• 전기학회논문지
• /
• 제65권10호
• /
• pp.1746-1754
• /
• 2016

In this paper, we provide a development and evaluation method for an archery posture analyzing system, using an inertial sensor. The system was developed using LabVIEW2014 by National Instruments and evaluated using the DTW algorithm. To convert the voltage value of the inertial sensor into a physical value, a coordinate transformation matrix bias was applied. To evaluate the similarity of movement in archery shooting, the DTW distance was calculated and similarity was confirmed based on simple mechanical movement, the same person's shooting movement, shooting movement with another person, and the noise signal. The average similarity comparison results were as follows: simple mechanical movement was 17.05%, the same person's shooting movement was 26.48%, shooting movement with another person was 62.8%, and the noise signal was 328.5%; a smaller value indicates a higher level of similarity. We confirmed the possibility of analyzing the archery posture using 3-axis acceleration of the inertial sensor. We inferred that the proposed method might be important means for assessing shooting skills, evaluation of archer's progress, and finding talented archers in advance.

• Journal of Pharmaceutical Investigation
• /
• 제33권3호
• /
• pp.245-253
• /
• 2003

Dissolution profile comparsions can be done by virtue of the similarity factor $(f_2)$. It is a logarithmic reciprocal square root transformation of the sum of squared error of % dissolution differences between two profiles at several time points. It gives information on the degree of similarity between the two profiles: An $f_2$ value between 50 and 100 suggests the similarity/equivalence of the two dissolution curves being compared. The objective of this report was to provide a careful examination on the $f_2$ metrics in detail. It was shown that $f_2$ values exceeded 50, when relative differences in % dissolved between two products were less than 15% at all time points. The similarity factor value was also found to be greater than 50, in cases when absolute % dissolution differences were below 10% at all time points. Interestingly, the $f_2$ value was changed by the number of the time points selected for calculation. In particular, $f_2$ tended to have higher values, when the $f_2$ metrics used a large number of time points in which % dissolved reached plateau. Finally, since the similarity factor was a sample statistics, it was impossible to infer type I/II errors and sampling error. Despite certain limitations inherited in the $f_2$ metrics, it was easy and convenient to evaluate how similar the two dissolution profiles were.

• 한국방사선학회논문지
• /
• 제16권3호
• /
• pp.295-302
• /
• 2022

희박뷰 전산화단층촬영(computed tomography; CT) 영상화 기술은 피폭 방사선량을 감소시킬 수 있을 뿐만 아니라 획득한 투영상의 균일성을 유지하고 잡음을 감소시킬 수 있는 장점이 있다. 하지만 재구성 영상 내 인공물 발생으로 인하여 화질 및 피사체 구조가 왜곡되는 단점이 있다. 본 연구에서는 희박뷰 CT 영상의 인공물 감소를 위해 wavelet 변환과 잔차 학습(residual learning)을 적용한 콘볼루션 신경망(convolutional neural network; CNN) 기반 영상화 모델을 개발하고, 개발한 모델을 통한 희박뷰 CT 영상의 인공물 감소 정도를 정량적으로 분석하였다. CNN은 wavelet 변환 층, 콘볼루션 층 및 역 wavelet 변환 층으로 구성하였으며, 희박뷰 CT 영상과 잔차 영상을 각각 입출력 영상으로 설정하여 영상화 모델 학습을 진행하였다. 영상화 모델 학습을 위해 평균제곱오차(mean squared error; MSE)를 손실함수로, Adam 함수를 최적화 함수로 사용하였다. 학습된 모델을 통해 입력 희박뷰 CT 영상에 대한 예측 잔차 영상을 획득하고, 두 영상간의 감산을 통해 최종 결과 영상을 획득하였다. 또한 최종 결과 영상에 대한 시각적 특성, 최대신호대잡음비(peak signal-to- noise ratio; PSNR) 및 구조적유사성지수(structural similarity; SSIM)를 측정하였다. 연구결과 본 연구에서 개발한 영상화 모델을 통해 희박뷰 CT 영상의 인공물이 효과적으로 제거되며, 공간분해능이 향상되는 결과를 확인하였다. 또한 wavelet 변환과 잔차 학습을 미적용한 영상화 모델에 비해 본 연구에서 개발한 영상화 모델은 결과 영상의 PSNR 및 SSIM을 각각 8.18% 및 19.71% 향상시킬 수 있음을 확인하였다. 따라서 본 연구에서 개발한 영상화 모델을 이용하여 희박뷰 CT 영상의 인공물 제거는 물론 공간분해능 향상 및 정량적 정확도 향상 효과를 획득할 수 있다.

• 한국정보과학회논문지:데이타베이스
• /
• 제33권7호
• /
• pp.727-740
• /
• 2006

서로 다른 XML 스키마로 작성된 XML 문서간의 변환을 위해서는 두 스키마 사이의 의미적 연관관계를 계산하는 스키마 매칭 과정이 필수적이다. 본 논문에서는 XML 문서의 변환을 위한 효율적인 스키마 매칭 알고리즘을 제안한다. 제안된 알고리즘은 두 단계로 구성된다. 먼저 제안된 온톨로지와 어휘 유사도에 기반하여 단말노드 사이의 후보매칭을 계산한다. 또한 문맥 정보를 반영하는 제안된 경로 유사도 비교를 통해 후보매칭간계 중에서 최종 매칭 결과를 선택한다. 특히 제안된 방법은 기존 연구와 달리 사용자 피드백에 의해 점증적으로 갱신되는 온톨로지에 기반한다. 제안된 온톨로지는 IsA나 PartOf와 같은 다양한 관계를 표현할 수 있기 때문에 일대일 매칭은 물론이고 다대일 및 일대다 관계의 복합매칭을 계산할 수 있다. 제안된 알고리즘의 성능 평가를 위해 다양한 도메인의 XML 스키마를 대상으로 실험한 결과, 평균 97%의 정확률과 83%의 재현율을 나타내어 기존 연구보다 우수하였다. 특히 제안된 온톨로지의 갱신을 통하여 약 9%의 성능 향상을 확인할 수 있었다.

• Journal of applied mathematics & informatics
• /
• 제29권3_4호
• /
• pp.563-572
• /
• 2011

In this paper, the Lie symmetry analysis is performed on the three mixed second-order PDEs, which arise in fluid dynamics, nonlinear wave theory and plasma physics, etc. The symmetries and similarity reductions of the equations are obtained, and the exact solutions to the equations are investigated by the dynamical system and power series methods. Then, the exact solutions to the general types of PDEs are considered through a variable transformation. At last, the symmetry and integration method is employed for reducing the nonlinear ODEs.

• Journal of Microbiology
• /
• 제34권3호
• /
• pp.248-254
• /
• 1996

$cdc103^+$ gene in Schizosaccharomyces pombe which is similar to the CDC3 gene in Saccharomyces cerevisiae was cloned and sequenced. Comparison of the predicted amino acid sequences of $cdc103^+$ and CDC3 revealed that they share significant similarity (43% identity and 56% identity or similarity) to each other. The gene product of CDC3 in S. cerevisiae is known to be a highly ordered ring of filaments that lies just inside the cytoplasmic membrane in the region of the mother-bud neck. In order to characterize the gene product of $cdc103^+$ in Schizosaccharomyces pombe, fusion proteins were used to generate the polyclonal antibodies specific for the gene product (cdc103p). In immunofluorescence experiments, these antibodies decorate the region of the septum formation as a double ring structure late in the cell division cycle.

• 한국통신학회논문지
• /
• 제32권12A호
• /
• pp.1346-1353
• /
• 2007

본 논문에서는 필터함수의 감쇄극점(poles)과 반사손실(Return Loss)로부터 전송계수($S_{21}$)와 반사계수($S_{11}$)를 도출하고, 이 값들로부터 대역통과필터 설계를 위한 결합계수행렬 계산법을 제시하였다. 계산된 결합계수행렬에 유사변환을 적용하여서 결합계수행렬을 접힌 표준형 필터 구조의 커플링계수 행렬로 변환하였다. 그 결과를 이용하여 접힌 표준형 필터를 설계하였다.

• 대한전기학회논문지
• /
• 제45권3호
• /
• pp.407-414
• /
• 1996

In this paper we consider the variable structure control for a class of discrete-time uncertain multivariable systems where the nominal system is linear. Discrete-time switching dynamics are introduced so that a new type of state trajectories called sliding mode may exist on the sliding surface by state feedback. The quantitative analysis for the matched uncertainties will show that every response of the system with the proposed switching dynamics is bounded within small neighborhoods of the state-space origin. Also, by the similarity transformation it will be shown that the eigenvalues of the closed-loop systems are composed of those of the subsystems which govern the range-space dynamics and null-space dynamics. It will be also shown that ideal sliding mode can be obtained in the absence of uncertainties due to one-step attraction to the sliding surface regardless of initial position of states. (author). 12 refs., 2 figs.

• Journal of the Optical Society of Korea
• /
• 제13권1호
• /
• pp.131-138
• /
• 2009

The similarity between two groups of displaying methods is demonstrated in two ways, analytically and experimentally. A variety of layouts of the integral photography and display devices based on the point light source model is classified and analyzed in terms of projections and common/separate image planes. In particularly, the transformation matrix is found. Simulation experiments based on the image processing were performed. The layouts, analytical formulas, and experimental results show the similarity of both groups for several layouts.

• International Journal of Contents
• /
• 제9권2호
• /
• pp.1-7
• /
• 2013

This paper proposes an efficient matching algorithm based on ASIFT (Affine Scale-Invariant Feature Transform) which is fully invariant to affine transformation. In our approach, we proposed a method of reducing similar measure matching cost and the number of outliers. First, we combined the Manhattan and Chessboard metrics replacing the Euclidean metric by a linear combination for measuring the similarity of keypoints. These two metrics are simple but really efficient. Using our method the computation time for matching step was saved and also the number of correct matches was increased. By applying an Optimized Random Sampling Algorithm (ORSA), we can remove most of the outlier matches to make the result meaningful. This method was experimented on various combinations of affine transform. The experimental result shows that our method is superior to SIFT and ASIFT.