• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.7
• /
• pp.758-766
• /
• 1992

In this paper, the traffic control scheme used by M-cancel-Get services In CMIS /CMIP, OSI network management protocol, is presented and the performance is analyzed. M -Get service which allows a multiple response functional unit is a service that searches an attribute of the managed sys-tem and the service requires a large quantity of response as its typical characteristics. At the time, management response is transmitted Irrelevant to the network condition In the managed as well as In the management system. The management system requests M Canrel-Get service which informs the canrelation of M -Get service (or Information retrieval. In case of using M-Cancel-Get service for traffic control, the point of time for traffic control is propose by the result of simulation on management response time as the number of multiple response packets is Increased. The result is analyzed by processing ratio of the network workload and the average delay time of packets. As a result, the traffic control parameters proposed in the study show superiority in its processing ratio and the average packet delay time. Especially, its performance improves as the size of background traffic density Increase.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.12
• /
• pp.1-8
• /
• 2005

In this paper, we study a call admission control algorithm for supporting multicast service under the BcN environment where broadcasting, communication and Internet are converging to be one. It is necessary to control service requests with a certain criteria in order to guarantee QoS because the system capacity is limited. As a possible solution, we divide one multicast service into 3 classes and set up a threshold per each class to control service request. Especially, for the purpose of system benefit, we define system pay-off rate 'GAIN' with the term 'Reward' and 'Penalty' according to admit and reject service request. And we confine the range of threshold which makes GAIN to be maximized. For the performance analysis, we model the system as M/M/m/m queueing system, investigate GAIN under various conditions and show the effectiveness of the proposed algorithm.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.5
• /
• pp.383-388
• /
• 2021

Air-breathing engines used in aircraft have a performance limit as the altitude increases, and this determines the service and absolute ceiling altitude. The method of maintaining altitude and speed in a fixed-wing aircraft in level flight using classical control method is generally using thrust for speed increase/deceleration and pitch attitude for altitude increase/decrease. If this method is used near the service ceiling altitude, increasing the pitch to reduce the altitude error results in a speed reduction. Therefore, it is necessary to use a control method that maintains the speed first using the pitch attitude. Especially in the case of unmanned aerial vehicles, these two methods should be automatically available at the right time. In this paper, we propose a method of switching the speed and altitude maintenance algorithm near service ceiling altitude.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.10B
• /
• pp.936-944
• /
• 2006

In order to enhance their own customer satisfaction index that is one of the top level managerial performance indices, Internet communication service providers endeavor onto establishing a total quality management system. Specifically, it is under discussion that some critical Internet communication network quality characteristics closely related to customer satisfaction index should be controlled aiming to this managerial goal. This paper presents an application scheme of I-MR control charts for monitoring Internet communication network quality characteristics. This statistical quality control scheme generates a signal to practitioners when it detects the network quality characteristics out-of control. It is designed based on; 1) individual measurements; and 2) moving ranges between two consecutive individual measurements collected with a constant time interval. Empirical analyses are illustrated to estimate the expected quality improvement ratios that can be realized with the application scheme proposed in this paper. Assuming that the assignable causes can be revealed and eradicated, regarding two Internet communication services A, B, seven network quality characteristics for each service, eleven distinct measuring spots for each network quality characteristic, the expected quality improvement ratios are calculated with which the effect of the application scheme is evaluated. Results show the ranges of the expected quality improvement ratios; 1) Service A, (1) mean (0.31%-11.44%), (2) standard deviation (9.82%-71.10%): 2) Service B, (1) mean (0.29%-17.64%), (2) standard deviation (8.05%-60.59%). Hence, It is anticipated that the I-MR control charts based application scheme can be effective not only to improving the mean and dispersion of the network quality characteristics concerned but also to maintaining the network quality characteristics in-control consequently.

• ETRI Journal
• /
• v.20 no.2
• /
• pp.115-132
• /
• 1998

This paper proposes an extended service filtering technique to prevent overload in service control point (SCP) due to televoting (VOT) or mass calling (MAS) services with the heavy traffic characteristics. Also, this paper compares this extended technique with the existing overload control techniques, and calculates steady state call blocking probabilities in intelligent network (IN) under overload conditions. The proposed technique considers SCP overload and IN Capability Set (CS)-1 services (such as VOT or MAS service) that have to use the specialized resources of intelligent peripheral (IP). This technique uses first an activating step in which SCP requests service filtering to service switching point (SSP). Then, in the filtering step, SSP sends filtering results to SCP periodically or each N-calls. Also, when filtering time-out expires, SSP stops service filtering, and sends service filtering response to SCP in the deactivating step. This paper applies this technique to VOT/MAS service, and calculates SCP and SSP-IP (circuit) call blocking probabilities by using an analytical VOT/MAS service model. With the modeling and analyzing of this new technique, it shows that this technique reduces the traffic flow into SCP from SSP and IP prominently.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1413-1415
• /
• 2004

This paper proposes a SVM(Support Vector Machine) training algorithm to control a service robot with voice command. The service robot with a stereo vision system and dual manipulators of four degrees of freedom implements a User-Dependent Voice Control System. The training of SVM algorithm that is one of the statistical learning theories leads to a QP(quadratic programming) problem. In this paper, we present an efficient SVM speech recognition scheme especially based on less learning data comparing with conventional approaches. SVM discriminator decides rejection or acceptance of user's extracted voice features by the MFCC(Mel Frequency Cepstrum Coefficient). Among several SVM kernels, the exponential RBF function gives the best classification and the accurate user recognition. The numerical simulation and the experiment verified the usefulness of the proposed algorithm.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1093-1098
• /
• 2003

In this paper, a practical methodology of hand-manipulator motion coordination for indoor service robot is introduced. This paper describes the procedures of opening door performed by service robot as a noticeable example of motion coordination. This paper presents well-structured framework for hand-manipulator motion coordination, which includes intelligent sensor data interpretation, object shape estimation, optimal grasping, on-line motion planning and behavior-based task execution. This proposed approach is focused on how to integrate the respective functions in harmony and enable the robot to complete its operation under the limitation of usable resources. As a practical example of implementation, the successful experimental results in opening door whose geometric parameters are unknown beforehand are provided.

• Proceedings of the Korea Contents Association Conference
• /
• 2004.11a
• /
• pp.5-10
• /
• 2004

In this paper, we propose a service control framework and user interface in a class automation of ubiquitous computing environment. We propose UPnP-based service control architecture and introduce an example service scenarios for automatic classroom. We present context-aware design approaches to argument user interface. We also present intelligent content authoring that facilitates producing e-learning content using activity context.

• Journal of information and communication convergence engineering
• /
• v.15 no.1
• /
• pp.28-36
• /
• 2017

The medium access control (MAC) protocol based on dynamic time division multiple access/time division duplex (TDMA/TDD) is responsible for random access control and radio resource allocation in dynamic traffic environments. These functions of random access and resource allocation are very important to prevent wastage of resources and improve MAC performance according to various network conditions. In this paper, we propose new random access and resource allocation schemes to guarantee quality of service (QoS) and provide priority services in a dynamic TDMA/TDD system. First, for the QoS guarantee, we propose an adaptive random access and resource allocation scheme by introducing an access probability. Second, for providing priority service, we propose a priority-based random access and resource allocation scheme by extending the first adaptive scheme in both a centralized and a distributed manner. The analysis and simulation results show that the proposed MAC protocol outperforms the legacy MAC protocol using a simple binary exponential backoff algorithm, and provides good differential performance according to priorities with respect to the throughput and delay.

• Korean Journal of Veterinary Service
• /
• v.31 no.3
• /
• pp.425-431
• /
• 2008

A strategic national plan to control of zoonoses is currently somewhat insufficient. Government should extensively assign all case reports of zoonotic disease outbreaks and needs to control them in the context of other decrees. Additionally capacity of veterinarian needs to he increased to control zoonotic diseases efficiently. Namely, veterinarian is responsible for reporting to health authorities if any of zoonotic diseases are diagnosed. Furthermore, government should deploy the veterinarian's resources for prompt epidemiological investigation and for taking countermeasures against zoonotic diseases.