• 한국소음진동공학회논문집
• /
• 제17권11호
• /
• pp.1043-1049
• /
• 2007

데이터 전송률과 저장용량은 광학디스크드라이브 성능의 주요 척도이다. 데이터 전송률은 높을수록 좋으며, 저장용량은 되도록 큰 것이 바람직하다. 이와 같은 성능을 증가시키기 위해 광학디스크드라이브의 액추에이터는 높은 서보대역폭을 가져서 광학디스크의 진동을 보상할 수 있어야 한다. 하지만 서보대역폭은 액추에이터의 몇몇 유연모드들에 의해 제한되므로 액추에이터 유연모드의 고유진동수를 높이는 설계가 필수적이다. 이 논문은 높은 유연모드 주파수를 갖는 가동 자석형 액추에이터를 제안한다. 일반적으로 가동 자석형 액추에이터는 가동부의 형태가 단순하고, 가동부 자석이 높은 영률을 가지기 때문에 유연모드 주파수를 높이는데 유리하다. 반면 가동부의 질량이 크고 자기 회로의 효율이 좋지 않아 액추에이터의 구동감도가 나쁘다. 이와 같은 단점을 극복하는 방편으로 구동감도를 향상시키기 위해 트랙킹 방향 구동을 위한 자기회로가 폐자기회로인 모델을 설계하였다. 추가로 실험계획법을 이용한 자기회로 개선을 통해 구동감도를 향상시켰으며, 유연모드 주파수 또한 렌즈 홀더의 변경을 통해 향상시켰다.

• 전기전자학회논문지
• /
• 제16권3호
• /
• pp.235-243
• /
• 2012

In this study, we developed two legged multi-joint robot by using wireless servo motor that was applied by wireless sensor network technology, which is widely used recently, and performed an experiment of walking method of two legged multi-joint robot. We constructed the star network with servo motors which were used at each joint of two-legged robot. And we designed the robot for operation by transmission of joint control signal from main control system or by transmission of the status of each joint to the main control system, so it operates with continuously checking the status of joints at same time. We developed the humanoid robot by using wireless digital servo motor which is different from existing servo motor control system, and controlled it by transmitting the information of angles and speeds of robot joints to the motor(node) as a feedback through main control system after connecting power and setting up the IDs to each joint. We solved noisy problem generated from wire and wire length to connection point of the control device by construction of the wireless network instead of using existing control method of wiring, and also solved problem of poor real time response to gait motion by controlling the position with continuous transmission of control signals to each joint. And we found that the effective control of robot is able by performing the simulation on walking motion in advance with the developed control algorithm which was downloaded into installed memory. Also we performed the stable walking with two-legged robot by attaching pressure sensor to robot sole. And we examined the robot gait operated by application of calculated algorithm on robot movement to each joint. In this study, we studied the method of controlling robot gait motion by using wireless servo motors and measured the torque applied to each joint, and found that the developed wireless servo motor by ZigBee sensor network offers easier control of two legged robot gait and better circuit configuration of it than the existing wired control system could do.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 추계학술대회 논문집
• /
• pp.225-226
• /
• 2012

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.1371-1372
• /
• 2013

• International Journal of Precision Engineering and Manufacturing
• /
• 제2권2호
• /
• pp.11-16
• /
• 2001

This paper presents an in self-calibration method to corrent the Z-directional distortion of AFM(Atomic Force Microscopy).

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.1072-1075
• /
• 1993

To design a fuzzy controller for DC servo-motor, a systematic procedure is proposed. Fuzzy rule base is simply designed through utilizing both the PID gain and the pole-zero cancelation. The results of simulation show that the control system has good performances.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 춘계학술대회 논문집
• /
• pp.283-284
• /
• 2009

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.479-483
• /
• 2006

As high-definition television(HDTV) broadcasting were generalized, there have been many researches and developments about large storage capacity and fast data transfer rate in optical disk drives(ODD). Pickup actuators must have high flexible mode frequencies and gain margins. Flexible modes are caused by the flexibility of moving parts in the actuator and a servo bandwidth is limited by them. As a result, the system becomes unstable for high-speed operations in high density reading and recording. In this paper, we suggest improved modeling method that considers the bonding layer. And, flexible mode frequency of actuator is improved by Design of Experiment of lens holder. Magnet circuit is designed considering the relation with moving part. Through improving yoke design, the magnetic flux is changed and DC tilt is reduced. Consequently, we designed actuator which has high flexible mode frequency and gain margins.

• 대한기계학회논문집A
• /
• 제20권10호
• /
• pp.3186-3198
• /
• 1996

When a robot is to have contact with its enviornment, such as a medi-care robot, it would be advantageous for the robot to have a high compliance. For this reason, a robot having not only a flexible link but also an actuator with compliance, is desirable. This paper is concerned with the position and vibration control of 1 degree of freedom flexible robot using a pneumatic artificial muscle actuator. The dynamics of the manipulator assumed to be and Euler-Bernoulli beam are derived on the basis of the linear mathematical modle. Although this pneumatic artifical muscle actuator has many merits for the compliance robot, it is difficult to make an effective control scheme of this system because of ths nonlinearity and uncertainty on the dynamics of the actuator. By designing a controller using .mu.-synthesis, robust performance against measurement noise, various modeling uncertainties on the dynamics of the servo valve, actuator and mainpulator, is achieved. The effectiveness of the proposed control method is illustrated through simulations and experiments.

• 대한기계학회논문집A
• /
• 제24권3호
• /
• pp.728-734
• /
• 2000

An asymmetric actuator can be used to reduce the distance between the reflective mirror and objective lens of a small optical disk drive for use in the notebook-sized personal computer data storage devices. However, this asymmetric actuator is very sensitive to the subsidiary resonance which is caused by its rigid body motion. In this paper, an analytical approach using a simple lumped parameter system model is presented with a physical insight to investigate why the subsidiary resonance occurs. The finite element method is used to figure out the force and torque characteristics of the asymmetric actuator which are essential to understand the subsidiary vibration characteristics. The frequency responses are presented to examine how the subsidiary resonance is altered for various situations of having different thickness of a yoke and permanent magnet and of having a different magnet circuit. Finally, the design guidelines to avoid the subsidiary resonance will be presented.