• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.129.2-129.2
• /
• 2010

As a part of the government renewable energy policy, KOWEPO is constructing 300MW IGCC plant in Taean. IGCC plant consists of gasification block, air separation unit and power block, which performance test is separately conducted. Overall performance test for IGCC plant is peformed to comply with ASME PTC 46. Major factors affected on the overall efficiency for IGCC plant are external conditions, each block performance(gasification, ASU, power block), water/steam integration and air integration. Performance parameters of IGCC plant are cold gas efficiency, oxygen consumption, sensible heat recovery of syngas cooler for gasification block and purity of oxygen, flow amount of oxygen and nitrogen, power consumption for air separation unit and steam/water integration among the each block. The gas turbine capacity applied to the IGCC plant is 20 percent higher than NGCC gas turbine due to the low caloric heating value of syngas, therefor it is possible to utilize air integration between gas turbine and air separation unit to improve overall efficiency of the IGCC plant and there is a little impact on the ambient condition. It is very important to optimize the air integration design with consideration to the optimized integration ratio and the reliable operation. Optimized steam/water integration between power block and gasification block can improve overall efficiency of IGCC plant where the optimized heat recovery from gasification block should be considered. Finally, It is possibile to achieve the target efficiency above 42 percent(HHV, Net) for 300MW Taean IGCC plant by optimized design and integration.

• 한국산학기술학회논문지
• /
• 제11권2호
• /
• pp.590-596
• /
• 2010

본 연구에서는 디젤대체 연료와 LPG 혼합용 및 도시 가스의 발열량을 높이기 위한 첨가제로 사용할 수 있는 DME 분리공정에 대한 올바른 열역학 모델식의 선정에 대한 해석을 시도하였다. 물과 메탄올 용매 사이의 액상에서의 비이상성을 해석하기 위해서 NRTL 액체 활동도계수 모델식을 사용하였으며, 기상에서 이상기체의 비이상성을 해석하기 위해서 Peng-Robinson 상태방정식을 사용하였다. 한편, Methanol absorber에서 메탄올 수용액 중의 $H_2$, CO, $CO_2$, $H_2$, $CH_4$과 $N_2$ 등과 같은 비응축성 기체의 용해도를 추산하기 위해서 온도와 압력의 함수로 나타낸 Henry parameter를 사용하였다. 사례 연구를 통해서 원료에 대한 용매의 몰 유량비가 3.40일 때 최적이 됨을 알 수 있었다.

• Membrane and Water Treatment
• /
• 제7권6호
• /
• pp.521-537
• /
• 2016

Laboratory-scale experiments were carried out to investigate the adsorption equilibrium, the adsorption kinetics and facilitated transport of two cationic dyes (Methylene Blue (MB) and Rhodamine B (RB)) on Polymer Inclusion Membrane (D2EHPA-PIM). Different adsorption isotherms (Freundlich, Langmuir and Temkin models) as well as kinetics models indicated that the adsorption process is spontaneous and exothermic. Under the optimal conditions, the adsorption removal efficiencies reach about 93% and 97% for MB and RB respectively. Different extraction values by D2EHPA-PIM were obtained for the two cationic dyes: MB is weakly extracted at pH 2.0 (E% = 18.7%) whilst E% = 82.4% was observed for RB at the same pH. This difference was exploited in a mixture containg both the 2 cationic dyes for the selective extraction of RB at pH 2. Desorption of both dyes was achieved from the membrane by using acidic aqueous solutions and desorption ratio up to 90% was obtained. The formulas of the extracted complexes by the PIMs were, determined by the method of slopes. The dyes transport was elucidated using mass transfer analysis where in it found relatively high values of the initial flux ($J_0$) as 41.57 and $18.74{\mu}mol.m^2.s^{-1}$ for MB and RB respectively.

• 멤브레인
• /
• 제16권3호
• /
• pp.204-212
• /
• 2006

이산화탄소에 대한 가소화 안정성 및 이산화탄소/질소의 분리특성이 탁월한 폴리이서술폰(PES)중공사 분리막에 의한 이산화탄소 분리특성을 수치해석으로 알아보고자 하였다. 공정변수에 따른 이산화탄소 분리 거동을 예측하기 위하여 공급 기체와 투과기체가 같은 방향으로 흐르는 병류 흐름에 대한 분리막 공정 지배 방정식을 5차 Runge-Kutta-Verner 방법을 사용하여 Compaq Visual Fortran 6.6 소프트웨어를 이용 공정모사 프로그램을 개발하였다. 개발된 프로그램을 사용하여 수치해석을 수행한 결과, 이산화탄소 투과특성에 영향을 주는 가장 중요한 인자로서 공급 이산화탄소 분압, 투과측과 분리막 내부의 압력비 그리고 공급 기체가 분리막 내부에 머무르는 체류 시간임을 알 수 있었다.

• 폴리머
• /
• 제26권6호
• /
• pp.710-717
• /
• 2002

주형분자로서 all-trans-retinoic acid를 사용하여 methacrylic acid (MAA)를 가교 중합함으로써 분자각인고분자를 제조하였다 제조된 분자각인고분자가 충전된 HPLC컬럼의 분리특성을 살펴본 결과 레티노이드 유도체에 대해 좋은 분리 특성을 보였다. 주형분자의 양이 일정할 경우 주형분자대비 MAA의 양이 증가할수록 컬럼의 성능인자와 선택도는 높게 나타났으며, 이는 확률적으로 보다 많은 호스트분자와 주형분자간의 결합소를 제공한데 따른 결과이다. 유화중합에 의해 제조된 분자각인 고분자입자는 둥근 형태로 관찰되었으며 그 크기도 용액중합에 의해 제조된 것에 비해 훨씬 일정하게 분산되었으나, 분리특성은 효율이 떨어짐을 알 수 있었다 이러한 이유는 유화중합에 의한 분자각인고분자 제조시 물과 MAA 또는 물과 주형분자간의 수소결합에 의해 MAA와 주형분자간의 결합력 및 결합소의 수에 손실이 있었기 때문이다.

• 대한치과기공학회지
• /
• 제12권1호
• /
• pp.15-21
• /
• 1990

This research was to investigate and study on 92 Dental Technicians who had had some experience of working or being employed at dental craft-shops or craft-rooms in Seoul area and had transferred to other types of occupation, with regard to their reasons for changing their profession. For an approach to the study, some questionnaires and interview including 3 aspects of in quiriesmental, economic and social backgrounds-were administered, and major findings are as follows ; 1. The ages in which transferring to other kinds of job happened occurred mostly from 20 to 30(78.26%) an a group of subjects whose ages ranged from 20 to 30 years old. And, with regard to their experience of working or being employed at dental craft-shops or craftrooms, the transfer of their profession to the other kinds mosty happened in a group of subjects(94.56%) whose experience of working in the dental field is less than 4 years. 2. The reason of transfer with reference to the mental background was mostly mattered in a group that expressed "Excessive Work Duties"(34.78%), and most lowly mattered in a group of subjets who had "Certain Relations with Dentists"(8.70%). Thus, it appeared that the biggest reason of transfer by the mental background was, due to the excessive duty work, not to have Sufficient time to be usualized by dental technicians for their own purpose. 3. With reference to the economical background, a group that declared there was "No Wage Standards in Ratio to Their Labor" was the most in the separation rate as shown 45.56%. And, a group suspecting "No Guarantee for Their Living after Retirement" Showed a separation rate, 9.78%. In other words, the reason for transfer was that they did not receive due wage according to their amount of labor. 4. With reference to the social background, a group making a subject for no good working environments or conditions had a separation rate, 41.30%, which was the most among others, and a group with a subject of "The Rarity of Employment because of Excessive Supply of Dental Technicians" had the rate, 10.87%, which was the lowest. This meant that the major cause of transfer by the social background was a phenomenon for dental technicans to escape from unclean working places.

• 자원리싸이클링
• /
• 제22권5호
• /
• pp.35-42
• /
• 2013

Nd와 Pr이 함유된 염산용액에서 PC88A와 D2EHPA에 의한 두 금속의 분리에 적합한 조건을 조사하기 위해 용매추출실험을 수행하였다. 본 연구의 실험조건에서 Nd의 분배계수가 Pr의 분배계수보다 컸다. PC88A와 D2EHPA로 추출하는 경우 금속과 추출제와의 농도비의 증가가 두 금속의 추출 및 분리에 큰 영향을 미쳤다. D2EHPA의 비누화율과 초기 pH는 두 금속의 추출에는 큰 영향을 미치지만, 분리인자에는 큰 변화가 없었다.

• 자원리싸이클링
• /
• 제12권3호
• /
• pp.25-30
• /
• 2003

본 연구의 목적은 실리콘웨이퍼의 절단공정에서 발생한 폐슬러리와 폐망간전지에서 발생하는 흑연봉을 각각 규소 및 탄소의 출발물질로 사용하여 가스터빈 부품, 열교환기 등에 사용되는 탄화규소(SiC)를 합성하는 연구를 수행하였다. 실리콘웨이퍼의 절단공정에서 발생하는 폐슬러리로부터 비중차이에 의한 선별과 자력선별 등에 의해 정제된 규소와 탄화규소를 얻을 수 있었으며, 폐망간전지를 해체하여 얻은 탄소봉으로부터 수세와 분쇄를 통하여 탄소분말을 얻을 수 있었다. 탄화규소의 합성은 규소와 당량비의 탄소분발을 혼합하여 1$600^{\circ}C$이상의 온도에서 아르곤 분위기와 진공분위기 하에서 2시간 유지시켰을 때 이루어졌으며, 이때 합성된 탄화규소의 순도는 99% 이상이었다.

• Journal of the Korean Wood Science and Technology
• /
• 제21권3호
• /
• pp.30-36
• /
• 1993

Wood chips of oak (Quercus mongolica) and larch (Larix leptolepis) were treated with a relatively low pressure steam(10~20 kg/$cm^2$) for 10~20 min (first-stage),and then increased pressure up to 30kg/$cm^2$ for 30 second (second-stage), and steam pressure was released intentionally to air. Main components of exploded wood were separated with 1% NaOH and hot water-methanol. In this work, the more effective low pressure explosion condition and separation method of wood main component were investigated. The results can be summarized as follows; 1. The yields of exploded wood were generally decreased with increasing steam pressure and reaction time. 2. The proper condition of steam explosion in low pressure for the separation of wood main components was 15kg/$cm^2$-10 min, in oak wood and 20kg/$cm^2$-10 min., then 30kg/$cm^2$-0.5 min, in larch wood. 3. The 23% of elude hemicellulose was obtained from the exploded oak wood which was treated with optimal condition. 4. In the case of hot water-methanol extraction, the ratio of delignification was 14~23% in the exploded larch wood and 42~55% in the exploded oak wood. 5. The methanol was more effective than 1% sodium hydroxide solution for extraction of lignin from exploded wood.

• 한국물환경학회지
• /
• 제36권6호
• /
• pp.489-499
• /
• 2020

Effective science-based management of the basin water resources requires an understanding of the characteristics of the streams, such as the baseflow discharge. In this study, the base flow was estimated in the two watersheds with the least artificial factors among the Nakdong River watersheds, as determined using the chemical hydrograph separation technique. The 16-year (2004-2019) discontinuous observed stream flow and electrical conductivity data in the Total Maximum Daily Load (TMDL) monitoring network were extended to continuous daily data using the TANK model and the 7-parameter log-linear model combined with the minimum variance unbiased estimator. The annual base flows at the upper Namgang Dam basin and the upper Nakdong River basin were both analyzed to be about 56% of the total annual flow. The monthly base flow ratio showed a high monthly deviation, as it was found to be higher than 0.9 in the dry season and about 0.46 in the rainy season. This is in line with the prevailing common sense notion that in winter, most of the stream flow is base flow, due to the characteristics of the dry season winter in Korea. It is expected that the chemical-based hydrological separation technique involving TANK and the 7-parameter log-linear models used in this study can help quantify the base flow required for systematic watershed water environment management.