• 자원리싸이클링
• /
• 제24권1호
• /
• pp.35-42
• /
• 2015

본 연구는 건식제련법으로 폐 PCB를 처리하는 공정에서 슬래그 중 Ni의 용해거동에 대한 기초연구로서, CaO-$SiO_2-Al_2O_3$-MgO계 슬래그와 Cu-5 wt%Ni합금 사이의 Ni 분배거동을 1623~1823 K의 $CO_2$-CO 분위기 중에서 조사하였다. 평형산소분압이 증가할수록 Ni의 분배비는 선형적으로 증가하였으며, 이 결과로부터 Ni의 슬래그 중 용해반응은 다음과 같이 나타낼 수 있다. $$Ni(l)_{metal}+\frac{1}{2}O_2(g)NiO(l)_{slag}$$ 슬래그 중 염기성 산화물(CaO와 MgO)의 농도가 증가할수록 Ni의 분배비는 선형적으로 증가하였다. 그러나 반응 온도가 높을수록 Ni의 분배비는 선형적으로 감소하였다. 이러한 결과로부터 Ni의 분배비에 미치는 실험변수의 영향을 다중 회귀분석하여 다음과 같은 경험식을 얻었다. $${\log}L_{Ni}=0.4000{\log}P_{O2}-5.1{\times}10^{-4}T+0.3375\(\frac{X_{CaO}+X_{MgO}}{X_{SiO2}}\)$$

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.179-182
• /
• 2007

The compressive fatigue tests on the closed cell Al-Si-Ca alloy foams with two different thicknesses were performed using a load ratio of 0.1. The quasi-static and cyclic compressive behaviors were obtained respectively. The fatigue stress-life (S-N) curves were evaluated from the obtained cyclic compressive behaviors. S-N curves were presented for the onset of progressive shortening. It turned out that the fatigue strength showed higher value for the thicker foam and the onset of shortening of thinner foam took place earlier. The crushing was found to initiate in a single band which broadens gradually with additional fatigue cycles. Progressive shortening of the specimen took place due to a combination of low cycle fatigue failure and cyclic ratcheting.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1059-1060
• /
• 2006

The creep behavior of Al-5vol.% SiC composite was investigated. The composite powder was produced by mechanical milling and hot extruded at $450^{\circ}C$ at ratio of 16:1. A creep test was carried out at a constant load at 598, 648, and 673 K. Using the steady-state equations, the threshold stress and the stress exponent of the creep as a function of temperature were determined. The stress exponent was found to be 3 at the temperature of 673 K and 8 at 598 and 648 K. The dependency of the threshold stress to temperature obeys the Arrhenius relationship with the energy term of $29\;kJ\;mole^{-1}$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.131-131
• /
• 2008

Silicon carbide (SiC) has attracted significant attention for high frequency, high temperature and high power devices due to its superior properties such as the large band gap, high breakdown electric field, high saturation velocity and high thermal conductivity. We performed Al ion implantation processes on n-type 4H-SiC substrate using a SILVACO ATHENA numerical simulator. The ion implantation model used a Monte-Carlo method. We studied the effect of channeling by Al implantation simulation in both 0 off-axis and 8 off-axis n-type 4H-SiC substrate. We have investigated the Al distribution in 4H-SiC through the variation of the implantation energies and the corresponding ratio of the doses. The implantation energies controlled 40, 60, 80, 100 and 120 keV and the implantation doses varied from $2\times10^{14}$ to $1\times10^{15}cm^{-2}$. In the simulation results, the Al ion distribution was deeper as increasing implantation energy and the doping level increased as increasing implantation doses. After the post-implantation annealing, the electrical properties of Al-implanted p-n junction diode were investigated by SILV ACO ATLAS numerical simulator.

• 한국토양비료학회지
• /
• 제46권2호
• /
• pp.87-91
• /
• 2013

The crystal structure of partially dehydrated fully $Zn^{2+}$-exchanged zeolite Y was determined by X-ray diffraction techniques in the cubic space group $Fd\bar{3}m$ at 294(1) K and refined to the final error indices $R_1/wR_2$ = 0.035/0.119 for $|Zn_{35.5}(H_2O)_{13}|[Si_{121}Al_{71}O_{384}]$-FAU. About 35.5 $Zn^{2+}$ ions per unit cell are found at six distinct positions; sites I, I', a second I', II', II, and a second II. In sodalite cavities, the 11 water molecules coordinate to Zn(I'b) and/or Zn(II') ions; each of two $H_2O$ bonds to a Zn(IIb) in supercages. Two different $Zn^{2+}$ positions near 6-oxygen ring are due to their Si-Al ordering in tetrahedral site by Si/Al ratio leading to the different kinds of 6-rings.

• 한국분말재료학회지
• /
• 제28권2호
• /
• pp.120-126
• /
• 2021

In this study, AlSi10Mg alloy powders are synthesized using gas atomization and sieving processes for powder bed fusion (PBF) additive manufacturing. The effect of nozzle diameter (ø = 4.0, 4.5, 5.0 and 8.0 mm) on the gas atomization and sieving size on the properties of the prepared powder are investigated. As the nozzle diameter decreases, the size of the manufactured powder decreases, and the uniformity of the particle size distribution improves. Therefore, the ø 4.0 mm nozzle diameter yields powder with superior properties. Spherically shaped powders can be prepared at a scale suitable for the PBF process with a particle size distribution of 10-45 ㎛. The Hausner ratio value of the powder is measured to be 1.24. In addition, the yield fraction of the powder prepared in this study is 26.6%, which is higher than the previously reported value of 10-15%. These results indicate that the nozzle diameter and the post-sieve process simultaneously influence the shape of the prepared powder as well as the satellite powder on its surface.

• 센서학회지
• /
• 제7권5호
• /
• pp.372-376
• /
• 1998

기능성 소자 응용을 위한 다양한 박막을 성장시키기 위하여 PLD(Pulsed Laser Deposition) 장치를 제작 개발하였다. 이 PLD 장치를 이용하여 $NbS_2$ 박막을 $Al_2O_3$(012) 기판과 Si(111) 기판 위에 성장시켰다. 결정성 박막의 성장조건을 조사하기 위하여 기판온도를 실온${\sim}600^{\circ}C$, 타겟의 성분비(S/Nb)를 $2.0{\sim}5.25$로 변화시켰다. XRD 패턴으로부터 기판온도가 $600^{\circ}C$이고 타겟의 성분비가 4.0일 때 c-축 배향을 나타내는 양호한 결정성의 $NbS_2$박막이 성장되었다. Si(111) 기판 위보다 $Al_2O_3$(012) 기판 위에서 보다 양질의 $NbS_2$ 박막이 성장되었음을 알 수 있었다.

• 한국주조공학회지
• /
• 제13권6호
• /
• pp.547-554
• /
• 1993

Aluminum alloy matrix composites reinforced with various amounts of $Al_2O_3$ short fibers have been produced by rheo-compocasting accompanied by hot pressing. When composites reinforced with fibers are produced by rheo-compocasting, S-L process is the most effective method for homogeneous dispersion of fibers. A sound composites with the improved orientation(3 dimension${\rightarrow}$2 dimension) of the fibers and increased volume fraction of them have been fabricated through the hot pressing of the casted composites. Fibers are broken down when rheo-compocasting, hot pressing, and $T_6$ treating. Among them fibers are broken down most heavily in the hot pressing. And even in the case of the composite reinforced with 30 vol% fibers, which showed the hardest fiber break down, aspect ratio(11.6) is higher than critical aspect ratio(10.7). The fiber strengthening effect in the composites has showed upto 573K. As the test temperature increases to the range of 573K, the effect has been higher. The fracture of composites is controlled by fiber from room temperature to 473K, but the fracture of composites is controlled by interface between fiber and matrix alloy above 473K.

• 한국광물학회지
• /
• 제22권4호
• /
• pp.307-312
• /
• 2009

제주도의 화산쇄설성 퇴적암인 신양리층에서 산출되는 motukoreaite와 quintinite-3T를 보고한다. 두 광물은 Mg-Al 층상복수산화물로서 현무암 유리질 입자 사이를 충전하는 극미립판상 입자들의 구상 또는 포도상 집합체로 산출된다. Quintinite-3T의 집합체 외각에 motukoreaite의 판상 입자들이 과성장하여 피복하였다. 두 광물의 X선회절자료와 화학조성은 대체로 문헌에 보고된 값들과 유사하지만, motukoreaite의 Mg/Al 비는 보고된 값보다 조금 크다. 전자현미화학 분석 값으로부터 구한 motukoreaite와 quintinite-3T의 구조식은 각각 $Na_{1.6}Ca_{0.1}Mg_{40.7}Al_{20.7}Si_{0.9}(CO_3)_{13.6}(SO_4)_{7.4}(OH)_{108}56H_2O$와 $Mg_{3.7}Al_{1.9}Si_{0.2}(OH)_{12}(CO_3)_{0.8}(SO_4)_{0.2}3H_2O$이다. 두 광물은 얕은 바다에 퇴적된 현무암 유리질 입자들이 해수와 반응하여 생성 되었으며, 해저 환경에서 화산쇄설성 퇴적물의 교결 및 고화작용에 기여하였다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 추계학술발표대회 논문집
• /
• pp.127-130
• /
• 2002

The 2.5 vol% TiNi/6061Al composites were fabricated by permanent mold casting, and its microstructures and tensile test for the cold rolled composites with maximum 50% reduction ratio were investigated. In the case of TiNi fiber with 2mm interval in preform, the interface bonding of fabricated composites were good. EPMA analysis results were found the small amount of Mg, Si segregated interface of diffusion layer. Transverse section of TiNi fiber was decreased with increasing reduction ratio and 40% reduction ratio was observed microcrack from TiNi fiber. And the tensile strength of composites at 38% reduction ratio was 194MPa. In the case of over 38% reduction ratio, the decrease of the tensile strength was due to TiNi fiber rupture by excess working. The fracture mode was appeared brittle fracture with increasing reduction ratio