• 한국세라믹학회지
• /
• 제52권4호
• /
• pp.290-293
• /
• 2015

The properties of the IZTO thin films on the glass were studied with a variation of the $SiO_2$ buffer layer thickness. $SiO_2$ buffer layers were deposited by plasma-enhanced chemical vapor deposition (PECVD) on the glass, and the In-Zn-Tin-Oxide (IZTO) thin films were deposited on the buffer layer by RF magnetron sputtering. All the IZTO thin films with the $SiO_2$ buffer layer are shown to be amorphous. Optimum $SiO_2$ buffer layer thickness was obtained through analyzing the structural, morphological, electrical, and optical properties of the IZTO thin films. As a result, the IZTO surface roughness is 0.273 nm with a sheet resistance of $25.32{\Omega}/sq$ and the average transmittance is 82.51% in the visible region, at a $SiO_2$ buffer layer thickness of 40 nm. The result indicates that the uniformity of surface and the properties of the IZTO thin film on the glass were improved by employing the $SiO_2$ buffer layer and the IZTO thin film can be applied well to the transparent conductive oxide for display devices.

• 한국전기전자재료학회논문지
• /
• 제15권10호
• /
• pp.883-888
• /
• 2002

SiC direct bonding technology is very attractive for both SiCOI(SiC-on-insulator) electric devices and SiC-MEMS(micro electro mechanical system) fields because of its application possibility in harsh environments. This paper presents pre-bonding techniques with variation of HF pre-treatment conditions for SiC wafer direct bonding using PECVD(plasma enhanced chemical vapor deposition) oxide. The PECYD oxide was characterized by XPS(X-ray photoelectron spectrometer) and AFM(atomic force microscopy). The characteristics of the bonded sample were measured under different bonding conditions of HF concentration and an applied pressure. The bonding strength was evaluated by the tensile strength method. The bonded interface was analyzed by using SEM(scanning electron microscope). Components existed in the interlayer were analyzed by using FT-IR(fourier transform infrared spectroscopy). The bonding strength was varied with HF pre-treatment conditions before the pre-bonding in the range of 5.3 kgf/cm$^2$to 15.5 kgf/cm$^2$.

• 한국진공학회지
• /
• 제1권3호
• /
• pp.376-381
• /
• 1992

Tungsten silicide films were deposited on the highly phosphorus-doped poly Si/SiO2/Si substrates by Low Pressure Chemical Vapor Deposition. They were heat treated in different conditions. XTEM, SIMS and high frequency C-V analysis were conducted for characterization. It can be concluded that outdiffusion of phosphours impurity throught the silicide films lead to its depletion in the poly-Si gate region near the gate oxide, resulting in loss of capacitance and increase of effective gate oxide thickness.

• 반도체디스플레이기술학회지
• /
• 제2권1호
• /
• pp.21-24
• /
• 2003

Sludged silicon powders that are generated during silicon ingot slicing process have potential usage as silicon source in fabricating silicon carbide powders by adding carbon. A thermodynamic calculation is performed to consider a plausible formation condition for the silicon carbide powders. A thin silicon oxide layer around silicon powder is sufficient to supply equilibrium oxygen partial pressure at the formation temperature($1400^{\circ}C$) of the silicon carbide in the Si-C-O ternary system. Formation of silicon carbide by using the sludged silicon powders is more efficient than by using silicon oxide powders.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -1
• /
• pp.365-368
• /
• 2002

We investigated the influence of RTP annealing of multi-layered metal films deposited on oxides layer. Two types of oxides, BPSG and P-7205, were used as a bottom layer under multi-layered metal film. The bonding was not good in metal/BPSG/Si samples because adhesion between metal layer and BPSG oxide layer was poor by interfacial reaction during RTP annealing above 650$^{\circ}C$. On the other hand bonding was always good in metal/ P-TEOS /Si samples regardless of annealing temperature. We observed the interface between oxide and metal layers using AES and TEM. The phosphorus and oxygen profile in interface between metal and oxide layers were different in metal/BPSG/Si and metal/P-TEOS/Si samples. We have known that the properties of interface was improved in metal/BPSG/Si samples when the sample was annealed below 650$^{\circ}C$.

• 한국전기전자재료학회논문지
• /
• 제31권2호
• /
• pp.85-89
• /
• 2018

In this study, functional transparent conducting layers were investigated for Si-based photoelectric applications. Double transparent conductive oxide (TCO) films were deposited on a Si substrate in the sequence of indium tin oxide (ITO) followed by aluminum-doped zinc oxide (AZO). First, we observed that the conductivity and transparency of AZO dominate the overall performance of the double TCO layers. Secondly, the double layered TCO film (consisting of AZO/ITO) deposited by sputtering was compared to a AZO-only film in terms of their optical and electrical properties. We prepared three different AZO films: ITO:3min/AZO:10min, ITO:5min/AZO:7min, and ITO:7min/AZO:4min. The results show that the optical properties (transmittance, absorbance, and reflection) can be controlled by the film composition. This may provide a significant pathway for the manipulation of the optical and electrical properties of photoelectric devices.

• Transactions on Electrical and Electronic Materials
• /
• 제16권4호
• /
• pp.194-197
• /
• 2015

La_9.33(Si₅V₁)O₂₆ ceramics were fabricated by the mixed oxide method for solid oxide electrolytes. La_9.33(Si₅V₁)O₂₆ specimens showed the hexagonal, space group P63 or P63/m, and the unit cell volume increased when the sintering temperature increased. The specimen sintered at 1,400℃ showed the X-ray patterns of the homogeneous apatite single phase without the second phase, such as La₂SiO₅ and SiO₂. The specimen sintered at 1,400℃ showed the maximum sintered density of 4.93 g/cm³. When the sintering temperature increased, the electrical conductivities increased, the activation energy decreased and the values were 7.83×10⁻⁴ S/cm, 1.61 eV at 600℃, respectively.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2000년도 제18회 학술발표회 논문개요집
• /
• pp.122-122
• /
• 2000

Magnesium oxide is thermodynamically very stable, has a low dielectric constant and a low refractive index, and has been widely used as substrate for growing various thin film materials, particulary oxides of the perovskite structure. There has been a considerable interest in integrating the physical properties of these oxides with semiconductor materials such as GaAs and Si. In this regard, it is considered very important to be able to grow MgO buffer layers epitaxially on the semiconductors. Various oxide films can then be grown on such buffer layers eliminating the need for using MgO single crystal substrates. Vapor phase epitaxy of magnesium oxide has been accomplished on Si(001) substrates in a high vacuum chamber using the single precursor methylmagnesium tert-butoxide in the temperature range 750-80$0^{\circ}C$. For the epitaxy of the MgO films, SiC buffer layers had to be grown on Si(001). The films were characterized by reflection high energy electron diffraction (RHEED) in situ in the growth chamber, and x-ray diffraction (XRD), x-ray pole figure analysis, scanning electron microscopy (SEM), and x-ray photoelectron spectroscopy (XPS) after the growth.

• 전기전자학회논문지
• /
• 제18권4호
• /
• pp.447-455
• /
• 2014

본 연구에서는 4H-SiC MOSFET의 주요 문제점인 $SiC/SiO_2$ 계면의 특성을 향상시키기 위해 PECVD (plasma enhanced chemical vapor deposition) 공정을 이용하여 n-based 4H-SiC MOS Capacitor를 제작하였다. 건식 산화 공정의 낮은 성장속도, 높은 계면포획 밀도와 $SiO_2$의 낮은 항복전계 등의 문제를 극복하기 위하여 PECVD와 NO어닐링 공정을 사용하여 MOS Capacitor를 제작하였다. 제작이 끝난 후, MOS Capacitor의 계면특성을 hi-lo C-V 측정, I-V 측정 및 SIMS를 이용해 측정하고 평가하였다. 계면의 특성을 건식 산화의 경우와 비교한 결과 20% 감소한 평탄대 전압 변화, 25% 감소한 $SiO_2$ 유효 전하 밀도, 8MV/cm의 증가한 $SiO_2$ 항복전계 및 1.57eV의 유효 에너지 장벽 높이, 전도대 아래로 0.375~0.495eV만큼 떨어져 있는 에너지 영역에서 69.05% 감소한 계면 포획 농도를 확인함으로써 향상된 계면 및 산화막 특성을 얻을 수 있었다.

• 대한전자공학회논문지
• /
• 제24권4호
• /
• pp.625-630
• /
• 1987

Thermal evaporated SiO rf sputtered SiO2 thin films were most widely used to the gate oxide of TFTs. In this paper, the difference of trap density and distribution between SiO2 and SiO2 film were studied. TFTs using SiO and SiO2 thin film for the gate oxide were fabricated. The output characteirstics of TFTs and the time dpendencd of the leakage current were measured. Models of the carrier transport and carrier trapping in TFT were proposed. The trap density was obtained by substituting measured value for the equation derived from the proposed model. It was found that rf sputtered SiO2 had more traps at interface than thermal evaporated SiO.