• Nuclear Engineering and Technology
• /
• 제35권6호
• /
• pp.537-546
• /
• 2003

The purpose of this paper is to investigate the buckling characteristics of a conceptually designed KALIMER-150(Korea Advanced LIquid MEtal Reactor, 150MWe) reactor vessel and verify the buckling behavior using the reduced scale cylindrical shell structures. To do this, nonlinear buckling analyses using finite element method and evaluation formulae are carried out. From the results, the KALIMER-150 reactor vessel exhibits a dominant bending buckling mode and is significantly affected by the plastic behavior. The interaction effects with the vertical seismic load cause the lateral buckling load to be slightly decrease. From the results of the buckling experiments using reduced scaled cylindrical shell structures, it is verified that the buckling modes such as pure bending, pure shear, and mixed(bending plus shear) mode clearly appear under a lateral load corresponding to the slenderness ratio of cylinder.

• Journal of Mechanical Science and Technology
• /
• 제17권12호
• /
• pp.1949-1960
• /
• 2003

This paper presents vibration and noise control of flexible structures using squeeze mode electro-rheological mounts. After verifying that the damping force of the ER mount can be controlled by the intensity of the electric fild, two different types of ER squeeze mounts have been devised. Firstly, a small size ER mount to support 3 kg is manufactured and applied to the frame structure to control the vibration. An optimal controller which consists of the velocity and the transmitted force feedback signals is designed and implemented to attenuate both the vibration and the transmitted forces. Secondly, a large size of ER mount to support 200 kg is devised and applied to the shell structure to reduce the radiated noise. Dynamic modeling and controller design are undertaken in order to evaluate noise control performance as well as isolation performance of the transmitted force. The radiated noise from the cylindrical shell is calculated by SYSNOISE using forces which are transmitted to the cylindrical shell through two-stage mounting system.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.498-504
• /
• 2002

Vibration beat phenomenon is theoretically investigated on a slightly asymmetric cylindrical shell, which is a simplified model of Korean bell. Mode pairs of the slightly asymmetric shell are obtained by receptance analysis and impulse response of the shell is derived using modal expansion and Laplace transform. Based on the impulse response model, beat mapping method is proposed to explain the reason that the beat of a bell vibration shows periodic distribution on the circumference. Beat characteristics of King Song-Dok Bell are explained in detail using the beat map and the measured modal data.

• Structural Engineering and Mechanics
• /
• 제37권2호
• /
• pp.253-256
• /
• 2011

• Architectural research
• /
• 제18권2호
• /
• pp.65-74
• /
• 2016

Free vibration analysis of plates and shells is carried out by using isogeometric approach. For this purpose, an isogeometric shell element based on Reissner-Mindlin (RM) shell theory is developed. Non-uniform rational B-spline surface (NURBS) definition is introduced to represent the geometry of shell and it is also used to derive all terms required in the isogeometric element formulation. New anchor positions are proposed to calculate the shell normal vector. Gauss integration rule is used for the formation of stiffness and mass matrices. The proposed shell element is then used to examine vibrational behaviours of plate and shell structures. From numerical results, it is found to be that reliable natural frequencies and associated mode shapes can be predicted by the present isogeometric RM shell element.

• The Journal of the Acoustical Society of Korea
• /
• 제21권4E호
• /
• pp.183-188
• /
• 2002

In this paper, the strong in-plane vibration has been experimentally observed at the end of a finite cylindrical shell. The strong in-plane vibration was generated by the evanescent wave field, which was excited along about half the length of the shell. The evanescent waves were generated due to mode conversion of elastic waves at the ends of the cylindrical shells. The results show that the strong in-plane end vibration can be generated in cylindrical shells.

• Structural Engineering and Mechanics
• /
• 제68권1호
• /
• pp.17-38
• /
• 2018

In this paper, we compare and assess the performance of the standard 3- and 6-node MITC shell elements (Lee and Bathe 2004) with the recently developed MITC triangular elements (Lee et al. 2014, Jeon et al. 2014, Jun et al. 2018) which were based on the partitions of unity approximation, bubble node, or both. The convergence behavior of the shell elements are measured in well-known benchmark tests; four plane stress tests (mesh distortion test, cantilever beam, Cook's skew beam, and MacNeal beam), two plate tests (Morley's skew plate and circular plate), and six shell tests (curved beam, twisted beam, pinched cylinder, hemispherical shells with or without hole, and Scordelis-Lo roof). To precisely compare and evaluate the solution accuracy of the shell elements, different triangular mesh patterns and distorted element mesh are adopted in the benchmark problems. All shell finite elements considered pass the basic tests; namely, the isotropy, the patch, and the zero energy mode tests.

• Architectural research
• /
• 제16권2호
• /
• pp.67-74
• /
• 2014

Free vibration analysis of thin shells is carried out by using isogeometric approach. For this purpose, a thin shell element based on Kirchhoff-Love shell theory is developed. Non-uniform rational B-spline surface (NURBS) definition is introduced to represent the geometry of shell and also used to derive all terms required in the isogeometric element formulation. Gauss integration rule is used for stiffness and mass matrices. The present shell element is then applied to examine vibrational behaviours of thin plate and shell structures. From numerical results, it is found be that reliable natural frequencies and associated mode shapes of thin shell structures can be predicted by the present isogeometric shell element.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.160-165
• /
• 2008

Fluid loading of a vibrating cylindrical shell can change natural frequencies and vibration magnitudes of the shell and a vibrating cylindrical shell can also change acoustic pressure of fluid. The vibroacoustics of fluid-filled cylindrical shells need the coupled solution of Helmholtz equation and governing equation of a cylindrical shell with boundary conditions. This paper proposed the wall impedance of fluid-filled axisymmetric cylindrical shells, focusing on the inner fluid/shell interaction. To propose the impedance, shell displacements used the linear combination of in vacuo shell modes. Acoustic pressure prediction of fluid used Kirchchoff-Helmholtz Integral equation with Green function of the plane mode. For the demonstration of the proposed results, numerical applications on mufflers were conducted.

• International Journal of Ocean System Engineering
• /
• 제1권1호
• /
• pp.1-8
• /
• 2011

Ocean structures and vehicles are exposed to severe ocean environment conditions such as waves, winds and currents. When such ocean structures and vehicles are designed, an accurate structure analysis is required to keep the system safely. Hydro-elastic analysis is one of key issues to design such structures and vehicles. In many previous investigations, numerical analyses for hydro-elastic problem have been used. In this study, an experimental analysis is carried out and the circular cylindrical shell is considered. Dynamical characteristics for a circular cylindrical shell are identified by experimental vibration analysis in air and water. The natural frequencies and mode shapes are compared in air and water to obtain hydro-elastic effects. Some interesting results are found in the variation of natural frequencies and damping ratios of the circular cylindrical shell for different water contact depths.