• Korean Journal of Heritage: History & Science
• /
• v.50 no.4
• /
• pp.148-165
• /
• 2017

Mural paintings drawn inside ancient tombs are very sensitive to changes in the environment such as temperature and humidity, especially the finish layer of the tomb murals differ in preservability depending on the material properties and humidity conditions. In this study, I examined the mural painting of Songsan-ri Tomb No.6, where the finish layer was made of earth, and identified the physical changes that can occur due to drying, depending on the material properties of the finish layer. I found out through particle size analysis that the finish layer of the mural painting in Songsan-ri Tomb No.6 is about 85.0wt% below silt, about 14.0wt% clay therein, mostly composed of silt and below clay. I also found out through physical property evaluation that surface change rate of samples showed the largest change at 15.5% in reproduced finish layer sample made up of bentonite, followed by 7.8% of reproduced finish layer sample made up of celadon soil, 6.3% of reproduced finish layer sample made up of loess, 6.2% of reproduced finish layer sample composed of white clay and the same order of change in appearance was confirmed in each sample consisted of soil. In addition, it showed the same trend of surface change rate, and the bentonite condition showed the largest change, in the measurement of shrinkage rate and expansion rate. The experiment shows that the finish layer composed of soil is affected by cohesion among particles according to the content of fine parts and the relationship between the agglomeration due to the content of the differentiated part and the stress due to the expansibility depending on the kind of the clay mineral etc. Therefore, it can be concluded that the physical damage occurred in the mural painting finish layer of the Songsan-ri Tomb No.6 is related to the factors such as the material characteristics of the soil and the highly humid environmental change inside the tomb.

• Journal of Korean Society of Forest Science
• /
• v.100 no.3
• /
• pp.483-493
• /
• 2011

Erosion control dams play a primary role in preventing or controlling natural disasters (landslide and debris flow etc.) and also conserve ecosystem in forested watersheds. This study examines structural characteristics of the dams such as the height of ecosystem control and the ecosystem permeability of the erosion control dams under standard drawings and the existing construction works. The objective of this study was to characterize the type classification of erosion control dams as ecosystem. Average permeability was highest on eco-piller dam (63.0%), followed in increasing order by wire rope (13.9%), silt dam (10.9%), multifunctional dam (7.2%), and gravity dam (0.4%). The height of ecosystem control was highest on gravity dam (3.2 m), followed in increasing order by multifunctional dam (1.7 m), wire rope dam (1.2 m), silt dam (0.6 m), and eco-piller dam (0.0 m). Criteria for defining the height of ecosystem control was indefinite. We grouped erosion control dams into three functional types (eco-connection, eco-semi connection, and eco-disconnection) by considering physical and structural characteristics such as the ecosystem permeability and the height of ecosystem control. The type of eco-connection (permeability > 20%) had connection areas from streambed to adjacent riparian areas, and these connection areas serve as ecosystem corridors for fauna and flora. Typical wildlife species includes mammals, reptiles, amphibians, and fishes. The type of eco-semi connection (5% < permeability < 20%) had < 2 m in the eco-barrier height from streambed, however, this type of dams partially serve as wildlife corridors and often provide fish ways. The type of eco-disconnection (permeability < 5%) had > 2 m in the eco-barrier height from streambed, thereby preventing wildlife movement.

• Korean Journal of Ecology and Environment
• /
• v.54 no.1
• /
• pp.24-38
• /
• 2021

Microhabitat In the upper stream is created by various environment variables such as the bottom substrate and the physicochemical factors, and may influence the distribution of benthic macroinvertebrates. We investigated the bottom substrate and environmental variables influencing the distribution of benthic macroinvertebrate in 26 stream-type waterways established at upper reaches of Geum River. During study period, total 85 families, 160 species, 9305 individuals of benthic macroinvertebrates were recorded. The stream-type waterways, where the bottom substrates consist mainly of pebble (16~64 mm) and cobble (64~256 mm) or with rapid water velocity (more than 0.2 m/s) and high dissolved oxygen (more than 120%), were supported by high species diversity of benthic macroinvertebrate. Hierological cluster analysis and the nonparametric multidimensional scale (NMDS) divided 26 stream-type waterways into a total of three clusters. In Cluster 1, the invertebrate species, such as Branchiura sowerbyi, Cloeon dipterum, Ischnura asiatica, Paracercion calamorum, and Radix auricularia, closely related to aquatic macrophytes, and Chironomidae spp., Limnodrilus gotoi, and Tanypodinae sp. were abundant in waterways, with high coverage of silt and clay as well as high turbidity and total nitrogen. The benthic macroinvertebrate species (Cheumatopsyche brevilineata, Drunella ishiyamana, Dugesia japonica, Ephemera orientalis, Gumaga KUa, Macrostemum radiatum, Potamanthus formosus, Semisulcospira libertine, Stenelmis vulgaris, and Teloganopsis punctisetae) included in Cluster 2 were dominated in sites with high cover rates of pebble and gravel. Cluster 3 was predominantly covered by the Cobbles, was supported by Simulium sp. Such a clear distinction in the study sites means that each stream-type waterways is governed by a clear habitat environment. In the case of some sites with low species diversity, improvement measures are required to restore nature, such as improving the function of inflows and outflows, creating meandering channel, and inducing the settlement of littoral vegetation.

• 한국해양학회지
• /
• v.27 no.4
• /
• pp.277-289
• /
• 1992

Kyeonggi Bay, a macrotidal coastal embayment in the Yellow Sea coast of central korea, is fringed by vastly developed tidal flats. About 400 surface sediment samples were collected from the intertidal and subtidal zones of Kyeonggi Bay for a study of the sediment distribution pattern and the surface sediment characteristics of this environment. The kyeonggi Bay surface sediment becomes progressively finer in the shoreward direction, from offshore sand to shoreward silty sand and sandy silt. This shoreward-fining trend is repeated again on the tidal flat and, as a consequence, a grain-size break occurs near the low-water line which separates the intertidal area from the subtidal one. The intertidal and subtidal sediments differ from each other in textural characteristics such as mean grain size and skewness and this can be interpreted to result from differences in hydraulic energy and morphology between the two environments. The mineral and chemical compositions of the Kyeonggi Bay sediments are largely controlled by the sediment grain size. Smectite was nearly absent in the clay mineral assemblage of Kyeonggi Bay sediment. The contents of Co, Cu and Ni were high in the Banweol tidal flat, which suggests a continuous process of accumulation of these metals. the intertidal environment appears to respond rapidly to artificial coastal modifications, the effects of which should be taken into consideration when planning a dam construction or coastal reclamation.

• Korean Journal of Environmental Agriculture
• /
• v.24 no.1
• /
• pp.34-39
• /
• 2005

To investigate the germanium content in paddy soil in Gyeongnam province, 310 paddy soil samples were collected at 19 areas in Gyeongnam, Ulsan and Busan. Contents of germanium in paddy soils were analyzed in different topographies, soil types and soil textures. Average content of germanium in Gyeongnam was 0.24 mr/kg, those of Masan, Jinju and Hadong were above 0.30 mg/kg. Germanium content with different topographies were no difference. Germanium contents in different soil types were 0.27 mg/kg in well adapted soil and 0.23 mg/kg in poorly drained soil. Germanium contents in different soil textures were 0.27 mg/kg in silt loam and 0.23 mg/kg in sandy loam. To determine germanium content on agricultural product in the field, content of germanium in cereals, vegetables and fruits were analyzed. Germanium content of agricultural product was high in the order of cereals>vegetables>fruits. In case of vegetables, germanium contents were high in the order of leaf vegetables>root vegetables>fruit vegetables. Germanium contents were high with 62 and $65{\mu}g/kg$ in lettuce and young radish, respectively. To analyze the germanium content in medicinal plant, samples were collected from 19 medicinal plants at Hamyang areas. Germanium contents in Angelica keiskei, Ligusticum chuanxiong, Panax ginseng and Atractylodes macrocephala were relatively high with $100{\mu}g/kg$ above.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.3
• /
• pp.399-403
• /
• 2012

The management of heavy metals in soil is important for environmental-friendly agriculture and keeping an ecosystem healthy. In this study, we examined the concentrations of heavy metals (Cd, Cr, Cu, Ni, Pb, Zn, and As) in 260 paddy soils sampled from Gyeongnam Province. The concentrations of the heavy metals were 0.143 mg $kg^{-1}$ (ranged 0.003-0.537) for Cd, 0.322 (0.002-0.986) mg $kg^{-1}$ for Cr, 25.41 (6.03-76.19) mg $kg^{-1}$ for Cu, 16.36 (2.63-32.94) mg $kg^{-1}$ for Ni, 18.67 (4.16-87.02) mg $kg^{-1}$ for Pb, 71.76 (22.99-153.58) mg $kg^{-1}$ for Zn, and 3.516 (0.002-19.481) mg $kg^{-1}$ for As, respectively. In addition, the concentration of Cd was highest in mountain foot-slope, Ni and As were highest in diluvial terrace, and Zn was highest in marine plains. Higher concentrations of Cd, Cu, and Zn were found in silty clay loam soils compared to silt loam, sandy loam, and loam soils.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.6C
• /
• pp.285-293
• /
• 2012

The surface tension, which is generated in the unsaturated soils, increases the stiffness of the soils. The objective of this study is to estimate the effect of the surface tension, which varies according to the temperature, on the shear wave velocity. Nine specimens, which have the different degree of saturation (0%, 2.5%, 5%, 10%, 20%, 40%, 60%, 80%, 100%), are prepared by using sand-silt mixtures. Experiments are carried out in a nylon cell designed for the measurement of shear waves. A pair of bender elements, which are used for the generation and detection of shear waves, is installed as a cross-hole type. The shear waves are continuously monitored and measured as the temperature of specimens decreases from $15^{\circ}C$ to $1^{\circ}C$. The results show that shear wave velocities of the fully saturated and fully dried specimens change a little bit as the temperatures of specimens decrease. However, the shear wave velocities of the specimens with the degree of saturations of 2.5%, 5%, 10%, 20%, 40%, 60% and 80% continuously increase as temperature decreases from $15^{\circ}C$ to $1^{\circ}C$. Furthermore, a fully saturated specimen is dried at the temperature of $70^{\circ}C$ in order to observe the shear waves according to degree of saturation. The shear wave velocities measured at the temperature of $70^{\circ}C$ are generally lower than those measured at temperature of $15^{\circ}C$. This study demonstrates that the dependence of shear wave velocities on the temperature according to the degree of saturation should be taken into account in both laboratory and field tests.

• Journal of the Korean GEO-environmental Society
• /
• v.17 no.4
• /
• pp.33-37
• /
• 2016

The hydration process of Controlled Low Strength Material (CLSM) used for backfill is the primary factor to determine the construction period. The objective of this study is to monitor the hydration process of CLSM using the Time Domain Reflectometry (TDR) and to establish the relationship between dielectric constant and compressive strength. The CLSM specimen is composed of cement, flyash, silt, sand, accelerator, and water. The material characteristics of the CLSM including flow, unit weight, compressive strength are investigated. To measure the dielectric constant of the CLSM during the curing time, TDR probe incorporated with a mold and a reflectometer are used. Experimental results show that the dielectric constant remains constant at early stage, and then decreases as the curing time increases. In addition, the dielectric constant is related to the compressive strength in inverse power function. This paper suggests that the TDR technique may be used as a non-destructive testing method in order to estimate the compressive strength of the CLSM mixture under construction.

• Economic and Environmental Geology
• /
• v.30 no.6
• /
• pp.567-586
• /
• 1997

Concentrations of several heavy metals in soils derived from black shale and slate have been reported to be higher than the average concentrations in non-polluted soils. This study describes and characterizes soil minerals, and investigates the distribution of heavy metals in soils, and then examines their relationship. Soils in the study area are mainly consist of guartz and feldspars with minor amount of kaolin, illite, vermiculite, chlorite and illite-vermiculite interstratified minerals. Mineral compositions are similar in mountain-, farmland-, and paddy-soils. The residual soils derived from sandy phyllites contain less illites than those from black shale and black slate. Heavy metals appear to be more concentrated in soils than in rocks. The concentrate ratios in soils to rocks ranges 1.1 times for Cr, 2 for Cu, 1.4 for Ni. The contour maps of Cd, Zn, Pb, Cu contents using 0.43N $HNO_3$-extraction imply that these elements are highly concentrated in the soils near the past uranium exploration region, coal seams, black slate beds and tailings than other parts of the study area. The proportions of the day in most soils are less than 10%. In spite of small proportions of the clay, the concentrations of heavy metals from clay fractions to the total concentrations are high: 1~2.4 times for Co, 1.4~2.5 for Cu, 1.2~2.6 for Ni, 1~5 for Pb, 1~2.7 for Zn and 1.6~1.8 for Cr and V. The contents of organic carbons in clay fractions are also 1.5~3.9 times higher than in silt and sand fractions. Cu, Pb and organic carbons show positive relationship in all size fractions. In the size-fractionated soil profile samples, the contents of heavy metals and organic carbons show analogous trends with depth. For the clay fractions of soil profile samples, the contents of heavy metals with depth have analogous trends to abundances of vermiculites, which have the high CEC in main clay minerals.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.13 no.3
• /
• pp.46-62
• /
• 2010

This study was conducted to understand the water and soil properties to propose the promotion of vegetation environment at farm pond depression. We selected 8 palustrine wetlands from agricultural area after consideration of human interference, surround land use, and size of area. Water quality analysis showed that the average SS, T-N, T-P were over the limit of agricultural water quality standard level at some sites. The cause for deterioration of water quality is supposed by the long-term stagnation of water in palustrine wetland. The recommended measures to improve water quality are as follows; improving water circulation by connecting with nearby natural water, preventing oxygen depletion by dredging deposit, lowering down T-N and T-P by removing autumn plants, preventing inflow of phosphorus in fertilizer ingredients which is the main cause for high T-P. The soil contamination of the surveyed area was about the same level of average heavy metal contents in soils from 2,010 paddy fields in Korea, which was much lower than soil contamination standards. As for soil texture, sand content was 40~90% and clay content was less than 20%. The content of silt and clay in soil from community of floating-leaved:submerged hydrophytes and community of emergent hydrophytes was higher that of soil from community of hygrophytes, and the content of sand in soil from community of hygrophytes was 10% higher than underwater soil. In terms of bulk density, the average was 0.24~0.96g/$cm^3$, which was quite low, because of high content of peat and organic matter in soil of the surveyed area. As for the average content of organic matter, community of floating-leaved:submerged hydrophytes was 18.25g/kg, community of emergent hydrophytes was 16.88g/kg, and community of hydrophytes was 25.63g/kg. The range of content of T-N in soil of community of floating-leaved；submerged hydrophytes was 0.022~0.307%, and that of community of emergent hydrophytes was 0.029~0.681% and that of community of hydrophytes was 0.088~0.325%. Apart from three sites in the surveyed area, most parts were over the standards or below the standard. After this study, we will conduct and discuss the relationship between vegetation characteristics and environments, which will be used of the best practical management and restoration of wetland.