• Journal of Radiation Protection and Research
• /
• v.40 no.4
• /
• pp.223-230
• /
• 2015

The objective of this study is to identify the radionuclide distribution in public water by carrying out the analysis of artificial radionuclides($^{134}Cs$, $^{137}Cs$, $^{239+240}Pu$), natural radionuclide($^{210}Pb$) and TOC in the lake Euiam sediment in Chuncheon, South Korea. The $^{134}Cs$ concentration in all lake sediments showed below MDA values, and the $^{137}Cs$ concentration in lake sediment were ranged from MDA to $8.79Bq{\cdot}kg^{-1}-dry$. The $^{137}Cs$ concentrations in surface sediment were reported to be 2.4 to $4.2Bq{\cdot}kg^{-1}-dry$. The lowest concentration of $^{137}Cs$ was reported at St. 4 and the highest concentration was reported at St. 3, respectively. The $^{239+240}Pu$ concentration in lake sediment were ranged from 0.049 to $0.47Bq{\cdot}kg^{-1}-dry$. The lowest concentration was reported at St. 2 and the highest concentration was reported at St. 3. The correlation(r) between the $^{239+240}Pu$ concentration and $^{137}Cs$ concentration in lake sediment presented higher values (0.54 to 0.97) and this suggests the behavior and origin of $^{137}Cs$ is identical to the $^{239+240}Pu$ in the sediment. The $^{134}Cs$ concentration below MDA value and the $^{239+240}Pu/^{137}Cs$ ratio(mean value of 0.041) indicated that the artificial radionuclides in the sediment were originated from global fallout by the atmospheric testing of nuclear weapons conducted by former USSR and U.S.A, but not from the Fukushima Daiichi NPP accident. The sedimentation rate derived from $^{210}Pb$ age-dating method at St. 2 is calculated to be $0.31{\pm}0.06cm{\cdot}y^{-1}$. This value is similar to the value ($0.41{\pm}0.05cm{\cdot}y^{-1}$) estimated from the $^{137}Cs$ maximum peak produced from early 1960's. The content of TOC in lake Euiam sediments varied from 0.20 to 13.01%. While the highest correlation between TOC and $^{137}Cs$ concentration in the sediment were found at St. 1, the others presented the low correlation.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.21 no.4
• /
• pp.360-365
• /
• 1999

This study was aimed to suggest to better treatment method of jaw cyst that the maximum diameter was wider than 3cm, using different treatment and clinical and radiographic result. We divided the 60 patients into three groups, group A(20 patients) were treated with cyst enucleation and Decalcified Freeze-Dried Allogeneic Bone(DFDB) graft, group B(20 patients) were treated with cyst enucleation and autogenous bone graft, group C(20 patients) were treated with only cyst enucleation. Each group was evaluated with panoramic radiograph and clinical sign & symptom at pre-op and post-op(immediate, 6, 12, 24, 36 month). Bone density was evaluated with disital densitometer. The result was as follows : 1. Post-Op infection was higher in group C(4 pts.) than in group A(1 pt.) and B(1 pt.) 2. Post-Op gingival recession was higher in group C(3 Pts.) than in group A(1 pt.) and B(1 pt.) 3. Anatomic distortion was higher in group C(3 Pt.) than in group A(1 Pt.), and B(1 pt.) 4. Reoperation was done in two patients who were in group C 5. There were donor site morbidity in two patients 6. There was no significant difference between group A and B in their bony density in their follow up period(p>0.05). 7. There were significant differences between group A, B and group C in their bony density until post-op 24 months but a little differences at post-op 36 months(P<0.01)

• Food Science and Preservation
• /
• v.18 no.4
• /
• pp.442-458
• /
• 2011

Among Cucubitaceae, melon (Cucumis melo) is one of the most diversified fruits, with various forms, sizes, pulps, and peel colors, In addition, it is a commercially important crop because of its high sweetness, deep flavor, and abundant juice. In the species, there are both climacteric and non-climacteric melons depending on the respiration and ethylene production patterns after harvest. Ethylene is also considered a crucial hormone for determining sex expression, Phytohormones other than ethylene interact and regulate ripening, There are some indices that can be used to evaluate the optimum harvest maturity. The harvest time can be estimated after the pollination time, which is the most commonly used method of determining the harvest maturity of the fruit. Besides the physiological aspects, the biochemical alterations, including those of sweetness, firmness, flavor, color, and rind, contribute to the overall fruit quality. These changes can be categorized based on the ethylene-dependent and ethylene-independent phenomena due to the ethylene-suppressed transgenic melon. After harvest, the fruits are precooled to $10^{\circ}C$ to reduce the field heat, after which they are sized and packed. The fruits can be treated with hot water ($60^{\circ}C$ for 60 min) to prevent the softening of the enzyme activity and microorganisms, and with calcium to maintain their firmness. 1-methylenecyclopropene (1-MCP) treatment also maintains their storability by inhibiting respiration and ethylene production. The shelf life of melon is very short even under cold storage, like other cucurbits, and it is prone to obtaining chilling injury under $10^{\circ}C$. In South Korea, low-temperature ($10^{\circ}C$) storage is known to be the best storage condition for the fruit. For long-time transport, CA storage is a good method of maintaining the quality of the fruit by reducing the respiration and ethylene. For fresh-cut processing, washing with a sanitizing agent and packing with plastic-film processing are needed, and low-temperature storage is necessary. The consumer need and demand for fresh-cut melon are growing, but preserving the quality of fresh-cut melon is more challenging than preserving the quality of the whole fruit.

• Tuberculosis and Respiratory Diseases
• /
• v.52 no.1
• /
• pp.37-45
• /
• 2002

Background: Diffuse panbronchiolitis(DPB) is a chronic inflammatory lung disease that presents as coughing, copious sputum, exertional dyspnea, which progresses to bronchiectasis. The pathogenesis of bronchiectasis is controlled by inflammatory mediators, which are closely related to mucus hypersecretion, goblet cell dysplasia. In recent studies, the epidermal growth factor receptor(EGFR) system was reported to be associated with this process. It was hypothesized that a relationship exists between goblet cell dysplasia, EGFR expression, and inflammatory mediators produced by neutrophil. Method: Alcian blue/periodic acid -Schiff(AB/PAS) stain, MUC5AC, EGFR, CD16 immunohistochemical stain were examined to investigate a role for the EGFR system in a mucus hypersecretion in DPB using the lung biopsy specimens from 13 DPB patients and 6 controls. Results : In the DPB group, the AB/PAS and MUC5AC -stained areas were $8.31{\pm}3.36%$, $11.46{\pm}4.68%$, respectively. In the control group, the AB/PAS- and MUC5AC-stained areas were $50.5{\pm}5.77%$, $53.3%{\pm}6.67%$, which was significantly larger than in the DPB group (each comparison, p<0.05). The percentage of EGFR expression was $9.54{\pm}4.95%$ in the DPB group, but zero in of the control group. The extent of neutrophilic infiltration was $71.92{\pm}3.71$/5HPF in the DPB group and $45.0{\pm}5.73$/5HPF in the control group, which was statistically significant(p=0.002). Conclusion: The EGFR system is highly related to goblet cell dysplasia, mucus hypersecretion and neutrophilic inflammation in DPB.

• Tuberculosis and Respiratory Diseases
• /
• v.61 no.5
• /
• pp.447-455
• /
• 2006

Background: MMPs and TIMPs are important factors for abnormal remodeling the pulmonary parenchyme in idiopathic interstitial pneumonia(IIP) This study evaluated the expression of MMPs and TIMPs in the tissue of IPF, NSIP and normal control subjects. Method: The MMP-2 and -9 activity in the lung tissue was studied by gelatin zymography, and the expression of MMP-1, -2, -9, TIMP-1 and -2 in the lung tissue was measured by immunohistochemistry. Thirty five patients, who were diagnosed with IIP (UIP ; 22, NSIP ; 13), were enrolled in the immunohistochemical study. Thirteen patients with IIP (UIP ; 9, NSIP ; 4) and five patients with lung cancer were enrolled in the zymographic assay. Results: (1) The immunohistochemistry for MMP-1,-2,-9, TIMP-1 and-2 ; MMP-1,-9 and TIMP-2 were stained stronger in the UIP subjects than NSIP and the normal control. TIMP-2 was strongly stained in the UIP tissue. particularly the fibroblasts in the fibroblastic foci. (2) Zymography for MMP-2 and MMP-9 revealed MMP-2 to have prominent expression in the UIP tissue than in the NSIP tissue. Conclusions: These results suggest that the overexpression of the TIMPs and gelatinases in UIP might be important factors in the irreversible fibrosis of the lung parenchyme.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.24 no.4
• /
• pp.325-335
• /
• 2008

The junction between resilient denture liner and the denture base is difficult to finish and polish due to difference of the physical property of the materials. Gaps tend to be formed during finishing and polishing procedures. The purpose of this study was measuring the width of junctional gap between $Molloplast-B^{(R)}$ and denture base material after finishing and polishing procedure, and evaluating the effect of method and direction on gap width. $Molloplast-B^{(R)}$ was processed (according to the manufacturer's instruction) against Lucitone $199^{(R)}$ acrylic resin. 50 specimens were fabricated with a raised center section. All of specimens were examined and photographed with a stereoscopic microscope(x120), and the largest gap along the junction of $Molloplast-B^{(R)}$ and acrylic resin on each specimen was measured. One-way analysis of variance(ANOVA) and independent t-test at 95% confidence level were used to analyze the data and to compare groups. The results of this study were as follows. In comparison with finishing tools, the gap width was the largest in $Molloplast^{(R)}$-Cutter and the smallest in FSQ-cross cut bur. There was statistically significant difference between FSQ-cross cut bur and $Molloplast^{(R)}$-Cutter(p<0.05). There was no significant difference in gap width between the direction of polishing. The mean value of gap width was the smallest in case of no polishing, and the largest in case of polishing with pumice & tin oxide. There was statistically significant difference between pumice and pumice & tin oxide. From the results, it is concluded that the use of $Molloplast^{(R)}$-Cutter in clinic need serious consideration even though it has good cutting ability. Further careful study is needed for finishing and polishing methods for decreasing gap width in junction of two materials.

• Geophysics and Geophysical Exploration
• /
• v.5 no.4
• /
• pp.223-235
• /
• 2002

Since weak Bones or geological lineaments are likely to be eroded, there may develop weak Bones beneath rivers, and a careful evaluation of ground condition is important to construct structures passing through a river. DC resistivity method, however, has seldomly applied to the investigation of water-covered area, possibly because of difficulties in data aquisition and interpretation. The data aquisition having high quality may be the most important factor, and is more difficult than that in land survey, due to the water layer overlying the underground structure to be imaged. Through the numerical modeling and the analysis of a case history, we studied the method of resistivity survey at the water-covered area, starting from the characteristics of measured data, via data acquisition method, to the interpretation method. We unfolded our discussion according to the installed locations of electrodes, ie., floating them on the water surface, and installing them at the water bottom, because the methods of data acquisition and interpretation vary depending on the electrode location. Through this study, we could confirm that the DC resistivity method can provide fairly reasonable subsurface images. It was also shown that installing electrodes at the water bottom can give the subsurface image with much higher resolution than floating them on the water surface. Since the data acquired at the water-covered area have much lower sensitivity to the underground structure than those at the land, and can be contaminated by the higher noise, such as streaming potential, it would be very important to select the acquisition method and electrode array being able to provide the higher signal-to-noise ratio (S/N ratio) data as well as the high resolving power. Some of the modified electrode arrays can provide the data having reasonably high S/N ratio and need not to install remote electrode(s), and thus, they may be suitable to the resistivity survey at the water-covered area.

• Food Science and Preservation
• /
• v.16 no.5
• /
• pp.629-635
• /
• 2009

We investigated the prolongation of freshness and quality during storage of muskmelons harvested at different times and treated with 1-MCP. The weight loss rate increased in all samples as the storage period was extended, although the weight loss of 1-MCP-treated samples was lower than that of controls, regardless of the degree of maturation. Additionally, the hardness of 1-MCP-treated samples was higher than that of controls, again independent of maturation stage. Specifically, 1-MCP treatment delayed softening of muskmelons, as 1-MCP- treated samples showed a high hardness value after 22 days of storage, whereas hardness of control samples decreased rapidly after 10 days. The soluble solid level in muskmelons harvested 92 days after planting was $14.3^{\circ}$ Brix, whereas that of fruit harvested after 90 days was $12.7^{\circ}$ Brix. There was no significant difference in the acidity of 1-MCP-treated samples and controls after 7 days of storage, although the acidity of 1-MCP-treated fruit was greater than that of controls after 13 days, regardless of the degree of maturation. The L-values (lightness) of 1-MCP treated samples were higher than those of controls for the first 10 days of storage, but the reverse was true after 13 days of storage. The b-values (yellowness) were high in control fruits during the initial period of storage, but greater in 1-MCP treated samples after 19 days of storage. The respiration rate of 1-MCP treated samples was lower than that of controls, regardless of the degree of maturation. Sensory evaluation revealed that the texture of control fruit decreased as storage time rose, whereas that of 1-MCP-treated samples did not fall until 28 or 34 days of storage (p<0.05). Overall acceptability based on a marketable score of 5 points showed that 1-MCP-treated muskmelons scored higher than controls, and remained fresher on storage.

• Nuclear Medicine and Molecular Imaging
• /
• v.41 no.6
• /
• pp.546-552
• /
• 2007

Purpose: In the breast cancer patient, lymphatic mapping and sentinel lymph node biopsy are the most important procedure for axillary lymph node staging. We aimed to compare the three radiocolloids [$^{99m}Tc$-antimony trisulfide colloid (ASC), $^{99m}Tc$-tin colloid (TC), and $^{99m}Tc$-human serum albumin (HSA)] for sentinel lymph node mapping. Subjects and Methods: Totally, 397 patients with clinically N0 stage were enrolled. $^{99m}Tc$-ASC was injected in 202 out of 397 patients, $^{99m}Tc$-TC was injected in 120 patients, and $^{99m}Tc$-HSA was injected in the remaining 75 patients. The sentinel lymph nodes were localized by lymphoscintigraphy and selected using intraoperative gamma probe. All sentinel lymph nodes were investigated by intraoperative pathologic consultation. The axillary lymph nodes which were harvested by the lymph node dissection were also investigated. Results: The patients of each group showed similar clinical characteristics. There were no significant differences (p>0.05) in the identification rate of sentinel lymph nodes (IR), false negative rate (FNR), and negative predictive value (NPV). The axillary lymphadenectomy revealed axillary lymph node metastases in those three groups (ASC-33.2%, TC-31.7%, HSA-22.7%). The IR, FNR, and NPV were not significantly different among those groups. Conclusion: Those three $^{99m}Tc$-labeled radiocolloids showed equivalent results in sentinel lymph node mapping of breast cancer.

• Journal of Science Education
• /
• v.33 no.1
• /
• pp.12-30
• /
• 2009

The purpose of this study was to analyze recognition characteristics of science gifted students on the earth system based on their thinking style. The subjects were 24 science gifted students at the Science Institute for Gifted Students of a university located in metropolitan city in Korea. The students' thinking styles were firstly examined on the basis of the Sternberg's theory of mental self-government. And then, the students were divided into two groups: Type I group(legislative, judicial, global, liberal) and Type II group(executive, local, conservative) based on Sternberg's theory. Data was collected from three different type of questionnaires(A, B, C types), interview, word association method, drawing analyses, concept map, hidden dimension inventory, and in-depth interviews. The findings of analysis indicated that their thinking styles were characterized by 'Legislative', 'Executive', 'Anarchic', 'Global', 'External', 'Liberal' styles. Their preference were conducting new projects and using creative problem solving processes. The results of students' recognition characteristics on earth system were as follows: First, though the two groups' quantitative value on 'System Understanding' was very similar, there were considerable distinctions in details. Second, 'Understanding the Relationship in the System' was closely connected to thinking styles. Type I group was more advantageous with multiple, dynamic, and recursive approach. Third, in the relation to 'System Generalization' both of the groups had similar simple interpretational ability of the system, but Type I group was better on generalization when 'hidden dimension inventory' factor was added. On the system prediction factor, however, students' ability was weak regardless of the type. Consequently, more specific development strategies on various objects are needed for the development and application of the system learning program. Furthermore, it is expected that this study could be practically and effectively used on various fields related to system recognition.