• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.5
• /
• pp.1929-1950
• /
• 2020

Reliable and secure data transmission in the application environment assisted by the wireless sensor network is one of the major challenges. Problem like blind forwarding and data inaccessibility affect the efficiency of overall infrastructure performance. This paper proposes routing protocol for forwarding and error recovery during packet loss. The same is achieved by energy and hops distance-based formulation of the routing mechanism. The reachability of the intermediate node to the source node is the major factor that helps in improving the lifetime of the network. On the other hand, intelligent hop selection increases the reliability over continuous data transmission. The number of hop count is factor of hop weight and available energy of the node. The comparison over the previous state of the art using QualNet-7.4 network simulator shows the effectiveness of proposed work in terms of overall energy conservation of network and reliable data delivery. The simulation results also show the elimination of blind forwarding and data inaccessibility.

• Proceedings of the IEEK Conference
• /
• summer
• /
• pp.330-333
• /
• 2004

Microsensor nodes is energy limited in sensor networks. If nodes had been stop in working, sensor network can't acquire sensing data in that area as well as routing path though the sensor can't be available. So, it's important to maximize the life of network in sensor network. In this paper, we look at communication protocol, which is modified by LEACH(Low-Energy Adaptive Clustering Hierarchy). We extend LEACH's stochastic cluster-head selection algorithm by a Position-based Selection (PB-Leach). This method is that the sink divides the topology into several areas and cluster head is only one in an area. PB-Leach can prevent that the variance of the number of Cluster-Head is large and Cluster-Heads are concentrated in specific area. Simulation results show that PB-Leach performs better than leach by about 100 to $250\%.$

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.5
• /
• pp.964-973
• /
• 2015

Ship Area Network(SAN) can monitor the status of ship in real time and minimize the maintenance costs by connecting various devices to the network. In particular, among researches on SAN, Wireless Sensor Network using sensor nodes that is low-cost, low-power, and multifunctional has a number of advantages. In this paper, we propose cluster-based multi-channel algorithm considering the energy efficiency in wireless sensor network in a ship. The proposed algorithm shows the result of improvement of throughput and energy efficiency, because it reduces interference between clusters by using channel allocation algorithm that is distributed and dynamic.

• Journal of Information Processing Systems
• /
• v.16 no.4
• /
• pp.743-749
• /
• 2020

Internet of Things (IoT) is a growing technology along with artificial intelligence (AI) technology. Recently, increasing cases of developing knowledge services using information collected from sensor data have been reported. Communication is required to connect the IoT and AI, and 5G mobile networks have been widely spread recently. IoT, AI services, and 5G mobile networks can be configured and used as sensor-mobile edge-server. The sensor does not send data directly to the server. Instead, the sensor sends data to the mobile edge for quick processing. Subsequently, mobile edge enables the immediate processing of data based on AI technology or by sending data to the server for processing. 5G mobile network technology is used for this data transmission. Therefore, this study examines the challenges, opportunities, and solutions used in each type of technology. To this end, this study addresses clustering, Hyperledger Fabric, data, security, machine vision, convolutional neural network, IoT technology, and resource management of 5G mobile networks.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2019.05a
• /
• pp.486-487
• /
• 2019

Smartphones have various sensors built in. In particular, acceleration sensors are used to analyze human behavior because they can detect movement of objects. Previous studies have analyzed the behavior of people by analyzing the magnitude of acceleration sensor values. In this study, we proposed a method of detecting the motion by applying the K-average of the acceleration sensor value built in the smartphone. We proposed a method of recognizing walking and running, which is basic human behavior, by applying K-average of acceleration sensor value of smartphone.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.65-65
• /
• 2002

In remote sensing, images are acquired over the same area by sensors of different spectral ranges (from the visible to the microwave) and/or with different number, position, and width of spectral bands. These images are generally partially redundant, as they represent the same scene, and partially complementary. For many applications of image classification, the information provided by a single sensor is often incomplete or imprecise resulting in misclassification. Fusion with redundant data can draw more consistent inferences for the interpretation of the scene, and can then improve classification accuracy. The common approach to the classification of multisensor data as a data fusion scheme at pixel level is to concatenate the data into one vector as if they were measurements from a single sensor. The multiband data acquired by a single multispectral sensor or by two or more different sensors are not completely independent, and a certain degree of informative overlap may exist between the observation spaces of the different bands. This dependence may make the data less informative and should be properly modeled in the analysis so that its effect can be eliminated. For modeling and eliminating the effect of such dependence, this study employs a strategy using self and conditional information variation measures. The self information variation reflects the self certainty of the individual bands, while the conditional information variation reflects the degree of dependence of the different bands. One data set might be very less reliable than others in the analysis and even exacerbate the classification results. The unreliable data set should be excluded in the analysis. To account for this, the self information variation is utilized to measure the degrees of reliability. The team of positively dependent bands can gather more information jointly than the team of independent ones. But, when bands are negatively dependent, the combined analysis of these bands may give worse information. Using the conditional information variation measure, the multiband data are split into two or more subsets according the dependence between the bands. Each subsets are classified separately, and a data fusion scheme at decision level is applied to integrate the individual classification results. In this study. a two-level algorithm using hierarchical clustering procedure is used for unsupervised image classification. Hierarchical clustering algorithm is based on similarity measures between all pairs of candidates being considered for merging. In the first level, the image is partitioned as any number of regions which are sets of spatially contiguous pixels so that no union of adjacent regions is statistically uniform. The regions resulted from the low level are clustered into a parsimonious number of groups according to their statistical characteristics. The algorithm has been applied to satellite multispectral data and airbone SAR data.

• Journal of KIISE
• /
• v.42 no.3
• /
• pp.399-407
• /
• 2015

Wireless sensor networks are used for data collection and processing from the surrounding environment for various applications. Since wireless sensor nodes operate on low computing power, restrictive battery capacity, and low network bandwidth, their architecture model has greatly affected the performance of applications. If applications have high computation complexity or require the real-time processing, the centralized architecture in wireless sensor networks have a delay in data processing. Otherwise, if applications only performed simple data collection for long period, the distributed architecture wasted battery energy in wireless sensors. In this paper, the energy consumption and processing delay were analyzed in centralized and distributed sensor networks. In addition, we proposed a new hybrid architecture for wireless sensor networks. According to the characteristic of applications, the proposed method had the optimal number of wireless sensors in wireless sensor networks.

• Convergence Security Journal
• /
• v.12 no.6
• /
• pp.25-30
• /
• 2012

As the network composed of numerous sensor nodes, sensor network conducts the function of sensing the surrounding information by sensor and of the sensed information. Our military has also developed ICT(Information and Communication Technology) along with the methods for effective war by sharing smooth information of battlefield resources through network with each object. In this paper, a sensor network is clustered in advance and a cluster header (CH) is elected for clusters. Before deployment, a certificate is provided between the BS and the sensor nodes, and after clustering, authentication is done between the BS and the sensor nodes. Moreover, inter-CH authentication technique is used to allow active response to destruction or replacement of sensor nodes. Also, because authentication is done twice, higher level of security can be provided.

• Journal of KIISE:Computing Practices and Letters
• /
• v.15 no.3
• /
• pp.145-153
• /
• 2009

Trajectory data are ubiquitous in the real world. Recent progress on satellite, sensor, RFID, video, and wireless technologies has made it possible to systematically track object movements and collect huge amounts of trajectory data. Accordingly, there is an ever-increasing interest in performing data analysis over trajectory data. In this paper, we develop a data mining tool for massive trajectory data. This mining tool supports three operations, clustering, classification, and outlier detection, which are the most widely used ones. Trajectory clustering discovers common movement patterns, trajectory classification predicts the class labels of moving objects based on their trajectories, and trajectory outlier detection finds trajectories that are grossly different from or inconsistent with the remaining set of trajectories. The primary advantage of the mining tool is to take advantage of the information of partial trajectories in the process of data mining. The effectiveness of the mining tool is shown using various real trajectory data sets. We believe that we have provided practical software for trajectory data mining which can be used in many real applications.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.4
• /
• pp.86-97
• /
• 2011

This paper presents a novel algorithm to detect more accurate road lane with image sensor-based color classification and directional edge clustering. With treatment of road region and lane as a recognizable color object, the classification of color cues is processed by an iterative optimization of statistical parameters to each color object. These clustered color objects are taken into considerations as initial kernel information for color object detection and recognition. In order to improve the limitation of object classification using the color cues, the directional edge cures within the estimated region of interest in the lane boundary (ROI-LB) are clustered and combined. The results of color classification and directional edge clustering are optimally integrated to obtain the best detection of road lane. The characteristic of the proposed system is to obtain robust result to all real road environments because of using non-parametric approach based only on information of color and edge clustering without a particular mathematical road and lane model. The experimental results to the various real road environments and imaging conditions are presented to evaluate the effectiveness of the proposed method.