• Journal of the Korean Applied Science and Technology
• /
• v.32 no.2
• /
• pp.290-295
• /
• 2015

The purpose of this study is to separate nitrocellulose from 175 mm ammunition propellant by environmentally responsible recovery method. Recovery of nitrocellulose from obsolete ammunition is much more desirable than destruction since it can be reused in the several purpose. In spite of durable demilitarization of obsolete ammunition, the current holding amount of obsolete ammunition is gradually increasing and accumulated. The existing demilitarization methods, such as incineration and priming are strictly restricted for the noise, dust, oscillation and air and soil pollution. This study is focused on the separation of nitrocellulose by environmentally responsible recovery method by the solubility difference of nitrocellulose in nonpolar solvent. The purity of an extracted nitrocellulose was analysed by IR and TLC method and was clarified as very high.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.8
• /
• pp.992-1003
• /
• 2003

This study analyzes the actual state of the working uniforms worn by burning waste workers to protect their body from the hazardous environment. Directions for improvement of the clothing fabrics is also suggested. We visited and interviewed those persons who worked in the burning waste plant in Seoul and in Gyunggi Province. 245 workers were surveyed by questionnaires, and 211 workers out of 245 were statistically analyzed. Frequencies and percentages were calculated and $\chi$$^2$ test, ANOVA and Scheffe Post hoc comparison methods were utilized to test some hypothesis. The working uniforms were classified as four general types: separate type, disposable-coverall. overall, and winter clothes. At present, the working uniforms are not suitable for the conditions which they are used. There is a lack of ventilation and an inability to absorb perspiration limited elasticity, and the uniforms are prone to static shock. The degree of satisfaction varied significantly, based on the worker's educational background and main work. However, only a small percentage of workers interviewed were satisfied with the appearance and the fit of the present working uniforms. The working duration had a negative impact on the satisfaction of the worker. This results suggest that materials, colors, design and size of working clothes must be improved. The suggestions are as follows: Firstly. to use disposable non-woven fabrics finished to increase moisture regain. Secondly. to use the bad air permeability fabrics to protect the skin from absorbtion of harmful gases, flying dust, heavy metals, etc.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.6
• /
• pp.923-931
• /
• 2013

RFID (Radio Frequency Identification), which is a kind of the electronic tag, is a wireless access device using the radio frequency for recognizing the ID information. It has a variety of application such as the bus card, gate access card, distribution industry, and management of construction materials. The performance and size of RFID depend on the penetrability, recognition ratio, memory size, multi tag recognition, external pollution dust, and exterior impact, and RFID requires the packaging to protect itself considered above factors. Recently, RFID is diversely employed to effectively manage construction materials and the RFID packaging, which is robust to the external impact, is required to attach RFID on construction materials. In this paper, we propose the construction material RFID packaging designed to be robust for the external impact and to be practicable for change of the broken RFID. For the change of RFID, we separate the cast and body of the packaging. Also, we present the detail drawing for the proposed construction material RFID packaging and implement the performance evaluation of the packaging manufactured using 3D printer.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.24 no.2
• /
• pp.229-237
• /
• 2014

Objectives: This study intends to determine the current status of management of personal protective equipment fume hoods in university laboratories. Methods: A walk-through survey of 402 labs in Gyeongbuk Province and Daegu Metropolitan City were carried out between May 2009 and July 2010. Respectively, 348 and 54 laboratories were examined in Gyeongbuk Province and Daegu. Results: In size, labs serving over 15,000 student made up the majority with 276(66.4%). In terms of major, engineering labs were the highest in number with 100(24.9%). As to personal protective equipment, a gas mask and a dust mask were available in 17.8% and 14.3% of the labs, respectively, but 68.9% of labs were equipped with protective goggles. Meanwhile, only 12.7% of labs had separate protective equipment storage boxes. About 60% of the labs had installed a fume hood, of which the average capture velocity was 0.37 m/sec. Conclusions: For toxic substances, the labs are obliged to provide personal protective equipment in in accordance with the Occupational Safety and Health Act. In addition, the capture velocity of fume hoods must be in strict compliance in order to prevent occupational diseases due to toxic chemicals.

• Journal of Energy Engineering
• /
• v.27 no.2
• /
• pp.32-48
• /
• 2018

Monitoring of energy use should be a priority in order to efficiently manage building energy use. Energy use in buildings can be managed by dividing them into energy sources, uses, and ZONE. By energy source, electricity, gas, fuel, and district heating are supplied to run the building's facilities. The purpose can be divided into five main applications, including cooling, heating, lighting, hot water and ventilation, but not many elevators and electric heaters that are difficult to include in the five applications are classified. ZONE Star refers to the comparison or separate management of areas for which the purpose of the building is similar or different. In addition, energy efficiency management requires control of the temperature, humidity, and people who will be measuring energy in the building, and the recent problem of fine dust should directly affect the ventilation of the building.

• The Korean Journal of Physiology
• /
• v.30 no.1
• /
• pp.77-83
• /
• 1996

Platelet-activating factor(PAF) is a phospholipid mediator of pulmonary inflammation, and immunologic reaction. In this study, the role of PAF on tumor necrosis factor$(TNF_{-{\alpha}})$ production by rat alveolar macrophages(AM) was examined. When PAF $(10^{-12}{\sim}10{-16}\;M)$ alone was added to AM culture, $(TNF_{-{\alpha}})$ production was not significantly increased above the resting level. In contrast, the combined addition of PAF $(10^{-6}\;M)$ and muramyl dipeptide(MDP) $(1.0\;{\mu}g\ml)$ to AM cultures markedly enhanced $(TNF_{-{\alpha}})$ production with 8.2 fold increase compared with AM culture in resting state. This potentiative effect was 313% above the sum of the separate effects of PAF and MDP. To characterize MDP effects on $(TNF_{-{\alpha}})$ production, the dose-response of AM cultured with various concentrations of MDP was tested. High level of MDP $(10\;{\mu}g\ml)$ could not significantly enhance the potentiation effect on $(TNF_{-{\alpha}})$ production compared with AM cultures with low level of MDP $(0.1\;{\mu}g\ml)$, i.e. 112.5% vs 107.8%, respectively when $10^{-10}$ M of PAF was simultaneously added to the cell culture. These data support that the potentiation of TNF. g production in AM culture is mediated by PAF rather than MDf It was also evaluated whether the similar result was obtained in silica, respirable toxic particle-treated AM culture. $(TNF_{-{\alpha}})$ production was also significantly enhanced in the PAF $(10^{-6}\;M)$ and silica $(50\;{\mu}g\ml)$-added cell cultures with 4.7 fold above the value of silica alone-stimulated cells. These results indicate that PAF can potentiate $(TNF_{-{\alpha}})$ production by MDP-or silica- stimulated AM and suggest that PAF may play a potent role in lung inflammation and disease associated with microbe and occupational dust exposures.

• Parasites, Hosts and Diseases
• /
• v.42 no.3
• /
• pp.93-119
• /
• 2004

Acanthamoeba and Naegleria are widely distributed in fresh water, soil and dust throughout the world, and cause meningoencephalitis or keratoconjunctivitis in humans and other mammals. Korean isolates, namely, Naegleria sp. YM-1 and Acanthamoeba sp. YM-2, YM-3, YM-4, YM-5, YM-6 and YM-7, were collected from sewage, water puddles, a storage reservoir, the gills of a fresh water fish, and by corneal washing. These isolates were categorized into three groups based on the mortalities of infected mice namely, highly virulent (YM-4), moderately virulent (YM-2, YM-5 and YM-7) and nonpathogenic (YM-3). In addition, a new species of Acanthamoeba was isolated from a freshwater fish in Korea and tentatively named Korean isolate YM-4. The morphologic characters of its cysts were similar to those of A. culbertsoni and A. royreba, which were previously designated as Acanthamoeba group III. Based on experimentally infected mouse mortality, Acanthamoeba YM-4 was highly virulent. The isoenzymes profile of Acanthamoeba YM-4 was similar to that of A. royreba. Moreover, an anti-Acanthamoeba YM-4 monoclonal anti-body reacted only with Acanthamoeba YM-4, and not with A. culbertsoni. Random amplified polymorphic DNA marker analysis and RFLP analysis of mitochondrial DNA and of a 188 small subunit ribosomal RNA, placed Acanthamoeba YM-4 in a separate cluster based on phylogenic distances. Thus Acanthamoeba YM-4 was identified as a new species, and assigned Acanthamoeba sohi. Up to the year 2002 in Korea, two clinical cases were found to be infected with Acanthamoeba spp. These patients died of meningoencephalitis. In addition, one case of Acanthamoeba pneumonia with an immunodeficient status was reported and Acanthamoeba was detected in several cases of chronic relapsing corneal ulcer, chronic conjunctivitis, and keratitis.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.31 no.2
• /
• pp.39-44
• /
• 2023

This study was conducted to analyze problems related to non-water-soluble sanitary products during the treatment of water regeneration centers in E.T.F. and S.T.F. at a time when the demand and supply of non-water-soluble sanitary products are increasing. As a result, the improvement plan of the W.R.C. should focus on pretreatment facilities. When replacing facilities in the future, various dust removers suitable for the facility's reality will be installed in the pretreatment of S.T.F., and it is proposed to link a bar-racks screen with a comprehensive treatment device or install a comprehensive treatment device for impurities alone in the pretreatment of E.T.F.. In addition, a microscreen screen must be installed on the front end of the excretory treatment unit. to separate non-water-soluble materials, and it is necessary to secure a maintenance space for the excretory treatment unit.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.11
• /
• pp.570-576
• /
• 2020

This study uses beacons and smartphone Global Positioning System (GPS) receivers to establish a location-based disaster/hazard prediction system. Beacons are usually installed indoors to locate users using triangulation in the room, but this study is differentiated from previous studies because the system is used outdoors to collect information on registration location and temperature and humidity in hazardous areas. In addition, since it is installed outdoors, waterproof, dehumidifying, and dustproof functions in the beacons themselves are required, and in case of heat and humidity, the sensor must be exposed to the outside, so the waterproof function is supplemented with a separate container. Based on these functions, information on declining and vulnerable areas is identified in real time, and temperature/humidity information is collected. We also propose a system that provides weather and fine-dust information for the area concerned. User location data are acquired through beacons and smartphone GPS receivers, and when users transmit from declining or vulnerable areas, they can establish the data to identify dangerous areas. In addition, temperature/humidity data in a microspace can be collected and utilized to build data to cope with climate change. Data can be used to identify specific areas of decline in a microspace, and various analyses can be made through the accumulated data.

• The Journal of the Korea Contents Association
• /
• v.21 no.3
• /
• pp.567-575
• /
• 2021

Residents in Dangjin, South Chungcheong Province, in which large-scale emissions facilities such as coal-fired power plants and steel mills are concentrated, are very much concerned about their health despite the local government's aggressive efforts to improve air quality and reduce greenhouse gases. To understand the impact of coal-fired power plants and external factors on local air pollution, the origins of local pollutants were investigated using stable carbon isotopes that are generally used as tracers of the provenance of fine or ultrafine dust. The origins of the pollutants were analyzed with the data library, built using the seasonally measured data for the two separate locations selected considering the distance from the coal-fired power plant and the analysis of previous studies, and with the back trajectory analysis. As a result of analyzing stable isotope ratios, the tendency of high concentration was found in the order of winter > spring > fall > summer. According to the data matching with the library, the mobile pollutants and open-air incineration had a relatively higher impact on the local air pollution. It is believed that this study, as a pilot study, should focus on securing the reliability of the study results through continuous monitoring and data accumulation.