• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년 추계학술대회논문집
• /
• pp.19-26
• /
• 2008

From numerical point of view on flow network system analyses, stagnation properties are not preserved along streamlines across geometric discontinuities. Hence, GJM and DTM using ghost cell and thermodynamic relations are developed to preserve the stagnation enthalpy for the boundaries, such as the interfaces between junction and branches and the interface between two pipes of different cross-sections in serial pipelines. Additionally, the resolving power and efficiencies of the 2nd order Godunov type FV schemes are investigated and estimated by the tracing of the total mechanical energy during calculating rapid transients. Among the approximate Riemann solvers, RoeM is more suitable with the proposed boundary treatments especially for junction than Roe's FDS because of its conservativeness of stagnation enthalpy across geometric discontinuities.

• 전자공학회논문지A
• /
• 제31A권2호
• /
• pp.75-80
• /
• 1994

AlAs/GaAs/AlAs RTDs(Resonant Tunneling Diodes) are fabricated and current-voltage properties of them are measured. At room temperature, peak to valley ratio is 2.4 NOT.AND.OR logic gates and Flip-Flop are fabricated using the bistable characteristics of RTDs. Although NOT.AND.OR logic gates need 5~8 transistors. only one RTD is sufficient to fabricate the logic gates. Since the switching time is very short(<10$^12$sec), it is possible to drive the semiconductor circuits fast and integrate them very large. And it is convinced the possibility of integrating RTDs to multilevel logic circuits by observing two peaks of similar current in the serial connection of two RTDs.

• 전자공학회논문지S
• /
• 제36S권2호
• /
• pp.88-95
• /
• 1999

스텍필터는 신호복원성이 뛰어난 디지털 비선형 필터의 일종이다. 그러나 기존의 적응형 설계기법을 이요하면 순차적인 특성 때문에 윈도우의 크기가 큰 스텍필터의 설계시 많은 계산량으로 그 응용에 한계가 있었다. 본 논문에서는 평균적대오차를 최소화하는 최적의 스텍필터를 설계하기 위한 병렬구조의 기법을 제안하였고 제안된 기법을 사용하면 적응특성 즉 학습의 반복적인 특성을 가지면서 최적의 필터로 수령하는데 필요한 반복 횟수를 줄임으로써 기존의 설계기법보다 설계시간을 단축할 수 있다는 사실과 제안된 기법이 최적의 스텍필터로 수렴한다는 사실을 증명하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1236-1237
• /
• 2008

Carbon nanotube(CNT) materials are expected a stable current collector without the phenomena such as oxidizing and melting of grid by redox electrolyte and with low cost. In this paper, two types of dye-sensitized solar cells(DSSCs) with Pt abd CNT as a counter electrode were fabricated, then the energy conversion efficiency characteristics were investigated. The main purpose of this study is to find out the possibility of CNT material as cheap current collector of a large scale DSSC module. In addition, the Hall coefficient were measured by using FCM analysis.

• 한국정밀공학회지
• /
• 제15권8호
• /
• pp.60-70
• /
• 1998

A harmonic drive is compact torque transmission device with no backlash which is widely applied in industrial field to transmit torque precisely. However, one of the disadvantages of harmonic drives is the existence of mechanical flexibility caused by its structural properties, which imposes great limitation on designing precise controller This paper proposes a nonlinear controller for synchronous operation of DC servo-motors with harmonic drive, using Integrator Backstepping method. Furthermore, an alternative algorithm for serial type synchronous operation of multiple DC servo-motors is proposed. Simulation results by SIMULINK for proposed controller shows considerably small error and rapid approach to reference input, which can be adapted to industrial applications.

• 미생물학회지
• /
• 제13권2호
• /
• pp.64-70
• /
• 1975

As a serial experiment of radiosterilization of medical products, we investigated the feasibility of using gamma ray to sterilize antibiotics, tetracycline HCl. Tetracycline HCl in aqueous solution and dried state irradiated with several dose levels was assayed for physico-chemical properties by checking UV absorption spectra, paper chromatogrph. IR spectra and NMR sepctra, and antibiotic activities by [means of agar plaque technique and tube $d_1$]ution method. In physico-chemical propertis and biological activities, the teracycline HCl in dried state remained radioresistant up to exposure of 10 Mrad, however, in aqueous solution, the dose of 300 Krad produced a significant inactivation. From the results of this study, radiosterilization of tetracycline HCl is more recommendable in the dried state than in aqueous solution.

• Archives of Pharmacal Research
• /
• 제3권1호
• /
• pp.31-36
• /
• 1980

Seeds or beans of 55 plants belonging to 31 families were screened by using several different types of red blood cells to find new lectins. In this paper, white kidney been (phaseolus vulgaris C.) was chosen to study biochemical properties of hemagglutinating proteins(lectins). An anion exchanger, DEAE Sephadex A-50, and polyacrylamide disc gel electrophoresis were main techniques used. From three main fractions eluted by stepwise NaCl gradient in 25mM Tris-HCI buffer on DEAE Sephadex column, principal lectin was identified.

• 전기학회논문지
• /
• 제60권2호
• /
• pp.338-343
• /
• 2011

In this paper, the FT-IR, conductivity and flow electrification phenomena of Vegetable oils were discussed. Vegetable oil has high flash point and eco-friendly properties compared to conventional mineral oil. Accelerated aging transformer oil samples produced in the oven at 140[$^{\circ}C$] for 500 hours, 1000 hours, 1500 hours, 2000 hours. Serial device to measure the flow electrification phenomena was designed and fabricated. Pico ammeter and the Labview data measurements were utilized. The effects of Temperature and antistatic agent on fluid flow electrification were investigated. Both Mineral and vegetable oil showed similar trends for temperature change. The polarity reversal occurred in mineral oil with antistatic agent above 10 ~ 30[ppm] and in vegetable oil with antistatic agent above 5[ppm].

• Industrial Engineering and Management Systems
• /
• 제1권1호
• /
• pp.29-45
• /
• 2002

In this study, we consider infinite supply of raw materials and backlogged demands as given two boundary conditions. And we need not make any specific assumptions about the inter-arrival of external demand and service time distributions. We propose a numeric model and an algorithm in order to compute the first two moments of inter-departure process. Entropy enables us to examine the convergence of this process and to derive measurable relations of this process. Also, lower bound on the variance of inter-departure process plays an important role in proving the existence and uniqueness of an optimal solution for a numeric model and deriving the convergence order of augmented Lagrange multipliers method applied to a numeric model. Through these works, we confirm some structural properties and numeric examples how the validity and applicability of our study.

• Restorative Dentistry and Endodontics
• /
• 제38권1호
• /
• pp.36-42
• /
• 2013

Objectives: This study evaluated the antibacterial effect and mechanical properties of composite resins ($L_{CR}$, $M_{CR}$, $H_{CR}$) incorporating chitosan with three different molecular weights (L, Low; M, Medium; H, High). Materials and Methods: Streptococcus (S). mutans 100 mL and each chitosan powder were inoculated in sterilized 10 mL Brain-Heart Infusion (BHI) solution, and was centrifuged for 12 hr. Absorbance of the supernatent was measured at $OD_{660}$ to estimate the antibacterial activities of chitosan. After S. mutans was inoculated in the disc shaped chitosan-containing composite resins, the disc was cleansed with BHI and diluted with serial dilution method. S. mutans was spread on Mitis-salivarius bacitracin agar. After then, colony forming unit (CFU) was measured to verify the inhibitory effect on S. mutans biofilm. To ascertain the effect on the mechanical properties of composite resin, 3-point bending and Vickers hardness tests were done after 1 and 3 wk water storage, respectively. Using 2-way analysis of variance (ANOVA) and Scheffe test, statistical analysis was done with 95% significance level. Results: All chitosan powder showed inhibition effect against S. mutans. CFU number in chitosan-containing composite resins was smaller than that of control resin without chitosan. The chitosan containing composite resins did not show any significant difference in flexural strength and Vickers hardness in comparison with the control resin. However, the composite resin, $M_{CR}$ showed a slightly decreased flexural strength and the maximum load than those of control and the other composite resins $H_{CR}$ and $L_{CR}$. Conclusions: $L_{CR}$ and $H_{CR}$ would be recommended as a feasible antibacterial restorative due to its antibacterial nature and mechanical properties.