prediction, the fetch rate, and the window size of a superscalar architecture. Trace driven simulation is performed for the subset of SPEC integer benchmarks, and the measured IPCs are compared with the results derived from the model. As the result, our analytic model could predict the performance of the superscalar processor using multiple branch prediction within 6.6 percent on the average.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2003.09a
• /
• pp.109-119
• /
• 2003

o In order to start SIP Project .Marketing (& ASIC team) should present biz planning, schedule, device/SIP specs., in SIP TFT prior to request SIP development for package development project. .In order to prevent (PCB) revision, test, burn-in, & quality strategy should be fixed by SIP TFT (PE/Test, QA) prior to request for PKG development. .Target product price/cost, package/ test cost should be delivered and reviewed. o Minimum Information for PCB Design, Package Size, and Cost .(Required) package form factor: size, height, type (BGA, QFP), Pin count/pitch .(Estimated) each die size including scribe lane .(Estimated) pad inform. : count, pitch, configuration(in-line/staggered), (open) size .(Estimated) each device (I/O & Core) power (especially for DRAM embedded SIP) .SIP Block diagram, and net-list using excel sheet format o Why is the initial evaluation important\ulcorner .The higher logic power resulted in spec. over of DRAM Tjmax. This caused business drop longrightarrow Thermal simulation of some SIP product is essential in the beginning stage of SIP business planning (or design) stage. (i.e., DRAM embedded SIP) .When SIP is developed using discrete packages, the I/O driver Capa. of each device may be so high for SIP. Since I/O driver capa. was optimized to discrete package and set board environment, this resulted in severe noise problem in SIP. longrightarrow In this case, the electrical performance of product (including PKG) should have been considered (simulated) in the beginning stage of business planning (or design).

• Journal of the Korean Home Economics Association
• /
• v.41 no.3
• /
• pp.45-56
• /
• 2003

The purpose of this study was to compare the pantyhose labels of domestic products which contain fiber content, size spec., care symbol, performance properties with those of foreign-made ones, in order to propose a desirable model of label description for the domestic products. The results were as follows: 1) There were differences in the fiber content and fiber mixture ratio of pantyhose on the label according to the countries. The pantyhoses made in Korea and Japan were described only fiber name on the label, while the pantyhoses made in U.S.A., Taiwan, and England were described fiber name and percent of fiber mixture ratio in detail on the label. 2) Most of the pantyhose size produced and sold in Korea were same Free size, but the products from other countries (U.S.A., England, Japan, Taiwan) were sold in various sizes. 3) There were differences, according to the countries, in the care symbol and related explanation of pantyhose on the label. The pantyhoses made in Korea and Taiwan were described care symbol only on the label, while the pantyhoses made in other countries were described additional explanation for care as well as care symbol on the label. 4) It was known that, unlike Korea, other countries were developing and marketing various types of functional pantyhose. For example, U.S.A. and England were focusing on appearance and comfort aspects of pantyhose, while Japan and Taiwan were focusing to develop functional pantyhose like anti-bacterial and anti-ultraviolet ray pantyhose.