An impact-type seed-metering device was developed for the planting of rice-pellets. In this study, new design of pellet-metering device focused on simplicity and precision seeding for the planting of rice-seed pellets. In addition of seed-metering device, several devices were also developed such as seed-guiding device, seed-supplying tube and furrow opener for precision pellet planting. Field test was conducted to estimate the planting performance of the developed metering device. As a cam rotates, the impact bar of the metering device pushes a rice-seed pellet so that the seed can be discharged from the seed-supplying tube in the impact-type seed-metering device. Results of the tests showed that mean seeding spacing was 12cm at the traveling speed of 1.0m/s, corresponding to a target spacing for planting of rice-seed pellets. Also, both miss-seeded rate and damaged-seed rate were less than 2.0%, indicating acceptable levels for the precision planting. The developed mechanism of the impact-type metering device can be directly applied to the design of metering devices for the precision pellet planting of other crops.
In order to save labor and cost, direct seeding has been considered as an important alternative to the machine transplanting in rice cultivation. As current seeders for direct seeding of rice seeds drill irregular amount of seeds under various operating conditions, conventional drilling should be turned to precision planting which enables accurate placement of proper amount of rice seeds at equal intervals within rows. In this study, design, construction and performance evaluation of a precision seed metering device for planting of rice seeds were carried out. As prototype, the conventional roller type seed metering device was modified for planting: increasing diameter of metering roller, setting 2 or 4 seed cells on metering roller, adding seed discharging lid and its driving cam mechanism. Through performance tests for prototype and the current seed metering device, number of seeds in a hill, planting space and its error ratio, coefficient of variation of planting space (planting accuracy), and seeding length of $90\%$ of seeds in a hill divided by planting space (planting precision) at setting planting spaces of 15, and 20cm, seeding heights of 10, and 20cm, and seeding speeds of 0.1, 0.2, and 0.5m/s were investigated. Prototype showed better seed planting performance than the current seed metering devices. When setting planting space of 15 cm and seeding height of 10cm, prototype with 2 seed cells showed that variations of planting space and seeding lengths of $90\%$ of seeds in a hill at up to seeding speed of 0.5m/s were within 0.9cm, and 3.6cm, respectively.
To find out the effects of seed maturity and seeding rate of two planting times on the seed emergence and silage and seed yields of rye, a local variety 'Paldanghomir' harvested 30 and 45 days after heading(DAH) were planted at five seeding rates on October(optimum) and November(late) in 1985. At the optimum planting, number of seedlings per unit area and number of tillers per plant were affected by seeding rate, but not by the seed maturities. However, at the late planting, number of seedlings per unit area and number of tillers per plant wer higher in the seed harvested 45 DAH, and they were not correlated with seeding rate in both seeds harvested 30 and 45 DAH. Heading date was 2 or 3 days earlier in the seeds harvested 45 DAH in both planting times. Silage yield was higher at the optimum planting and increased as seeding rate increased in both planting times. Number of spike and 1000~seed weight were higher at the optimum planting than late planting and higher in the seed harvested 45 DAH than 30 DAH in late planting, but were not different among seeding rates. Seed yield at optimum planting showed no difference between seed maturities and among seeding rates, and recommandable seeding rate was 600 seeds per $m^2$. At late planting the seed yield of the seed harvested 45 DAH in the seeding rate over 750 seeds per $m^2$ approached to the yield of the optimum planting. The seed harvested 30 DAH was unstable because of extremely low emergence rate and yield even at the higher seeding rate in late planting. planting.
Journal of the Korean Institute of Landscape Architecture
/
v.27
no.2
/
pp.51-57
/
1999
Planting methods of seeding, seed net, sprig net and sprigging were evaluated for influence on the covering rate and the growth of Phragmites spp. The results were as follows. 1. Covering rate was high within 4 months when propagated by sprig net, seeding and sprigging but became same within 5 months afterwards regardless of Planting methods. 2. Growth of leaf height and width was high on vegetative types of Planting methods such as sprig net and sprigging when compared with on seed types of Planting methods such as seeding and seed net. 3. Sprig net showed good covering rate and growth than sprigging when compared within vegetative types of planting. 4. In this study, sprig net was figured out as the best type of Planting methods than any other types of Planting methods for the restoration of a shore vegetation in a urban stream.
This investigation was conducted to determine the effect of the optimum planting date and place for good seed production on growth variation, grain yields, different of variety, infection of seed by fungi, and seed germination and vigor after room storage. Early maturity Korean soybean variety, Keunolkong, and introduced vegetable soybean variety, Fukura-edamame, were planted at field of YAES. and high cool land of Sajapyong in Milyang(altitude, 850m) on May 15 (early), June 15 (mid.), and July 15 (late) in 1991. The emergence and vegetative period gradually increased in the early planting date. The grain yield, seed weight, pod number, healthy grain yield also increased when Keunolkong was planted on early date. The healthy seed rate, Keunolkong increased in the early planting date, whereas that of Fukura also increased in the late planting date. Infection ratio of grain to phomopsis seed decay (Phomopsis spp. ' Diaporthe phaseolorum) in Fukura steadily increased in the early planting date. Infection ratio of grain to purple seed stain (Cercospora kikuchii) generally increased in the mid and late planting date. The seed germination and seedling vigor after room storage from five to six months gradually increased in the late planting date. And seed germination of Fukura rapidly decreased in the early planting date. Therefore, the optimum planting date for good seed production in early maturity vegetable soybean was June 15 in terms of harvesting time avoid a high temprature and humidity.
This experiment was conducted to investigate the changes of harvest index and the relationship between harvest index and yield determination factors by different planting times in the determinate soybean cultivars, Shinpaldal and Danbaeg. Optimum planting were 23 May in 1995 and 1996. Late planting were 13 June in 1995 and 6 June in 1996. Growth period from planting to physiological maturity (R7) was shortened as planting time was delayed in two cultivars due to shortening of reproductive growth period in Shinpaldal, and of vegetative growth period in Danbaeg. Stem weight was distinctly decreased in late planting compared to optimum planting, but seed weight of both cultivars was not different between planting times. Also, seed number per pod and harvest index were significantly increased in late planting and the high correlation was found between two factors. It was suggested that increase of harvest index in late planting would be related with high assimilate use efficiency due to increase of sink capacity. The results of correlation and principal component analysis for yield determination factors showed that main factor on yield determination was pod number per plant at R5 stage associated with dry matter accumulation during early reproductive growth period, seed number per pod and harvest index were the second factor, and one hundred seed weight was the third factor. The result of this experiment indicated that yield determination in soy-bean was dependent mainly on pod number per plant related to dry matter accumulation by early reproductive growth period, and the increase of seed number per pod and harvest index could compensate for yield decrease by shortening of vegetative growth period in late planting. Such result suggests that optimum planting date can be delayed from mid May to early June in improved soybean cultivars in Korea.
Two determinate soybean cultivars, 'Baegunkong' and 'Namhaekong', were planted on 8 Jone, 23 June, and 8 July 1996 at Cheju at planting densities of 33, 43, 53, 63 plants per $m^2$ to determine the optimum planting density of double crop soybean for recently recommended cultivars in Cheju area at various planting dates. The plant height, and the diameter and node number of main stems decreased as planting was delayed. The plant height increased but the stem diameter and node number decreased with increasing planting density. Pod number per plant was greater for Namhaekong than for Baegunkong and was not affected by planting date. Pod number per plant decreased but pod numbers per $\textrm{m}^2$ increased with increasing planting density. The number of seeds per pod was greater at the two later plantings and fewer at the highest planting density. 100-seed weight decreased with delaying planting. The seed weight was lighter at the highest planting density for Baegunkong but there was no difference for Namhaekong among the planting densities. The seed yield of Baegunkong was greater for 23 June and 8 July plantings (2,280 and 2,420 kg/ha) than for 8 June planting (1,450 kg/ha) while that of Namhaekong was greatest at 23 June planting (2,690 kg/ha) compared with 8 June and 8 July plantings (1,890 and 2,080 kg/ha). Across the planting dates and cultivars, seed yield increased from 1,860 to 2,290kg/ha as the planting density increased from 33 to 53 plants/$\textrm{m}^2$ and then leveled off with a further increase in planting density.
It is one of the important subjects in fall crop production of potatoes in korea to find the proper direct planting method as a substitute for transplanting method by sprouting inducement at seed-bed. From this point the author has undertaken this experiments to examine the effects of several handling methods of seed tuber pieces at planting on sprouting of fall grown potatoes at Ansung Agricultural College from August to september in 1969. The results of experiments induced sprouting with Gibberellin treatment using the variety Irish Cobbler were as follows; 1. Sun light exposure treatment to cut surface of potato seed pieces resulted in rotting of seed pieces and delay of sprouting and bud growth. Exposure more than three hours induced severe rotting(more than fifty percent) of seed pieces (Table I). 2. When soil moisture are abundant and the duration of sun light. exposure is short, even direct planting method of treated seed pieces with Gibberellin resulted in good potato stands (Table 2). 3. The direct planting method, as the rotting of seed pieces are avoidable are applicable in fall crop production of potatoes us a substitute for transplanting method because the sprouting and bud growth are promoted more in case of direct planting than transplanting (Table 3). 4. When the humidity in the bottle was low no healing effects was found by holding the seed pieces in large closed bottle under the trees for three days before planting (Table 2). 5. If duration of sunlight exposure is short, no difference of potato stands between clear day planting and cloudy day plant ing (Table 3). 6. As long as soil moisture deficiency. was not induced the irrigation at planting shows no effects to protect the seed piece rotting after planting (Table 3).
Proceedings of the Korean Society for Agricultural Machinery Conference
/
1993.10a
/
pp.761-767
/
1993
A precision planting system using computer controlled technology for mulching cultivation was developed and tested . The system consisting of a micro-computer, several optical fiber sensors and control actuators realized the mechanization of the precision planting operation. The film hole positions, existences of a seed on shutter were detected and the planting speed was measured. The shutter opening mechanism and a seed metering device driven by a stepping motor were controlled, automatically . The planting timing of the shutter opening mechanism were analyzed from a video camera motion analysis, theoretically. The results showed a sufficient accuracy of a seed planted into the center a film hole with a variety of planting speeded. The gravity point positions in film hole of seeds planted by the system just were within the area of +-5mm of the hole center when the hole diameter was 40mm.
Park, Yang-Mun;Song, Chang-Khil;Kang, Bong-Kyoon;Kim, Dong-Woo;Ko, Dong-Hwan
KOREAN JOURNAL OF CROP SCIENCE
/
v.44
no.3
/
pp.201-206
/
1999
For the mass production of plug seedlings in cultivar ‘Dejima’ potato (Solanum tuberosum L.) the optimal apical cutting diameter for rooting and rapid multiplication of stem cuttings in hydroponics were determined. In addition, the best planting date was predicted to increase tuber yield of plug seedlings at fall cropping in Cheju-Do, Korea. Days to initial rooting decreased as the cutting diameter was reduced. Plant height, leaf number, root length and root weight per plant were favorable as the cutting diameter was small. The ideal cutting diameter was 1-2 mm in this experiment. In the hydroponic cultures, the Japanese standard (JS) nutrient solution was the most effective for multiplication of stem cuttings. It was able to propagate more than 20 times a month from a single mother plant. Viability of plants, which were derived from plug seedlings using stem cuttings, was excellent when transplanted to the field. The number of tubers and tuber yield in both of the plug seedlings and seed potato planting plots were high when planted on 25 August. The number and yield were reduced when planted on 15 August, 5 September and 15 September. The degree of decrease of tuber yield in the plug seedling planting plot however, was lower than that of seed potatoes when the planting date was late. In the case of small tubers (under 30 g), the number of tubers and tuber yield were evidently increased in the seed potato tuber planting plot; the yield of large tuber (over 80g) in the plug seedling planting plot was higher than that of the seed potato. The total tuber yield per plant in the plug seedling planting plot was less than that of the seed potato; therefore, in order to increase tuber yield it was necessary to increase field plant density.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.