• 제목/요약/키워드: Single source

검색결과 2,217건 처리시간 0.033초

단상 인버터의 동작에 의한 이중접속 3상 전압원 인버터의 출력파형 개선 (Output Waveform Improvement of Double-Connected 3-Phase Voltage Source Inverter by Single-Phase Inverter)

  • 최세완
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2000년도 전력전자학술대회 논문집
    • /
    • pp.330-334
    • /
    • 2000
  • This paper proposes a new double-connected 3-phase voltage source inverter with improved output voltage waveform. An auxiliary single-phase inverter injects a ripple voltage into the double- connected inverter to convert 12-step operation to 36-step operation. The KVA rating of the output phase-shifting transformer is reduced by employing a harmonic canceling reactor. The whole rectifier-inverter system including the proposed technique is introduced and the experimental results are provided.

  • PDF

공초점 원리와 광섬유 광원 변조를 이용한 무한보정 현미경 자동초점 (Autofocus of Infinity-Corrected Optical Microscopes by Confocal Principle and Fiber Source Modulation Technique)

  • 박정재;김승우;이호재
    • 한국광학회지
    • /
    • 제15권6호
    • /
    • pp.583-590
    • /
    • 2004
  • 비전을 이용한 광학식 검사공정이나 그 밖의 광학 현미경을 이용한 측정에 있어서 초점조절은 곧바로 측정 정밀도에 영향을 주는 중요한 요소이다. 본 논문에서는 핀홀 대신 광섬유를 사용하는 공초점 현미경 구조와 하나의 광섬유가 광원과 검출기의 역할을 동시에 수행하는 상반구성(reciprocal scheme)을 적용함으로써 간결하게 시스템을 구성하면서 광축 정렬을 용이하게 하였으며, 압전소자(PZT)를 이용한 광섬유 광원의 광축 방향 변조를 통해 방향 정보가 실린 초점오차 신호를 획득함으로써 빠른 초점조절을 구현하였다. 대물렌즈 변조방식과 달리 광원 변조방식은 현미경 시스템에 미치는 물리적 영향을 줄일 수 있으며, 기존의 장치에 탑재가 비교적 용이하다는 장점을 갖는다. 본 논문에서는 변조 진폭과 시편의 반사도 및 기울기 변화에 따른 초점오차 신호의 변화를 측정하였으며, 거울 시편에 대한 초점조절을 통해 본 시스템의 성능을 평가해 보았다. 또한 종방향 특성곡선의 반치폭 비교실험을 통해 광원 변조는 광축 방향 분해능에 영향을 주지 않음을 확인하였다.

64-slice single source CT와 128-slice dual source CT를 이용한 관상동맥 조영 검사 시 환자선량 비교 (Comparison of Radiation Doses between 64-slice Single Source and 128-slice Dual Source CT Coronary Angiography in patient)

  • 강영한
    • 한국방사선학회논문지
    • /
    • 제6권2호
    • /
    • pp.129-136
    • /
    • 2012
  • 본 연구는 64-절편 단선원 CT(SSCT)와 128-절편 이중선원(DSCT)을 이용한 관상동맥조영 CT 검사 시 방사선량에 대해 알아보고, 이 선량으로 인한 암 발생의 잠재적 위험(LAR)을 평가해 보았다. SSCT의 후향적동조화(RGH)스캔의 유효선량은 13.86 mSv 이었고, DSCT의 RGH 스캔의 유효선량은 11.87 mSv 이었다. DSCT의 전향적동조화 (PGT) 스캔 중 선량변조를 적용치 않은 모드의 유효선량은 5.61 mSv, 선량변조를 적용하였을 때는 3.04 mSv 이었다. 1회 스캔하는 FLASH 모드는 0.98 mSv 이었다. SSCT의 RGH 스캔의 LAR은 1,176명 중 1명, DSCT의 RGH에서는 1,960명 중 1명이었다. DSCT의 PGT는 3,030명 중 1명, 선량변조를 하면 5,882명 중 1명에서 발암 위험이 있었다. 따라서 SSCT와 DSCT를 이용한 관상동맥조영 CT 검사는 암발생 귀속위험과 관련성이 있음을 인지하여야 하고, 환자선량을 줄이기 위해 RGH보다 PGT, FLASH 등의 프로토콜을 적용하는 것이 필요하다.

배관 검사용 Radiometric Scanning System 제작 및 시험 (Development of Radiometric Scanning System for the Evaluation of the Pipeline)

  • 김용균;홍석붕;정종은;이윤호;정용하;이정기
    • 비파괴검사학회지
    • /
    • 제22권5호
    • /
    • pp.474-482
    • /
    • 2002
  • 필름을 사용하지 않는 방사선투과검사 시스템인 1차원 Radiometric scanning system을 개발하여 부식 및 침적물이 있는 배관의 두께평가에 적용해 보았다. 개발된 시스템은 단일 방사성 동위원소에서 나오는 방사선을 선형으로 접속하여 시험체를 투과시킨 방사선을 한개의 섬광형 검출기언 BGO를 사용하여 검출하는 single source-single detector alignment system을 제어하는 기계주사 시스템과 제어 프로그램을 개발하였다. 개발된 시스템의 성능을 GEMANT4 프로그램을 사용하여 예측하여 보았다. 그리고, 인공결함을 제작하여 넣은 시편과 두께 변화를 준 시편에 적용하여 실제 성능을 평가하였다. 이 시스템은 방사성 동위원소를 이용하여 배관의 부식과 침적물에 의한 두께 변화에 대하여 실시간으로 필름을 사용하지 않고 평가할 수 있는 가능성을 알 수 있었다.

출력이 직렬 결합된 단상 Quasi Z-소스 AC-AC 컨버터 (A Single-Phase Quasi Z-Source AC-AC Converter with a Series Connection of the Output Terminals)

  • 엄준현;정영국;임영철;최준호
    • 전력전자학회논문지
    • /
    • 제16권5호
    • /
    • pp.415-429
    • /
    • 2011
  • 본 연구에서는 출력이 직렬 연결된 단상 quasi Z-소스 AC-AC 컨버터를 제안하였다. 제안된 시스템은 단상quasi Z-소스 AC-AC 컨버터 2대의 입력 단을 병렬로 연결하고 출력 단을 직렬로 연결한 구조로 되어 있으며, 역상 모드와 동상 모드 별 전류 흐름과 출력전압의 형성 과정을 나타내었다. DSP로 제어되는 실험 시스템을 제작하여 PSIM시뮬레이션 결과와 비교 분석하였다. 그 결과 각 모드별로 듀티 비를 제어하여 원하는 출력 전압을 벅-부스트 할 수 있었다. 컨버터 1대가 단독으로 운전한 경우에 비하여, 각각의 모드에 대하여 부하 저항의 증가에 따른컨버터 효율과 입력 역률을 제안된 방법에 의하여 개선할 수 있었다. 또한 역상 모드의 경우, 일정 부하에서 컨버터의 효율과 입력 역률을 각각 10[%]와 35[%]정도 개선하였으며, 특히 부하 저항이 변동하는 과도상태에서도 일정한 출력 전압을 유지할 수 있었다.

Growth and characterization of molecular beam epitaxy grown GaN thin films using single source precursor with ammonia

  • Chandrasekar, P.V.;Lim, Hyun-Chul;Chang, Dong-Mi;Ahn, Se-Yong;Kim, Chang-Gyoun;Kim, Do-Jin
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2009년도 제38회 동계학술대회 초록집
    • /
    • pp.174-174
    • /
    • 2010
  • Gallium Nitride(GaN) attracts great attention due to their wide band gap energy (3.4eV), high thermal stability to the solid state lighting devices like LED, Laser diode, UV photo detector, spintronic devices, solar cells, sensors etc. Recently, researchers are interested in synthesis of polycrystalline and amorphous GaN which has also attracted towards optoelectronic device applications significantly. One of the alternatives to deposit GaN at low temperature is to use Single Source Molecular Percursor (SSP) which provides preformed Ga-N bonding. Moreover, our group succeeds in hybridization of SSP synthesized GaN with Single wall carbon nanotube which could be applicable in field emitting devices, hybrid LEDs and sensors. In this work, the GaN thin films were deposited on c-axis oriented sapphire substrate by MBE (Molecular Beam Epitaxy) using novel single source precursor of dimethyl gallium azido-tert-butylamine($Me_2Ga(N_3)NH_2C(CH_3)_3$) with additional source of ammonia. The surface morphology, structural and optical properties of GaN thin films were analyzed for the deposition in the temperature range of $600^{\circ}C$ to $750^{\circ}C$. Electrical properties of deposited thin films were carried out by four point probe technique and home made Hall effect measurement. The effect of ammonia on the crystallinity, microstructure and optical properties of as-deposited thin films are discussed briefly. The crystalline quality of GaN thin film was improved with substrate temperature as indicated by XRD rocking curve measurement. Photoluminescence measurement shows broad emission around 350nm-650nm which could be related to impurities or defects.

  • PDF