Park, Min-Woo;Choi, Chung-Won;Wu, Ming-Gen;Lee, Sang-Hyeob
KOREAN JOURNAL OF CROP SCIENCE
/
v.60
no.1
/
pp.85-90
/
2015
The objective of this study was comparison of seed yields according to different seeding rates, seeding time and application of chemical fertilizations in Yanji region of China. The experiment was conducted on commercial farmland at Yanji region in 2013. All the experimental fields were designed following randomized block design with 3 replicates. The plant spacing was applied as $65{\times}1cm$ distance. To check the effect of seeding rate, two different seeding rate, 0.2 kg/0.1ha and 0.5 kg/0.1ha were applied. The higher seed yield was observed in low seeding rate (0.2 kg/0.1ha). The application of fertilizer (mixture of N and P) showed different results following different experimental fields. However, there were little positive effects following fertilizer application into commercial farmland. When we compare seed yields between two different seeding dates, $4^{th}$ May and $29^{th}$ May, the earlier seeding date ($4^{th}$ May) showed higher seed yields. In considering these results, low seeding rate and early seeding time is important for getting high camelina seed yields.
This study was carried out to develop a vacuum nozzle seeder for the automation of large seeds sowing of fruit vegetables and rootstocks. Moreover, the seeding efficiency was examined to find the optimum operating condition considering high precision seeding. The important operating factors for high seeding rate were typically nozzle diameter and absorbing vacuum pressure. The optimum nozzle diameters were found 1.5, 1.5 and 2.0 mm for Chambak, Tuktozwa and Hukjong while the optimum vacuum pressures were 8.0㎪, 10.6㎪ and 5.3㎪, respectively. Under the optimum operating condition, the results indicated that the maximum seeding rates were 97.6%, 98.8% and 97.6% respectively for Chambak Tuktozwa and Hukjong. The vibrating acceleration of the hopper did not make any significant effects on the seeding rate when the vacuum pressure reached 8.0㎪ and the sowing rate became higher with lighter seed. As the seed became heavier, the larger diameter of nozzle was recommended 1.5mm of the nozzle diameter was found to be applied for the experimental seeds. The vacuum pressure was also found 8.0㎪ - 13.3㎪ at that time.
Journal of The Korean Society of Grassland and Forage Science
/
v.6
no.3
/
pp.164-168
/
1986
This study was conducted at the forage experiment field of SNU, Snweon to investigate effects of sowing time and seeding rate on growth characteristics, winter survival and dry matter yield of forage rye (Secale cereale L.) as fresh-cut forage. Treatments involved 9 combinations of sowing times (September 8, 28 and October 18) and seeding rates(80, 130 and 180kg $ha^{-1}$). Plant height was not influenced by the time of sowing, but forage rye had a tendency to be taller as increasing seeding rate when sown on September 8 and October 28 and harvested in fall and spring, respectively, Winter survival was reduced by fall harvesting in the plot sown on September 8, however, total dry matter yield was increased by the fall harvesting. Average dry matter yields of 5884, 4993 and 3525kg $ha^{-1}$ were obtained when forage rye was sown on September 8, 28 and October 18, respectively. Dry matter yield was decreased as delaying the time of sowing, but a tendency toward higher yield of forage rye by increasing seeding rate was observed. Yield difference by seeding rates was markedly larger when forage rye was sown on October 18 than September 8 and 28. Based on the results of this study, it appears that the dry matter yield of forage rye could be enhanced by sowing early to late September under upland condition in the middle plain are of Korea. The seeding rates of 80 to 130 kg $ha^{-1}$ and 180kg $ha^{-1}$ would be suitable for early to mid fall and late fall sowings, respectively.
Journal of The Korean Society of Grassland and Forage Science
/
v.14
no.4
/
pp.316-323
/
1994
In order to reduce the problems from the presence of rye crop residues in maize establishment and yield, and also to improve the growth, productivity and nutritive value of rye(Seca1e cereal L.). an experiment was canied out to determine the variety effect of rye on the forage production system and the eft'ect of seeding and harvesting dates on the production and quality of rye. 'This experiment was conducted at the forage testing field of S.N.U., Suweon, from September 1986 to May 1989. Heading date of an early maturing rye variety, Wintermore. was earlier 10 days than that of a late maturing rye variety, Kodiak. A 15-days delay in the seeding dates of early and late maturing varieties of rye tended to delay the heading dates of the rye varieties for 3 and 4 days, respectively. Dry matter and in vitro digestible dry matter yields were markedly increased with earlier seeding date. Before 20 April, the DM and IVDDM yeilds of an early maturing rye variety, Winterrnore. were higher than those of a late maturing rye variety, Kodiak. However, no such a trend was found between the early and late maturing varieties of rye after 27 April. Less than 35% of ADF was recorded until the harvesting dates of 13 and 27 p r i l for early and late maturing rye varieties, respectively, but less than 46% of NDF was maintained until the harvesting drtte of 13 April for botg varieties. Based on the results obtained from this experiment. it may be concluded that the most desirable forage production from corn-rye double cropping system is to advance the seeding time of rye toward the first 10 days of September as well as harvesting time toward the first heading stage with an early maturing rye variety.
Journal of the Korean institute of surface engineering
/
v.53
no.5
/
pp.241-248
/
2020
The change of the deposition behavior of diamond through a pretreatment process of the base metal prior to diamond deposition using HFCVD was investigated. To improve the specific surface area of the base material, sanding was performed using sandblasting first, and chemical etching treatment was performed to further improve the uniform specific surface area. Chemical etching was performed by immersing the base material in HCl solutions with various etching time. Thereafter, seeding was performed by immersing the sanded and etched base material in a diamond seeding solution. Diamond deposition according to all pretreatment conditions was performed under the same conditions. Methane was used as the carbon source and hydrogen was used as the reaction gas. The most optimal conditions were found by analyzing the improvement of the specific surface area and uniformity, and the optimal diamond seeding solution concentration and immersion time were also obtained for the diamond particle seeding method. As a result, the sandblasted base material was immersed in 20% HCl for 60 minutes at 100 ℃ and chemically etched, and then immersed in a diamond seeding solution of 5 g/L and seeded using ultrasonic waves for 30 minutes. It was possible to obtain optimized economical diamond film growth rates.
Synthetic and biosynthetic vascular grafts of small diameter have long been considered to be prone to thrombosis, ultimately leading to the complete graft occlusion. Endothelial cell seeding onto synthetic blood-contacting surfaces has been suggested to be an ideal means to solve this problem. This study described a culture method of bovine endothelial cells and evaluated blood-compatibility and seeding efficiency of cultured endothelial cells. Bovine pulmonary artery endothelial cells were harvested enzymatically and grown to confluence on polystyrene culture flask surfaces using established techniques. The identification of endothelial cells was made through the demonstration of expression of factor VIII R:Ag by immunofluorescent technique. To quantitate the effect of improvement in blood-compatibility of viable endothelial cells, endothelial monolayers were exposed to blood containing $\^$111/In-oxine labeled platelets. Viable endothelial monolayers retained less labeled platelets than control surfaces. The Indium-labeled endothelial cells were seeded onto three different blood-contacting surfaces of Dacron vascular graft immobilized in specially equipped wells and incubated for specific time intervals (t=15, 30, 60, 120 minutes). Longer incubation times showed improved cell adherence in collagen-coated and fibrin-coated Dacron vascular graft groups. However in untreated Dacron grafts, no direct relationship was observed between incubation time and endothelial cell seeding efficiency. This may be due to leakage of endothelial cells through porosity of Dacron grafts in this in-vitro experimental condition.
Yun-Kyu Lim;Ki-Ho Chang;Yonghun Ro;Jung Mo Ku;Sanghee Chae;Hae-Jung Koo;Min-Hoo Kim;Dong-Oh Park;Woonseon Jung;Kwangjae Lee;Sun Hee Kim;Joo Wan Cha;Yong Hee Lee
Journal of Environmental Science International
/
v.32
no.12
/
pp.899-914
/
2023
Various seeding materials for cloud seeding are being used, and sodium chloride powder is one of them, which is commonly used. This study analyzed the experimental results of multi-aircraft cloud seeding in connection with Republic of Korea Air Force (CN235) and KMA/NIMS(Korea Meteorological Administration/National Institute of Meteorological Sciences) Atmospheric Research Aircraft. Powdered sodium chloride was used in CN235 for the first time in South Korea. The analysis of the cloud particle size distributions and radar reflectivity before and after cloud seeding showed that the growth efficiency of powdery seeding material in the cloud is slightly higher than that of hygroscopic flare composition in the distribution of number concentrations by cloud aerosol particle diameter (10 ~ 1000 ㎛). Considering the radar reflectivity, precipitation, and numerical model simulation, the enhanced precipitation due to cloud seeding was calculated to be a maximum of 3.7 mm for 6 hours. The simulated seeding effect area was about 3,695 km2, which corresponds to 13,634,550 tons of water. In the precipitation component analysis, as a direct verification method, the ion equivalent concentrations (Na+, Cl-, Ca2+) of the seeding material at the Bukgangneung site were found to be about 1000 times higher than those of other non-affected areas between about 1 and 2 hours after seeding. This study suggests the possibility of continuous multi-aircraft cloud seeding experiments to accumulate and increase the amount of precipitation enhancement.
To investigate the effect of partial tillage seeding of hairy vetch on green manure biomass and rice yield, on-farm experiment was conducted at eco-friendly hairy vetch cultivation area located in Yesan-gun, Chungcheongnam-do. Seeding methods of hairy vetch consisted of partial tillage seeding (PTS) and broadcasting before rice harvesting (BBRH). Hairy vetch was incorporated into soil on May 18 and rice seedling was transplanted on May 26. The growths of hairy vetch before overwintering were investigated on November 11. Plant height of BBRH plot was longer than that of PTS plot, but somewhat larger number of seedling stand was found in PTS. Biomass and N production of hairy vetch were investigated on May 18. Results of the investigation showed no difference between two seeding methods. Although the seeding time was 21 days late in PTS, the biomass of hairy vetch and rice yield were equivalent to those of BBRH seeding, so we conclude that PTS could improve overwintering survival of hairy vetch in rice cropping system.
Proceedings of the Korean Society of Crop Science Conference
/
2017.06a
/
pp.258-258
/
2017
We received 73 wheat resources from CIMMYT for analysis of agricultural characteristics and qualities of them. We sowed 73 lines and 4 Korean varieties in fall and spring to compare differences of wheat traits between fall and spring seeding. The heading and maturity date of fall seeding lines has coming faster average 18 days than spring seeding lines. Fall seeding lines have more number of spike per $m^2$ and grain number of spike. Spike and awn length of spring seeding lines were shorter than fall seeding lines and stem length was variable to varieties in both condition. Protein contents of five of 73 lines, Jokyoung and Jopoom varieties decreased but the others increased. The sedimentation values of 34 lines include Jokyoung and falling number (F/N) of 44 lines include two varieties, Keumkang and Jokyoung, decreased but the others increased, respectively. Particle size was presented that most spring seeding lines were bigger. However, when it sowed in fall, the lightness (L) of wheat flour was lighter. Consequently, we confirmed when it was sowed in spring, agricultural traits and qualities of wheat got weak.
Park, T.S.;Park, J.E.;Lee, I.Y.;Lim, E.S.;Kim, Y.K.
Korean Journal of Weed Science
/
v.17
no.2
/
pp.169-175
/
1997
The effect of different cultural patterns on the growth and herbicidal response of rice(Oryza sativa L.) and barnyardgrass(Echinochloa crus-galli var. oryzicola) was studied tinder direct-seeded rice and early rice seedling conditions. In dry-seeded rice condition, the growth of rice and barnyardgrass was the greatest in 3cm-seeding depth and 40% soil moisture, respectively. At 10 days after herbicide application, plant height of rice was severely inhibited in 1cm-seeding depth and 50% soil moisture, and the degree of inhibition was severer at application of pendi+molinate EC as compared to that of butachlor EC. On the other hand, plant heigth of barnyardgrass by treatment of herbicides was severely reduced regardless of seeding depth and soil moisture. The lengths of barnyardgrass mesocotyl and rice coleoptile were increased with increasing seeding depth and were severely inhibited by applied herbicides in 1cm-seeding depth under dry-seeded rice condition. The dry weight of rice at different leaching times after herbicides application showed slightly decreasing trend as the leaching time was delayed, but the growth of barnyardgrass was very severely inhibited regardless of the leaching time. In addition, the phytotoxicity of rice showed decreasing trend with the increase in transplanting depth and delay of application time under early rice seedling condition.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.