• Journal of the Korean Wood Science and Technology
• /
• v.25 no.1
• /
• pp.23-27
• /
• 1997

Alkali-soluble extracts were prepared from barks of Japanese larch(Larix leptolepis). Siberian larch(Larix gmelineii) and Radiata pine(Pinus radiata) The effect of various factors, such as particle size, liquor ratio, extraction temperature, and reaction time, on the extracts yield was investigated. Particle sizes affected the alkali-soluble extracts; the finer the particle size, the higher extracts and extract efficiency. High temperature and high liquor ratio were more effective. In the range of 0.25% to 1% NaOH concentration, alkali extracts were increased with the increasing alkali concentration. However, extract yields were leveled off above 0.5% alkali concentration. Extractions with NaHCO3 were almost equivalent to those of NaOH extraction. 1% NaOH and 1% NaHCO3 resulted in the highest yields of alkaline extracts. Extracts from Japanese larch were lower than those from Siberian larch and Radiata pine barks. Siberian larch bark was the best raw material for tannin adhesives, because its extractive yield was higher than those of the other barks. Concerning pH of alkaline media during extraction, small increases of the extract yields were resulted at range of pH 7 to pH 9, while a large increases from pH 9.0 to pH 12. This phenomenon is attributed to higher alkalinity.

• Journal of Environmental Science International
• /
• v.25 no.6
• /
• pp.853-864
• /
• 2016

Meteo-tsunamis are tsunamis that are typically caused by strong atmospheric instability (e.g., pressure jumps) in low pressure systems, but some meteo-tsunamis in winter can be caused by local atmospheric instability in high pressure systems (e.g., the Siberian High). In this study, we investigated a meteo-tsunami event related to a high pressure system that occurred during winter on the Yellow Sea in 2005. Sea level data from tidal stations were analyed with a high-pass filter, and we also performed synoptic weather analyses by using various synoptic weather data (e.g., surface weather charts) collected during the winter season(DJF) of 2005. A numerical weather model (WRF) was used to analyze the atmospheric instability on the day of the selected event (21 Dec. 2005). On the basis of the results, we suggest that the meteo-tsunami triggered by the high pressure system occurred because of dynamic atmospheric instability induced by the expansion and contraction of the Siberian High.

• Journal of Korean Society of Forest Science
• /
• v.108 no.1
• /
• pp.133-137
• /
• 2019

This study was conducted to clarify the morphological characteristics of Siberian flying squirrel (Pteromys volans). We investigated 6 morphological characteristics from April, 2014 to March 2016 at Mt. Baekwoon, Wonju, Gangwon province. We found that Siberian flying squirrel showed female-biased sexual dimorphism. This result would be related to reproductive strategy of the species which female nurse offspring alone. As results of comparison of morphological characteristics from Korea, Finland and Japan, both body weight and head-body length appeared heavier and longer from high-latitude to low-latitude. This result suggest that morphological difference between different latitudes would be related with climate and habitat environment. The more researches would be needed with other morphological characteristics of Siberian flying squirrel.

• Proceedings of the National Institute of Ecology of the Republic of Korea
• /
• v.2 no.1
• /
• pp.1-14
• /
• 2021

The study has been carried out with an objective to prepare Siberian roe deer habitat potential maps in South Korea based on three geographic information system-based models including frequency ratio (FR) as a bivariate statistical approach as well as convolutional neural network (CNN) and long short-term memory (LSTM) as machine learning algorithms. According to field observations, 741 locations were reported as roe deer's habitat preferences. The dataset were divided with a proportion of 70:30 for constructing models and validation purposes. Through FR model, a total of 10 influential factors were opted for the modelling process, namely altitude, valley depth, slope height, topographic position index (TPI), topographic wetness index (TWI), normalized difference water index, drainage density, road density, radar intensity, and morphological feature. The results of variable importance analysis determined that TPI, TWI, altitude and valley depth have higher impact on predicting. Furthermore, the area under the receiver operating characteristic (ROC) curve was applied to assess the prediction accuracies of three models. The results showed that all the models almost have similar performances, but LSTM model had relatively higher prediction ability in comparison to FR and CNN models with the accuracy of 76% and 73% during the training and validation process. The obtained map of LSTM model was categorized into five classes of potentiality including very low, low, moderate, high and very high with proportions of 19.70%, 19.81%, 19.31%, 19.86%, and 21.31%, respectively. The resultant potential maps may be valuable to monitor and preserve the Siberian roe deer habitats.

• Journal of Korean Vacuum Science & Technology
• /
• v.6 no.4
• /
• pp.143-148
• /
• 2002

Method of plasma-immersion ion deposition of hydrogenated DLC films on relatively thick flat dielectric substrates from plasma of not-self-sustained low-pressure gas arc discharge is suggested. Coating properties have been investigated experimentally, average energy Per a deposited carbon atom depending on discharge current has been calculated. Optimum deposition parameters lot obtaining sufficiently hard and transparent high-adhesive a-C:H films on a 4-mm thick glass substrates have been determined. Possibility to use these coatings for photo-tools protection from abrasion wear at low operating loads is shown in general.

• Journal of the Korean Geographical Society
• /
• v.52 no.1
• /
• pp.1-13
• /
• 2017

This study aims to identify the warm and cold periods(WP, CP) of November appeared in the daily normals of daily minimum temperature of Seoul for 1941~1970 and 1971~2000 and to investigate synoptic characteristics of the temperature changes of WP and CP. The WP temperatures are increased clearly(p value 0.000), the CP temperatures are also warming but not significant statistically. In WP, there are not apparent trends corresponding the warming of WP temperature, in the Siberian High, Sea Level Pressure(SLP), 925hPa surface wind(U925, V925) around the Korean peninsula. In high period(1972~1979) of WP temperature, there are positive SLP anomaly and anomalous anticyclonic circulation pattern of 925hPa wind field over the Korean peninsula then the winter monsoon is weakened and the WP temperature is ascending. In CP, the Siberian high are weakening, the Hokkaido eastern low are strengthening and the westerlies(U925) over the Korean Peninsula are enlarging. So CP temperature are suppressed in rising trend or shows weak descent.

• Journal of the Korean institute of surface engineering
• /
• v.36 no.1
• /
• pp.27-33
• /
• 2003

Pulsed magnetron sputtering of graphite target was employed for deposition of diamond-like carbon (DLC) films. Time-resolved probe measurements of magnetron discharge plasma have been performed. It was shown that the pulsed magnetron discharge plasma density ($∼10^{17}$ $m^{-3}$ ) is close to that of vacuum arc cathode sputtering of graphite. Raman spectroscopy was sed to examine DLC films produced at low ( $U_{sub}$ / < 1 kV) pulsed bias voltages applied to the substrate. It has been shown that maximum content of diamond-like carbon in the coating (50-60%) is achieved at energy per deposited carbon atom of $E_{c}$ =100 eV. In spite of rather high percentage of $sp^3$-bonded carbon atoms and good scratch-resistance, the films showed poor adhesion because of absence of ion mixing between the film and the substrates. Electric breakdowns occurring during the deposition of the insulating DLC film also thought to decrease its adhesion.

• Journal of the Korean Wood Science and Technology
• /
• v.24 no.4
• /
• pp.1-6
• /
• 1996

Extracts from bark have been studied with a view to producing water-proof wood adhesives. Lately many softwoods, such as radiata pine from New Zealand and larch from Siberia, Russia, have been imported and utilized, and their residual barks would be expecting as potential raw materials for something useful chemicals. The great effort toward utilization of bark extractives as a chemical feedstock has been made on a worldwide level. However few report has been done for the utilization of tree bark extractives in Korea. Hot-water extracts were prepared from barks of Japanese larch(Larix leptolepis). Siberian larch(Larix gmelinii) and Radiata pine(Pinus radiata). The effect of various factors, such as particle size, liquor ratio, extraction temperature, and reaction time, on the extractive yields was discussed. Particle sizes affected the hot-water extractives: the finer the particle size, the higher extractives and extract efficiency. Higher temperature and higher liquor ratio were more effective. Extractives from Japanese larch were relatively less than those from Siberian larch and Radiata pine barks. Formaldehyde precipitates was the highest in extractives of Radiata pine barks. It could be concluded that Siberian larch bark was the best raw material for tannin adhesives, because its extractive yield was higher than those of the other barks.

• Journal of the Korean Wood Science and Technology
• /
• v.25 no.1
• /
• pp.37-41
• /
• 1997

Hot-water soluble extracts were prepared from medium-sized barks of Siberian larch (Larix gmelineii). The extracts were fractionated by ultrafiltration method for producing uniform quality of adhesives. Molecular weight distribution of the extracts was ranged of 100 to 300.000. pH of the extracts affected amounts of flux, and the range of pH 6~pH 8 was proper for wood adhesives, because of easy concentration and fast gelation time. Removal of particles greater than $0.45{\mu}m$ from the extracts increased both filtration speed (flux) and yields of solids in the filtrates. In ultrafiltration process. operating pressure, filtrate temperature, and flow rate significantly increased with the increase of individual condition. Ultrafiltration using PM10 membrane was very effective to fractionate and concentrate the extracts. Removal of large particles greater than 0.45 m from the extracts increased filtration speed(flux) and yields of solids in the filtrates. A gelation time was accelerated with the increasing pH of the extracts and its concentration. The Stiasny precipitate(26%) from the filtrate obtained by PM 10 membrane was very lower than that(78%) of the retentates. This ultrafiltration method was efficient for obtaining high yield purified phenolic compounds.

• Journal of the Mineralogical Society of Korea
• /
• v.30 no.4
• /
• pp.219-227
• /
• 2017

Manganese (Mn) nodules in the Arctic Sea have been founded in the Kara Sea and Barents Sea, but mineral and chemical compositions have been rarely investigated. In this study, mineralogical and geochemical characteristics of Mn nodules obtained during the Arctic Expedition ARA07C in northern East Siberian Sea were identified, and then genesis of Mn nodules were estimated by using these characteristics. Main manganese oxide minerals constituting the manganese nodule were buserite, birnessite, and vernadite. The Mn nodules generally represent radiated and massive texture, and the layered texture was developed restrictively. The radiated texture, main feature of the manganese nodule in the East Siberian Sea, is mainly composed of cuspate-globular microstructure. Compared with the Mn nodules in Pacific and Indian Oceans, Mn nodules of the East Siberian Sea are abundant in Mn, but Fe is too scarce. There was no difference in the chemical composition and microstructures between outer and inner part of nodule. Therefore, nodules are most likely to have only one genesis during their growth, and all of nodules indicate the diagenetic in $Mn-Fe-(Cu+Ni+Co){\times}10$ ternary diagram. It is considered that the manganese nodules in the East Siberian Sea are characterized by high Mn contents because manganese contents in the Arctic Ocean were mainly resulted from river or coastal erosion and most of them are trapped in the Arctic Ocean.