• 전기학회논문지
• /
• 제67권7호
• /
• pp.860-864
• /
• 2018

The signal of space charge distribution measured in polymer insulating materials by the PEA has some noises due to the system circuits and the ringing phenomena in the sensor of PVDF and so on forth. It's magnitude mainly depends on the thickness of the insulation material, and it is also affected by the attenuation and dispersion when traveling in a dielectric material. In order to make it reliable, the correcting process for the signal is essential. In this study, we proposed the new deconvolution process on the measured signal of space charge distribution in the flat XLPE insulator, and developed a new signal processing algorithm. Using this, we could improve the reliability of the measured signal much and analyze the effects of space charge clearly in materials.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2006년도 하계학술대회
• /
• pp.57-61
• /
• 2006

As high speed internet users are tremendously increasing, three are keenly in need of development of high speed portable internet technology which can provide high quality wireless internet service cheaply even in the mobile. Unlike the FDD-CDMA, TDD-OFDMA has relatively poor wave environment with inducing interference, fading and delay because it agrees to multi-carrier modulation method and time-division radio telecommunication system. To solve this problem, it is necessary to develop repeater operating by digital signal processing method which have more strict wireless channel control and wave signal processing technology over TDD telecommunication equipments. This thesis is dealing with design and implementation of Digital RF Repeater which implemented 'Synchronization Acquisition Unit', 'TDD signal switching Unit', 'Feedback Signal Cancellation Unit'. Over this argument, we will develop digital RF repeater with more cheap, more adaptive in wave environment like oscillation control, adaptive wave monitoring and output increasing and having control function as a result it will be helpful for success in high speed portable internet service business.

• 전기학회논문지
• /
• 제57권12호
• /
• pp.2300-2307
• /
• 2008

This study receives the noise transmitted in a constant audio frequency range through a microphone array in which the noise(like grease in a pan) occurs on the power supply line due to the troublesome partial discharge(arc). Then by going through a series of signal processing of removing noise, this study measures the distance and direction up to the noise caused by the troublesome partial discharge(arc) and monitors the result by displaying in the analog and digital method. After these, it determines the state of each size and judges the distance and direction of problematic part. When the signal sound transmitted by the signal source of bad insulator is received on each microphone, the signal comes only in the frequency range of 20 kHz by passing through the circuit of amplification and 6th low pass filter. Then, this signal is entered in a digital value of digital signal processing(TMS320F2812) through the 16-bit A/D conversion. By doing so, the sound distance, direction and coordinate of bad insulator can be detected by realizing the correlation method of detecting the arriving time difference occurring on each microphone and the algorithm of detecting maximum time difference.

• 융합신호처리학회논문지
• /
• 제6권1호
• /
• pp.33-38
• /
• 2005

데이터를 디지털화하거나 전송하는 과정에서 여러 가지 원인에 의해 열화가 발생하고 있으며, 이러한 열화의 주된 원인은 잡음이다. 따라서 잡음에 의해 훼손된 신호를 복원하기 위하여 웨이브렛을 이용한 방법들에 대한 연구가 활발히 진행되고 있다. 그리고 AWGN 환경에서 잡음을 제거하기 위한 가장 일반적인 연구 동향은 threshold에 기초한 방법들이다. 그러나 이러한 방법은 잡음에 대한 통계적인 특징만을 고려함에 따라 복원된 신호는 여전히 많은 잡음들을 포함한다. 따라서 본 논문에서는 웨이브렛 상세계수의 누적을 통한 새로운 신호 복원 방법을 제시하여, 신호의 edge 성분에 대한 복원과 잡음 제거 성능을 향상시켰다. 그리고 개선 효과의 판단 기준으로 SNR을 사용하였으며, 객관적인 판단을 위해 기존의 방법들과 비교하였다.

• 융합신호처리학회논문지
• /
• 제16권1호
• /
• pp.9-14
• /
• 2015

Outlier detection and removal is a crucial step needed for various image processing applications such as image registration. Random Sample Consensus (RANSAC) is known to be the best algorithm so far for the outlier detection and removal. However RANSAC requires a cosiderable computation time. To drastically reduce the computation time while preserving the comparable quality, a outlier detection and removal method based on modified K-means is proposed. The original K-means was conducted first for matching point pairs and then cluster merging and member exclusion step are performed in the modification step. We applied the methods to various images with highly repetitive patterns under several geometric distortions and obtained successful results. We compared the proposed method with RANSAC and showed that the proposed method runs 3~10 times faster than RANSAC.

• 대한인간공학회:학술대회논문집
• /
• 대한인간공학회 1997년도 춘계학술대회논문집
• /
• pp.107-113
• /
• 1997

In this paper, an interfacing method to control rehabilitation assitance system with bio-signal is proposed. Controlling with EMG signals method has certain advantage on signal-collecting, but has some drawbacks in the function resolution of EMG signals because data-processing process is not efficient. To improve function-resolution and to increase the efficiency of EMG signal interfacing with rehabilitation assistance system, Multi-layer Perception which is highly effective with static signal and hidden-Markov model for dynamic signal resolving are fused together. In proposed method. The direction and average speed of the rehabilitation assitance system are controlled by the trajectory control and estimation of the moving direction result from the fused model. From the experiment, proposed GMM and 2-level MLP hybrid-classifier yielded 8.6% perception-error rate, improving function resolution. New acceleration control method constructed with 3 nested linear filter produced continuous acceleration paths without the information of destination point. Thus, the mass output caused by non- continuous acceleration-deceleration was eliminated. In the simulation, the necessary calculation, in the case of multiplication, was reduced by 11.54%.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.84-89
• /
• 2001

Ultrasonic pulse echo method comes to be difficult to apply to the multi-layered structure with very thin layer, because the echoes from the top and the bottom of the layer are overlapped. Conventionally method, deconvolution technique has been used for the decomposition of overlapped UT signals, however it has disabilities when the waveform of the transmitted signal is distorted according to the propagation. In this paper, the wavelet transform based deconvolution (WTBD) technique is proposed as a new signal processing method that can decompose the overlapped echo signals in A-Scan signal with superior performances compared to the conventional deconvolution technique. Performances of the proposed method are shown by through computer simulations using model signal with noise and are demonstrated by through experiments for the fabricated acryl rod with a thin steel plate bonded to it.

• 융합신호처리학회논문지
• /
• 제9권1호
• /
• pp.10-17
• /
• 2008

본 논문은 설비진단에 있어 크랙 성장부터 누설에 이르기까지 결함으로 발생하는 AE 신호를 통하여 위치를 표정하여 진단 시스템의 오차를 줄이는 것이다. wavelet을 이용한 잡음 제거로서 위치표정의 개선을 제안하였고, 실험을 위한 신호원으로 알루미늄 평판에 샤프심 파단음을, 공기압축기의 누설음을 사용하였다. 신호원에 대하여 웨이블릿 Shrinkage방법과 Soft Threshold을 이용한 신호의 잡음제거 및 시간 도달차 법과 물성치를 적용한 속도 값으로 시뮬레이션을 통하여 위치표정 결과를 확인하였다. 그 결과 웨이블릿 변환을 이용한 잡음제거는 크랙실험의 경우 평균거리 10.46mm이하로 30% 이상과 누설 실험의 경우 평균필터에 비해 2%의 개선된 위치표정을 확인하였다.

• 융합신호처리학회논문지
• /
• 제8권4호
• /
• pp.293-296
• /
• 2007

본 논문에서는 벡터 미디언 값을 계산하기 위한 시스톨릭 어레이 구조의 벡터 미디언 필터 구조를 제안하였다. 컬러영상처리에서 벡터 신호는 빨강, 녹색 파랑의 3개의 요소로 이루어져 있다. 벡터 미디어 필터는 빨강, 녹색 파랑 요소로 이루어진 벡터 신호들 중에서 벡터 신호를 크기 순서대로 나열하였을 때 가운데 값을 갖는 벡터 신호를 구하는 필터로, 컬러 영상처리에서 기본적으로 많이 사용되는 필터이다. 벡터 신호가 N 개가 있을 때, 지금 까지 제안된 구조에서는(3N+1) 클럭이 필요하나, 제안된 구조에서는 (N+2) 클럭이 소요된다. 그리고 기존의 구조에서는 N 개의 입력 벡터 신호는 미디언 필터에 병렬로 입력되어야 하나 제안된 구조에서는 입력 신호는 직렬로 인가된다. FPGA를 사용하여 구현하였다.

• Structural Engineering and Mechanics
• /
• 제39권6호
• /
• pp.813-831
• /
• 2011

This paper presents an efficient version of Hilbert-Huang transform for nonlinear non-stationary systems analyses. An ensemble empirical mode decomposition (EEMD) is introduced to alleviate the problem of mode mixing between intrinsic mode functions (IMFs) decomposed by EMD. Yet the problem has not been fully resolved when a signal of a similar scale resides in different IMF components. Instead of using a trial and error method to select the "best" outcome generated by EEMD, a hybrid algorithm based on EEMD and EMD is proposed for multi-mode signal processing. The developed approach comprises the steps from a bandpass filter design for regrouping modes of the IMFs obtained from EEMD, to the mode extraction using EMD, and to the assessment of each mode in the marginal spectrum. A simulated two-mode signal is tested to demonstrate the efficiency and robustness of the approach, showing average relative errors all equal to 1.46% for various noise levels added to the signal. The developed approach is also applied to a real bridge structure, showing more reliable results than the pure EMD. Discussions on the mode determination are offered to explain the connection between modegrouping form on the one hand, and mode-grouping performance on the other.