• Journal of Biomedical Engineering Research
• /
• v.18 no.1
• /
• pp.87-96
• /
• 1997

A pixel profile in the conventional DANTE sequence is so poor that the excited area by DANTE sequence is a small portion of a pixel. This causes poor signal to noise ratio in DANTE image. In this paper, a frequency modulated(FM) DANTE imaging sequence is proposed to improve pixel profile in DANTE image. A DANTE pulse train is shaped by an FM function so that all the spins within a pixel are excited, thereby improving the signal to noise ratio. It also shows that the pixel profiles are dependent on the sweep in FM signal. Computer simulations and experimental result obtained using a 7.0 T NMR imaging system are presented.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.5 no.1
• /
• pp.38-43
• /
• 1994

Though normal vocal cords show regular vibration, pathologic vocal cords show irregularity between peaks. Jitter means fluctuation in the time interval between peaks, and Shimmer means cycle to cycle variation in the amplitude of the peaks. We investigated the vocal vibration of Korean normal persons objectively. The fundamental frequency, Jitter, Shimmer and SNR(signal to noise ratio) of normal persons were compared with that of vocal Polyp Patients with CSpeech Program for the possibility of distinguishing the pathologic vocal vibration from normal. The results were as follows ; Comparing the fundamental frequency of vocal Polyp Patients with normal persons, great change was noted only in female cases. But the Jitter and Shimmer of vocal polyp patients were greater than normal significantly in both male and female cases. SNR was lower than normal in vocal polyp patients. In the conclusion, fundamental frequency, Jitter, Shimmer and SNR might be meaningful parameters distinguisuing pathologic vibration from normal.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.8 no.1
• /
• pp.135-141
• /
• 1999

Recently, advance signal analysis which is called "Time-Frequency Analysis" has been developed. Wavelet and Wigner Distribution are used to the method. Wavelet transform(WT) is applied to time-frequency analysis of waveforms obtained by an ultrasonic pulse-echo technique. The Gabor function is adopted as the analyzing wavelet. Wavelet analysis method is an attractive technique for evolution of material characterization evoluation. In this paper, the feasibility of suppression of ultrasonic background noise signal using WT has been presented. These results suggest that ultrasonic background noise ginal can be suppressed and enhanced even for SNR of 20.8 dB. This property of the WT is extremely useful for the detecting flaw echos embedded in background noise.und noise.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.7C
• /
• pp.413-420
• /
• 2011

This paper proposes a new adaptive algorithm to cancel the acoustic feedback and noise signals in the binaural hearing aids. The convergence performances of the proposed algorithm are improved by updating coefficients of the feedback canceller after the speech signal is cancelled from the residual signal with dual microphones. The feedback canceller firstly cancels the feedback signal from the microphone signal, and then the noise canceller reduces the noise by the beamforming method. To assure that binaural hearing aids converge stably, the left-sided hearing aid only is converged firstly, next the right-sided hearing aid only is converged. To verify performances of the proposed algorithm, simulations were carried out for a speech. As the results of simulations, it was proved that we can advance 14.43dB SFR(Signal to Feedback Ratio) on the average for the feedback canceller, 10.19dB SNR(Signal to Noise Ratio) improvement on the average for the noise canceller, in case that this algorithm is used.

• ETRI Journal
• /
• v.33 no.4
• /
• pp.528-536
• /
• 2011

In this paper, we analyze the location accuracy of real-time locating systems (RTLSs) in multipath environments in which the RTLSs comply with the ISO/IEC 24730-2 international standard. To analyze the location error of RTLS in multipath environments, we consider a direct path and indirect path, in which time and phase are delayed, and also white Gaussian noise is added. The location error depends strongly on both the noise level and phase difference under a low signal-to-noise ratio (SNR) regime, but only on the noise level under a high SNR regime. The phase difference effect can be minimized by matching it to the time delay difference at a ratio of 180 degrees per 1 chip time delay (Tc). At a relatively high SNR of 10 dB, a location error of less than 3 m is expected at any phase and time delay value of an indirect signal. At a low SNR regime, the location error range increases to 8.1 m at a 0.5 Tc, and to 7.3 m at a 1.5 Tc. However, if the correlation energy is accumulated for an 8-bit period, the location error can be reduced to 3.9 m and 2.5 m, respectively.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.23 no.3
• /
• pp.204-212
• /
• 2020

For general target tracking works by receiving a set of measurements from sensor. However, if the SNR(Signal to Noise Ratio) is low due to small RCS(Radar Cross Section), caused by remote small targets, the target's information can be lost during signal processing. TBD(Track Before Detect) is an algorithm that performs target tracking without threshold for detection. That is, all sensor data is sent to the tracking system, which prevents the loss of the target's information by thresholding the signal intensity. On the other hand, using all sensor data inevitably leads to computational problems that can severely limit the application. In this paper, we propose an iterative Joint Integrated Probabilistic Data Association as a practical target tracking technique suitable for a low SNR multi-target environment with real time operation capability, and verify its performance through simulation studies.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.687-690
• /
• 1999

Many high-resolution algorithms based on the eigen-decomposition analysis of observed covariance matrix, such as MVE, MUSIC, and EVM, have been proposed. However, the resolution of spectral estimates for these algorithms is severely degraded when Signal-to-Noise Ratio (SNR) is low and arrival angles of signal are close to each other. And EVM and MUSIC is powerful for the characteristic of SNR. But have the limitation that the number of signals presented is known. While MVE is bad the characteristic of SNR. In this study, we propose a modified MVE to enhance the resolution for Direction-Of-Arrival (DOA) estimation of underwater acoustic signal. This is to remove the limitation that existing algorithms should know the information for the number of signals. Because the algorithms founded on the eigen value estimate DOA with only the noise subspace, they have the high-resolution characteristic. And then, with the method reducing the effect of the signal subspace, we are to reduce the degradation because of complementary relationship between the signal subspace and the noise subspace. This paper, with using the simulation data, we have estimated the proposed algorithms, compared it with other high-resolution algorithms. The simulation results show that the modified MVE proposed is accurate and has a better resolution even though SNR is low, under the same condition.

• Journal of Environmental Science International
• /
• v.25 no.9
• /
• pp.1241-1251
• /
• 2016

A minimum threshold for the signal to noise ratio ($SNR_{min}$) has to be set in the data processing system of wind profiler radar (WPR). The data collection rate and the accuracy of the WPR wind vector depend on the $SNR_{min}$. The WPR at Uljin is operated with an $SNR_{min}$ of 1 dB which is a relatively large threshold. We found that the accuracy and the continuity of the WPR wind vector with height were directly related to the variability of the SNR and vertical gradient of the squared refractive index. We investigated a quantitative method for determining a new $SNR_{min}$ for the WPR at Uljin and it was evaluated with radiosonde data. The accuracy and continuity of the wind vector from an SNR of less than 1 dB, began to decrease at an altitude of 3.5 km. Most of the SNR values were less than -3.5 dB in altitudes higher than 3.5 km. We retrieved high-accuracy wind vectors at altitudes over 3 km where measurements were deficient with an $SNR_{min}$ of 1 dB.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.12 no.1
• /
• pp.27-35
• /
• 1987

Digital filter suffer from roundoff noise and adder overflows due to finite word length effects. Scaling is an attempt to internal signal levels such that all signals are as large as possible, yet without the occurrence of overflows. Scaling requirements are implemented by the use of transformer. This paper proposes a procedure for scaling wave digital filters to avoid overflow problems and at the same time maximizing the output signal-to-noise ratio. Results indicate that the scaled networks have an improved signal to noise ratio over th unscaled filters under the condition that there be no overflow occuring.

• Journal of radiological science and technology
• /
• v.40 no.3
• /
• pp.385-392
• /
• 2017

The purpose of this study is to investigate the image quality and exposure dose according to kVp and mAs in CT and to confirm improvement in image quality according to None IR and IR(Iterative Reconstruction) levels. Measurement results of image quality using Image J, HU(Hounsfield units) and BN(Background Noise) are decreased, while SNR(Signal to Noise Ratio) and $CTDI_{vol}$(CT dose index volume) are increased as the kVp increases and there was no change of BHU(Background Hounsfield units). BN was reduced due to increased kVp, while SNR and $CTDI_{vol}$ were increased. Also, the higher IR stage, the lower BN, SI(Signal Intensity) and HU while SNR was improved by about 10~60%. Based on this, when applying IR for clinical applications, it is necessary to finely adjust kVp and mA with a phased approach.