• Journal of Electrical Engineering and Technology
• /
• v.9 no.1
• /
• pp.372-377
• /
• 2014

Being able to monitor the heart will allow the diagnosis of heart diseases for patients during daily activities, and the detection of burden on the heart during strenuous exercise. Furthermore, with the help of U-health technology, immediate medical action can be taken, in the case of abnormal symptoms of the heart in daily life. Therefore, it appears to be necessary to develop the corresponding technology to monitor the condition of the heart daily. In this study, a novel wearable smart system was proposed, to monitor the activity of the heart in daily life, and to further evaluate the rhythm of arrhythmia. The wearable system includes three modified bipolar conductive fiber electrodes in the chest part, which can resolve the reduction problem of the magnitude of the signal, by magnifying the signal and removing the noise, to obtain high affinity and validity for medical-type usage (<0.903%). The biological signal acquisition and data lines, and the signal processing engine and communication consist of a conductive ink, and the pic18 and ANT protocol nRF24AP2, respectively. The proposed algorithm was able to detect a strong ECG, signal and r-point passing over the noise. The confidence intervals were 96 %, which could satisfy the requirement to detect arrhythmia under the unconstrained conditions.

• Journal of the Institute of Convergence Signal Processing
• /
• v.3 no.2
• /
• pp.58-63
• /
• 2002

One of the important problems of OFDM system is the large PAPR of the output signal, which can result the significant signal distortion in presence of nonlinear amplifiers. To reduce the PAPR, we use fundamentally the level clipping and propose the modified mapping/demapping method for effective reducing the PAPR of the OFDM signals with level clipping. We can significantly improve the BER performance characteristics for the OFDM system. We discussed, through extensive computer simulations, the effects of level clipping and modified mapping/demapping method on the performance of OFDM system including the trade off between bandwidth expansion and BER performance and between bandwidth efficiency and BER performance.

• Journal of Biomedical Engineering Research
• /
• v.35 no.3
• /
• pp.42-49
• /
• 2014

We propose an individual identification method using a single-lead electrocardiogram signal. In this paper, lead I ECG is measured from subjects in various physical and psychological states. We performed a noise reduction for lead I signal as a preprocessing stage and this signal is used to acquire the representative beat waveform for individuals by utilizing the ensemble average. From the P-QRS-T waves, features are extracted to identify individuals, 19 using the duration and amplitude information, and 16 from the QRS complex acquired by applying Pan-Tompkins algorithm to the ensemble averaged waveform. To analyze the effect of each feature and to improve efficiency while maintaining the performance, Relief-F algorithm is used to select features from the 35 features extracted. Some or all of these 35 features were used in the support vector machine (SVM) learning and tests. The classification accuracy using the entire feature set was 98.34%. Experimental results show that it is possible to identify a person by features extracted from limb lead I signal only.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.1578-1581
• /
• 2002

In this paper, the accuracy of the direction-of-arrival (DOA) estimation of signal impinged on the uniform linear array (ULA) is investigated. The conventional beamformer and Capon’s beamformer categorized in beamformaing techniques as well as MUSIC (MUlti-pie Signal Classification) and ESPRIT (Estimation of Signal Invariance Techniques) categorized in subspace- based methods are employed to estimate the DOAs. From the simulation result under uncorrelated environment, MUSIC can prominently distinguish the DOAs while the beamforming techniques cannot demonstrate the DOAs as clear as MUSIC does. Moreover, Uni-tary ESPRIT is employed to estimate the DOAs under uncorrelated signal conditions. By means of Uni-tary ESPRIT, the estimation has more accuracy with the computational-time reduction. In addition, it incorporates forward-backward averaging; thus Unitary ES-PRIT can overcome the problem of the coherent signal condition.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.4
• /
• pp.395-404
• /
• 2016

A 6-bit 3.4 GS/s flash ADC in a 65 nm CMOS process is reported along with the proposed 4x time-domain interpolation technique which allows the reduction of the number of comparators from the conventional $2^N-1$ to $2^{N-2}$ in a N-bit flash ADC. The proposed scheme effectively achieves a 4x interpolation factor with simple SR-latches without extra clocking and calibration hardware overhead in the interpolated stage where only offset between the $2^{N-2}$ comparators needs to be calibrated. The offset in SR-latches is within ${\pm}0.5$ LSB in the reported ADC under a wide range of process, voltage supply, and temperature (PVT). The design considerations of the proposed technique are detailed in this paper. The prototype achieves 3.4 GS/s with 5.4-bit ENOB at Nyquist and consumes 12.6 mW power at 1 V supply, yielding a Walden FoM of 89 fJ/conversion-step.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.6 no.1
• /
• pp.91-107
• /
• 2003

A 2-dimensional search process in the time and frequency domain is required to acquire the GPS signal, when the code phase and the carrier Doppler for the specified GPS satellite signal are unknown. This paper proposes a new scheme, called Squared-D Searching Method, which can reduce the number of carrier frequency candidates, and a new scheme, named extended Multiple Correlator(XMC), which can reduce the number of code phase candidates. The Squared-D Searching Method can take the twice of Doppler frequency, therefore it can find carrier frequency candidates. The XMC is different from the general multiple correlator in that a combined form of the locally generated codes is used for despreading. Also, this paper tries to analyze a signal detection probability of a GPS receiver under more realistic environments. The result shows that lower detection probability can be obtained when the phase differences among the codes are larger in the correlation arms of a multiple correlator. This phenomenon is not easy to explain with the previous results. And besides, the result shows that proposed acquisition schemes give better performance than a conventional acquisition scheme.

• Journal of the Institute of Convergence Signal Processing
• /
• v.9 no.1
• /
• pp.10-17
• /
• 2008

The purpose of this thesis is to reduce of error for source location through acoustic emission(AE) signal, generated elastic wave from crack growth to leak for facility diagnosis. Especially, in order to overcome noise from original signal, this paper proposed enhancement of source location by using noise reduction based on wavelet transform. To evaluate actual performance in experiments, Pencil Lead Break is used crack signal source on the aluminum plate and drain valve of air compressor is used as substitute pressure vessel to generate leak signal. In signal processing, wavelet shrinkage and soft threshold are used to discriminate signal source and then source location techniques have been effectively used with group velocity using material property and time difference between sensor using cross correlation. Source location for crack and leak test have some difference, but the result show that improved 30% with a average length within 10.46mm in crack test and improved 2% compare with average filter in leak test when we applied wavelet transform.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.20 no.6
• /
• pp.15-21
• /
• 2010

In the recent years, various researches about the signal processing have been presented to improve the performance of power analysis. Among these signal processing techniques, the research about the signal compression is not enough than a signal alignment and a noise reduction; even though that can reduce considerably the computation time for the power analysis. But, the existing compression method can sometimes reduce the performance of the power analysis because those are the unsophisticated method not considering the characteristic of the signal. In this paper, we propose the new PCA (principal component analysis)-based signal compression method, which can block the loss of the meaningful factor of the original signal as much as possible, considering the characteristic of the signal. Also, we prove the performance of our method by carrying out the experiment.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.1
• /
• pp.175-183
• /
• 2016

This paper brings out a novel method for reducing Near end and Far end Crosstalk using Electromagnetic Band Gap structures (EBG) in High Speed RF transmission lines. This work becomes useful in high speed closely spaced Printed Circuit Board (PCB) traces connected to multi core processors. By using this method, reduction of −40dB in Near-End Crosstalk (NEXT) and −60 dB in Far End Crosstalk (FEXT) is achieved. The results are validated through experimental measurements. Time domain analysis is performed to validate the signal integrity property of coupled transmission lines.

• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.416-418
• /
• 2006

In this paper, a new acoustic echo cancellation approach based on the DUET algorithm and scaling factor estimation is proposed to solve the scaling ambiguity in case of blind separation based acoustic echo cancellation in a noisy environment. In hands-free full-duplex communication system. acoustic noises picked up by the microphone are mixed with echo signal. For this reason, the echo cancellation system may provide poor performance. For that purpose, a degenerate unmixing estimation technique, adjusted in the time-frequency domain, is employed to separate undesired echo signals and noises. Also, since scaling and permutation ambiguities have not been solved in the blind source separation algorithm, kurtosis for the desired signal selection and a scaling factor estimation algorithm are utilized in this rarer for the separation of an echo signal. Simulation results demonstrate that the proposed approach yields better echo cancellation and noise reduction performances, compared with conventional methods.