• Journal of Science Education
• /
• v.46 no.1
• /
• pp.1-16
• /
• 2022

The purpose of this study is to explore learning progressions for global warming at middle school level. For this purpose, we conducted a construct modeling approach that specifies constructs, item designs, outcome spaces, and measurement model steps from April to October, 2021. In order to develop student assessment items, we analyzed the 2015 revised curriculum and textbooks of middle school and categorized a concept hierarchy for each construct to create a construct map. The assessment items were developed into multiple-choice, short answer, and essay questions according to the selected constructs to strengthen the linkage between the constructs and the items. Based on the three-step grading criteria for each item, an online assessment of 21 minor items developed for middle school students show that many students met 'high' level, but none met 'low' level. In this manner, the initial set lower anchor was reset to level 0, the original set upper anchor was lowered from level 4 to level 3, and the hypothetical learning progression for global warming was presented in the following order: phenomenal, conceptual, and mechanical understandings. The results of the research have raised implications for reorganizing the next science curriculum and improving the assessment system.

• Journal of Broadcast Engineering
• /
• v.27 no.2
• /
• pp.198-206
• /
• 2022

This paper proposes a method to solve problems that may occur when SPIHT(set partition in hierarchical trees) is used in a dedicated codec for compressing complex holograms with ultra-high resolution. The development of codecs for complex holograms can be largely divided into a method of creating dedicated compression methods and a method of using anchor codecs such as HEVC and JPEG2000 and adding post-processing techniques. In the case of creating a dedicated compression method, a separate conversion tool is required to analyze the spatial characteristics of complex holograms. Zero-tree-based algorithms in subband units such as EZW and SPIHT have a problem that when coding for high-resolution images, intact subband information is not properly transmitted during bitstream control. This paper proposes a method of dividing wavelet subbands to solve such a problem. By compressing each divided subbands, information throughout the subbands is kept uniform. The proposed method showed better restoration results than PSNR compared to the existing method.

• IE interfaces
• /
• v.16 no.4
• /
• pp.507-514
• /
• 2003

In personal communication systems location management of mobile terminals is required to connect incoming calls to the mobile terminals. Investigation of effective location update and paging strategies is important to reduce the cost of location management. In this study, we propose a paging strategy considering the mobile terminals' residence patterns. The first paging area is characterized by the set of cells in the location area where mobile terminals usually stay for a significant period of time. The rest of cells in the location area are included into the second paging area. To reduce the paging cost the first paging area is decided by reflecting various residence patterns of mobile terminals. For an incoming call, the sequential paging is performed in the order of the paging area. Thus the paging cost is greatly reduced, especially when the called mobile terminal is located in the first paging area. The proposed strategy is expected to be more effective than an existing strategy that uses the anchor cell in the location area.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2003.05a
• /
• pp.425-432
• /
• 2003

In personal communication systems, location management of mobile terminals is required to connect incoming calls to the mobile terminals. Investigation of effective location update and paging strategies is important to reduce the cost of location management. In this study, we propose a paging strategy considering the mobile terminals' residence patterns. The first paging area is introduced, which is characterized by the set of cells in the location area where mobile terminals usually stay for a significant period of time. We propose the decision criterion of the first paging area by comparing the cost against zone-based strategy. For an incoming call. we perform the sequential paging by the order of the first paging area and the rest of cells in the location area called by the second paging area. Thus the paging cost is greatly reduced, especially when the called mobile terminal is located in the first paging area. The proposed strategy is expected to be more effective than existing strategy using anchor cell in the location area because it reflects various residence patterns of mobile terminals.

• Structural Engineering and Mechanics
• /
• v.62 no.4
• /
• pp.443-453
• /
• 2017

The performance of bolted side-plated (BSP) beams is affected by the degree of transverse partial interaction, which is a result of the interfacial slip caused by transverse shear transfer between the bolted steel plates and the reinforced concrete beams. However, explicit formulae for the transverse shear transfer profile have yet to be derived. In this paper, a simplified piecewise linear shear transfer model was proposed based on force superposition principle and simplification of shear transfer profiles derived from a previous numerical study. The magnitude of shear transfer was determined by force equilibrium and displacement compatibility condition. A set of design formulae for BSP beams under several basic load cases was also derived. Then the model was verified by test results. A worked example was also provided to illustrate the application of the proposed design formulae. This paper sheds some light on the shear force transfer mechanism of anchor bolts in BSP beams, and offers a practical method to evaluate the influence of transverse partial interaction in strengthening design.

• Journal of Information Technology Services
• /
• v.8 no.1
• /
• pp.165-177
• /
• 2009

This paper reviews diverse IP mobility and fast handover mechanisms for seamless Internet services. Especially, fast handover mechanisms for the Proxy Mobile IPv6( PMIPv6) are categorized according to their approaches. Then, a new fast handover PMIPv6(FH-PMIPv6) mechanism is proposed using only L3 signaling message exchange. In the proposed FH-PMIPv6 mechanism, only local mobility anchor(LMA) exchanges L3 signaling messages with mobility access gateways(MAGs) for the fast handover operation. That is, inter-MAG signalling messages are not required for the fast handover operation. Therefore, unlike existing fast handover mechanisms, two relevant neighbouring MAGs need not set up the security association(SA) to protect fast handover related signaling messages and share SA related information. Moreover, the L3 triggering message is defined newly by standard ICMPv6 to trigger promptly the proposed mechanism. Analysis and comparison of the handover latency are performed for the proposed mechanism and existing mechanisms, which shows that the proposed FH-PMIPv6 mechanism has the favorable performance.

• Steel and Composite Structures
• /
• v.45 no.5
• /
• pp.749-766
• /
• 2022

This paper investigates the seismic performance of exposed RCFST column-base joints, in which the high-strength steel bars (USD 685) are set through the column and reinforced concrete foundation without any base plate and anchor bolts. Three specimens with different axial force ratios (n = 0, 0.25, and 0.5) were tested under cyclic loadings. Finite element analysis (FEA) models were validated in the basic indexes and failure mode. The hysteresis behavior of the exposed RCFST column-base joints was studied by the parametrical analysis including six parameters: width of column (D), width-thickness ratio (D/t), axial force ratio (n), shear-span ratio (L/D), steel tube strength (f_y) and concrete strength (f_c). The bending moment of the exposed RCFST column-base joint increased with D, f_y and f_c. But the D/t and L/D play a little effect on the bending capacity of the new column-base joint. Finally, the calculation formula is proposed to assess the bending moment capacities, and the accuracy and stability of the formula are verified.

• Journal of Broadcast Engineering
• /
• v.24 no.5
• /
• pp.713-725
• /
• 2019

Automatic License Plate Recognition (ALPR) is a technology required for many applications such as Intelligent Transportation Systems and Video Surveillance Systems. Most of the studies have studied were about the detection and recognition of license plates on cars, and there is very little about detecting and recognizing license plates on motorbikes. In the case of a car, the license plate is located at the front or rear center of the vehicle and is a straight or slightly sloped license plate. Also, the background of the license plate is mainly monochromatic, and license plate detection and recognition process is less complicated. However since the motorbike is parked by using a kickstand, it is inclined at various angles when parked, so the process of recognizing characters on the motorbike license plate is more complicated. In this paper, we have developed a 2-stage YOLOv2 algorithm to detect the area of a license plate after detection of a motorbike area in order to improve the recognition accuracy of license plate for motorbike data set parked at various angles. In order to increase the detection rate, the size and number of the anchor boxes were adjusted according to the characteristics of the motorbike and license plate. Image warping algorithms were applied after detecting tilted license plates. As a result of simulating the license plate character recognition process, the proposed method had the recognition rate of license plate of 80.23% compared to the recognition rate of the conventional method(YOLOv2 without image warping) of 47.74%. Therefore, the proposed method can increase the recognition of tilted motorbike license plate character by using the adjustment of anchor boxes and the image warping which fit the motorbike license plate.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.12
• /
• pp.97-107
• /
• 2009

Television News has significant impact on the information analysis of viewers by delivering world news to anonymous individuals everyday. We need to pay more attention to resolution considering the fact that even slight facial expression and the dress of TV anchor can be noticed by viewers in the high definition age, called HD TV, by radical changes in broadcasting situation. As a result, the beauty of expression that lighting technology has is extremely important in the high definition age. In news broadcast, as a phenomenon according to this change in trend, people have been looking for change in order to break with traditional TV news production by adopting DLP(Digital Lighting Processing) or LED(Light Emitting Diode). This effort has contributed to creating proper picture quality appropriate for HD TV. Nowadays Digital imaging is creating new trend in TV news production method from traditional analog-based lighting environment thanks to the development of IT(Information Technology) and digitalized lighting equipment. This change has led to building of HD studio and appropriate sets and lighting system. There are film set and projector which projects image on the screen and PDP, LCD, and DLP which has been used widely in recent years and LED which is often used as background in news program as examples, which has appeared since 1990s with HD TV. In this article, I analyzed the KBS News 9 lnce 1990s with in order to research the influence of television image component on the alyzed the KBS of TV article, I. I wille uggest the category of TV anchor image formulation in delivering information by means of lnce 1990s with based on the analysis result.

• Journal of Digital Convergence
• /
• v.12 no.1
• /
• pp.339-345
• /
• 2014

This study has a purpose that improves efficiency of energy management and adaptation followed by movement of node better than the various early studied routing techniques. The purpose of this paper is the technique that uses RSSI value and location of sensor that is received by each sensor node to routing. This sduty does not save node information of 1-hop distance. And it solves energy-inefficient traffic problem that happens during data exchange process for middle node selection in close range multi hop transmission technique. The routing protocol technique that is proposed in this study selects a node relevant to the range of transmission which is set for RSSI value that is received by each node and selects the closest node as a middle node followed by location data. Therefore, it is for not exhaustion of node's energy by managing energy efficiently and cutting data transmission consuming until the destination node.