Resources Recycling (자원리싸이클링)

The Korean Institute of Resources Recycling (한국자원리싸이클링학회)
권호 표지
DOI QR코드

DOI QR Code

Distribution Behavior of Ni between CaO-SiO2-Al2O3-MgO Slag and Cu-Ni Alloy

CaO-SiO2-Al2O3-MgO 슬래그와 Cu-Ni합금 사이의 Ni 분배거동

  • Received : 2014.12.31
  • Accepted : 2015.02.06
  • Published : 2015.02.28
Download PDF
⟨ Previous Next ⟩

Abstract

To obtain the fundamental information on the dissolution of nickel into the slag in the pyrometallurgical processes for treatment of wasted PCB, the distribution ratios of nickel between CaO-$SiO_2-Al_2O_3$-MgO slag and copper-5 wt%Ni alloy were measured at 1623 K to 1823 K under a controlled $CO_2$-CO atmosphere. The distribution ratio of Ni increased linearly with increasing oxygen partial pressure. Therefore, the dissolution reaction of nickel into the slags could be described by the following equation; $$Ni(l)_{metal}+\frac{1}{2}O_2(g)NiO(l)_{slag}$$ The distribution ratio of Ni increased linearly with increasing content of basic oxides(CaO and MgO) in slag. However, the distribution ratio of Ni decreased linearly with increasing temperature. From these results, the empirical equation of distribution ratio of Ni was obtained by the following equation from the analysis of experimental conditions by multiple regression. $${\log}L_{Ni}=0.4000{\log}P_{O2}-5.1{\times}10^{-4}T+0.3375\(\frac{X_{CaO}+X_{MgO}}{X_{SiO2}}\)$$

본 연구는 건식제련법으로 폐 PCB를 처리하는 공정에서 슬래그 중 Ni의 용해거동에 대한 기초연구로서, CaO-$SiO_2-Al_2O_3$-MgO계 슬래그와 Cu-5 wt%Ni합금 사이의 Ni 분배거동을 1623~1823 K의 $CO_2$-CO 분위기 중에서 조사하였다. 평형산소분압이 증가할수록 Ni의 분배비는 선형적으로 증가하였으며, 이 결과로부터 Ni의 슬래그 중 용해반응은 다음과 같이 나타낼 수 있다. $$Ni(l)_{metal}+\frac{1}{2}O_2(g)NiO(l)_{slag}$$ 슬래그 중 염기성 산화물(CaO와 MgO)의 농도가 증가할수록 Ni의 분배비는 선형적으로 증가하였다. 그러나 반응 온도가 높을수록 Ni의 분배비는 선형적으로 감소하였다. 이러한 결과로부터 Ni의 분배비에 미치는 실험변수의 영향을 다중 회귀분석하여 다음과 같은 경험식을 얻었다. $${\log}L_{Ni}=0.4000{\log}P_{O2}-5.1{\times}10^{-4}T+0.3375\(\frac{X_{CaO}+X_{MgO}}{X_{SiO2}}\)$$

Keywords

References

  1. Kim, Byung-Su, Lee, Jae-chun, and Jeong, Jin-ki, 2009: Current Status on the Pyrometallurgical Process for Recovering Precious and Valuable Metals from Waste Electrical and Electronic Equipment(WEEE) Scrap, J. of Korean Inst. of Resources Recycling, 18(4), pp. 14-23.
  2. Yoo, Jae-Min, et al., 2007; Recovery of Metal Concentrates from Waste Printed Circuit Boards by Mechanical Separation Processes, J. of Kor. Solid Wastes Engineering Soc. 24, pp. 523-531.
  3. Ahn, Jae-Woo, et al., 2005; Biological Leaching of Cu, Al, Zn, Ni, Co, Sn and Pb from Waste Electronic Scrap using Thiobacillus Ferrooxidans, J. of Korean Inst. of Resources Recycling, 14(1), pp. 17-25.
  4. Ahn, Jae-Woo and Seo, Jae-Seong, 2009; Nitric acid leaching of electronic scraps and the removal of free nitric acid from the leaching solution for the recovery of copper and tin, J. of Korean Inst. of Resources Recycling, 18(5), pp. 44-51.
  5. Kwon, Eui-Hyuk, et al., 2005; Melting of PCB scrap for the Extraction of Metallic Components, Kor. J. of Materials Research, 15(1), pp. 31-36. https://doi.org/10.3740/MRSK.2005.15.1.031
  6. Kim, Byung-Su, Lee, Jae-Chun, and Lee, Kwang-Ho, 2007; A Novel Process for Extraction Valuable Metals from Waste Electric and Electronic Scrap Using Waste Copper Slag by a High Temperature Melting Method, J. of Korean Inst. of Resources Recycling, 16(3), pp. 27-33.
  7. Shin, Dong-Yeop, et al., 2008; Pyro-metallurgical Treatment of used OA Parts for the Recovery of Valuable Metals, J. of Korean Inst. of Resources Recycling, 17(2), pp. 46-54.
  8. Park, Joo Hyun, 2011; Recovery of Au, Ag, and Ni from PCB Wastes by $CaF_2$-containing Slag, J. of Korean Inst. of Resources Recycling, 20(4), pp. 58-64. https://doi.org/10.7844/kirr.2011.20.4.058
  9. Park, Jin Suk, Park, Kyung Ho and Min, Dong Joon, 2003: A Study on the Distribution Behavior of Nickel in $CaOFe_tO-SiO_2-MgO$ Slag System, J. Kor. Inst. Met. & Mater. 41(4), pp. 260-266.
  10. Lee, Sang Hoon et al., 2002: Thermodynamic Behavior of Nickel in $CaO-SiO_2-Fe_tO$ Slag, Metall. & Mater. Trans. B, 33B, pp. 55-59.
  11. Han, Bo-Ram, Kim, Eung-Jin and Sohn, Ho-Sang, 2014: Copper Solubility in $Al_2O_3-CaO-SiO_2-MgO$ Slag, J. of Korean Inst. of Resources Recycling, 23(1), pp. 1-7.
  12. Banya, S., 2002: "Ferrous Process Metallurgy", The Japan Inst. of Metals, p.239, Maruzen, Sendai, Japan.
  13. Matsuzaki, K. et al., 2000: Distribution Equilibria of Pb and Cu between $CaO-SiO_2-Al_2O_3$ Melts and Liquid Copper, Metall. Trans. B, 31B, pp. 1261-1266.
  14. Takeda, Y., Kanesaka, S., and Yazawa, A., 1986: Equilibria between $FeO_x-CaO-SiO_2$ slag and liquid Cu-Ni-Fe alloy, Proc. of CIM 25th. Ann. Conf. of Metallurgists 1986, Aug. 17-20, 1986, CIM, Toronto, pp. 185-202.
  15. Pagador, R.U., Hino, M., and Itagaki, K., 1996: Dissolution of Nickel and Copper in MgO saturated $FeO_XMgO-SiO_2$ Slag Equilibrated with Molten Ni-Cu-Fe Alloy, Sigen-to Sozai 112, pp. 959-964. https://doi.org/10.2473/shigentosozai.112.959

Cited by

  1. Fe2O3 첨가에 의한 폐PCB로부터 긁어낸 Cu분말의 용융 및 정제 vol.26, pp.4, 2017, https://doi.org/10.7844/kirr.2017.26.4.95
  2. 인쇄회로기판 제조공정 중 발생한 슬러지 내 건식환원 처리를 통한 구리 회수를 위한 슬러지 분석 및 열역학적 계산 vol.26, pp.5, 2015, https://doi.org/10.7844/kirr.2017.26.5.85