• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1686-1690
• /
• 2005

Although metal ball can be used as parts of bearing or metal filter, that is used by single product with solder ball or shot ball. Also, according as demand of metal ball of various diameter increase, processing property 솜 extension of coverage are important. Especially an optimal design of cutting roller was investigated for determining appropriate dimensions of components of manufacturing system. In this study, the effects of the diameter and the round radius of cutting roller were calculated and analyzed. We applied data of rigid-plastic FEM Simulation in basis design of equipment to solve these issues, and confirmed processing factor about metal ball manufacturing process that use cutting process of metal wire in this research

• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 2003년도 추계학술대회 논문집
• /
• pp.81-83
• /
• 2003

The present study attempted to observe what changes the supply of highly concentrated(30％) oxygen cause to people's ability and cerebrum lateralization of verbal cognition, compared to air of normal oxygen concentration(21％). The experiment consisted of two runs, one for verbal cognition test with normal air(21％ of oxygen) and for verbal cognition test with more oxygen in the air(30％ of oxygen). Functional brain images were taken form 3T MRI using the single-shot EPI method. There were more activations observed at the occipital, parietal, temporal, and frontal lobes, but there were no changes in cerebrum lateralization with 30％ oxygen administration. The result of task performance showed the accuracy increased at 30％'s concentration of oxygen rather than 21％'s. It is concluded that the positive effect on the verbal cognitive performance level by the highly concentrated oxygen administration was due to changeless increase of left and right cerebrum activation.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.914-917
• /
• 2001

Single-shot laser damage of thin Cr films on glass substrates has been studied to understand the cracking and peeling-off mechanism. A numerical model is developed for the calculation of transient heat transfer and thermal stresses in Cr films during excimer laser irradiation and cooling, the transient temperature, and the stress-strain fields are analyzed by using a three-dimensional finite-element model of heat flow. According to the numerical analysis for the experimentally determined cracking and peeling-off conditions, cracking is found to be the result of the tensile brittle fracture due to the excessive thermal stresses formed during the cooling process, while peeling-off is found to be the combined result of films bulging from the softened glass surface at higher temperature and the tensile brittle fracture during the cooling process.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.683-685
• /
• 2003

We report on a surface planarization process that produces more planar surface than previous sequential lateral solidification crystallized poly silicon films. By applying the single shot laser irradiation with optimum energy density ($(817mJ/cm^{2})$ on the ridge area after SLS crystallization, the ridge height can be decreased.

• 대한자기공명의과학회:학술대회논문집
• /
• 대한자기공명의과학회 2001년도 제6차 학술대회 초록집
• /
• pp.25-34
• /
• 2001

복부의 자기공명영상(Magnetic resonance imaging； MRI)은 주로 간 질환의 검사에서 다른 영상검사로 해결되지 않은 궁금점을 풀기 위한 보조적인 검사로 주로 사용하였으나, 최근 들어서는 병변의 발견 및 감별진단에 직접적인 검사로도 자주 이용하고 있으며, 담췌관 질환이나 위장관 검사 등에도 적용범위가 넓어지고 있다. 이는 그간의 하드웨어 및 소프트웨어상의 발달로 인해, 위장관 연동운동이나 호흡에 따른 인공물을 억제하면서도 해부학적인 세부구조는 자세하게 나타낼 수 있는 우수한 영상을 얻을 수 있음으로써 가능하게 되었다. 고속영상은 영상의 질을 우수하게 할 뿐 아니라, 검사시간을 단축시켜서 더 많은 환자를 검사할 수 있게 하고, 한자가 검사에 더 잘 적응할 수 있게 하여준다. 단발(single-shot)기법의 고속 T2강조영상은 담췌관이나 위장관등 그간 MRI를 적용하기 어려웠던 부위에 대한 검사가 가능하게 하였으며, 고속의 3차원 T1강조 펄스대열(pulse sequence)은 단면에 따른 오기록(misregistration)이나 운동인공물이 적으면서도, 향상된 다평면적인 영상구성을 얻을 수 있게 하였다. ［l］. 본 강좌에서는 최근 수년간 복부 MRI의 응용을 증가할 수 있게 한 영상장치 및 펄스대열의 발전과 최근 국내에 시판이 허용되어 사용이 증가되고 있는 새로운 간자기공명조영제에 관해서 살펴보고자 한다.

• Investigative Magnetic Resonance Imaging
• /
• 제20권3호
• /
• pp.141-151
• /
• 2016

Purpose: Advances of magnetic resonance imaging (MRI), especially that of the Ultra-High Field (UHF) MRI will be reviewed. Materials and Methods: Diffusion MRI data was obtained from a healthy adult young male of age 30 using a 7.0T research MRI scanner (Magnetom, Siemens) with 40 mT/m maximum gradient field. The specific imaging parameters used for the data acquisition were a single shot DW echo planar imaging. Results: Three areas of the imaging experiments are focused on for the study, namely the anatomy, angiography, and tractography. Conclusion: It is envisioned that, in near future, there will be more 7.0T MRIs for brain research and explosive clinical application research will also be developed, for example in the area of connectomics in neuroscience and clinical neurology and neurosurgery.

• 동력기계공학회지
• /
• 제19권3호
• /
• pp.5-10
• /
• 2015

Femtosecond laser machining has been applied for creating a sensor function in silica glass optical fibers. Femtosecond laser pulses make it possible to fabricate micro structures in processed regions of a very thin glass fiber line because femtosecond laser pulses can extremely minimize thermal effects. With the laser machining to optical fiber using a single shot of 210-fs laser at a wavelength of 800 nm, it was observed that a processed region surrounded a thin layer which seemed to be a hollow cavity monitored by scanning electron microscopy (SEM). This study aims at a theoretical investigation for the processed region by using a numerical analysis in order to embed sensing function to optical fibers. Numerical methods based finite element method (FEM) has been used for an optical waveguide modeling. This report suggests two types modeling and describes a comparative study on optical losses obtained by the experiment and the numerical analysis.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2008년도 International Symposium on Remote Sensing
• /
• pp.137-140
• /
• 2008

Recently many areas require wide field of view images. Such as surveillance, virtual reality, navigation and 3D scene reconstruction. Conventional camera systems have a limited filed of view and provide partial information about the scene. however, omni directional vision system can overcome these disadvantages. Acquiring 360 degree panorama images requires expensive omni camera lens. In this study, 360 degree panorama image was tested using a low cost optical reflector which captures 360 degree panoramic views with single shot. This 360 degree panorama image system can be used with detailed positional information from GPS/INS. Through this study result, we show 360 degree panorama image is very effective tool for mobile monitoring system.

• Journal of the Korean Statistical Society
• /
• 제6권1호
• /
• pp.65-76
• /
• 1977

The relative importance of single-shot kill probabilities, rates of fire, weapon allocation strategies, and the size of initial force in warfare between two force with heterogeneous multiple weapon systems are considered by examining their effect on a natural measure of effectiveness, the expected number of survivors. Attrition equations are derived via stochastic formulation to represent the mean course of battle having an underlying probability distribution. It is assumed that each side uses indirect area fires. Level of intelligence activities are reflected in the availability of spontaneous information on the current enemy status. Depending on the availability of the information on the current enemy status, each participatory unit may follow 1) a prescribed attack pattern (fraction of the available units assigned to various enemy targets) or 2) an adaptive attack pattern depending on the enemy status at that time. Conditions for possible stalemate are discussed.

• 대한자기공명의과학회:학술대회논문집
• /
• 대한자기공명의과학회 2003년도 제8차 학술대회 초록집
• /
• pp.33-33
• /
• 2003

목적： 확산텐서영상 획득시 확산경사자장의 방향수와 FA값, 그리고 FA값의 표준편차와의 상관관계를 조사해 보고자 하였다. 대상 및 방법： 3T MR scanner에서 정상성인 10명(남자 5명, 여자 5명)을 대상으로 걸어주는 확산강조 경사자장의 수(N = 6, 11, 23, 35, 47)를 증가시키며 확산텐서영상을 획득하였다. 획득된 영상들로부터 FA map을 만들고 주요 뇌구조물(frontal GM, putamen, posterior limb of internal capsule, thalamus 등)에 관심영역을 설정하여 FA값을 측정하였으며 그 FA값의 표준편차(sd) 를 계산하였다. 이때 사용한 펄스열은 Stejskal-Tanner type의 확산강조 경사자장이 포함된 single-shot SE EPI를 사용하였으며 영상획득시 사용한 피라미터는 다음과 같다. TR/TE=8000ms/71ms, Thickness/spacing=5/2mm, FOV=240mm, Matrix=$128{\times}128$, NEX= 1, b value=1000s/$\textrm{mm}^2$.