• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1287-1288
• /
• 2008

In the past work, we showed that $Ge_1Se_1Te_2$ thin films provide a promising alternative for PRAM applications to overcome the problems of conventional $Ge_2Sb_2Te_5$ PRAM devices. However, $Ge_1Se_1Te_2$ thin films were unstable at SET and RESET process. Because of unstable state and its melting temperature, we alloyed As for 5wt%, 10wt% and 15wt% respectively. The phase transition temperature of $Ge_1Se_1Te_2$-only thin film is found to be 213$^{\circ}C$ while As 10wt% alloyed $Ge_1Se_1Te_2$ showed phase transition at 242$^{\circ}C$ with more stability.

• Korean Journal of Optics and Photonics
• /
• v.8 no.6
• /
• pp.445-449
• /
• 1997

The complex refractive indices of $Ge_2Se_2Te_5$ which show reversible phase change between the crystalline phase and an amorphous one depending upon the annealing process have been determined in the spectral range of 0.7-4.5 eV. The $Ge_2Se_2Te_5$ films were DC sputter deposited on the crystalline silicon substrate. The spectro-ellipsometry data of a thick film were analyzed following the modelling procedure where the quantum mechanical dispersion relation were used for the complex refractive indices of both the cryastalline phase $Ge_2Se_2Te_5$ and and amorphous phase $Ge_2Se_2Te_5$, respectively. On the other hand, with the surface micro-roughness layer whose effective thickness was determined from AFM analysis, the spectro-ellipsometry data were numerically inverted to yield the complex refractive index of $Ge_2Se_2Te_5$ at each wavelength. With these set of complex refractive indices, the reflectance spectra were calculated and those spectra obtained from the numerical inversion showed better agreement with the experimental reflection spectra for both the cryastalline phase and an amorphous phase. Finally, the thin $Ge_2Se_2Te_5$ film which has the optimum thickness of 26 nm as the medium for optical recording was also analyzed and the quantitative result of the film thickness and the surface microroughness has been reported.

• Bulletin of the Korea Photovoltaic Society
• /
• v.9 no.2
• /
• pp.18-28
• /
• 2023

지구상에 풍부하며 저독성 소재인 안티모니 셀레나이드(Sb₂Se₃)는 재료가 갖는 우수한 광전자적 특성과 장기 내구성으로 차세대 태양전지 소자로 크게 주목 받고 있다. 또한, 비교적 짧은 연구기간 동안 빠른 성장 속도를 보여줬으며, 2014년 2.26%에서 8년의 연구기간 동안 약 5배인 2022년 10.57%를 달성하였다. 하지만, 여전히 기존의 칼코지나이드계 박막 태양전지인 CdTe(22.1%) 및 Cu(In,Ga)Se₂(23.35%)가 달성한 효율에 비해 낮은 변환 효율을 보이고 있으며, 이는 계면에서 발생하는 캐리어 재결합으로 인한 개방전압 손실 문제가 주 원인으로 대두되고 있다. 따라서, Sb₂Se₃ 광 흡수층에 인접한 전자 및 정공 수송층 사이에 적절한 밴드 정렬을 구축하여 캐리어 재결합 손실을 줄이는 것이 고효율 Sb₂Se₃ 태양전지를 구현하기 위한 핵심 전략 중 하나이다. 본 원고에서는 Sb₂Se₃ 광 흡수층의 기본적인 특성과 Sb₂Se₃ 태양전지의 최근 연구 성과에 대해 간략하게 설명하고자 하며, 특히 전자 및 정공 수송층 적용을 통한 에너지 밴드 정렬 최적화에 관련된 내용을 중점적으로 소개하고자 한다. 또한, Sb₂Se₃ 박막 태양전지 성능의 병목 현상을 극복하기 위한 잠재적인 연구 방향에 대해서도 논하고자 한다.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1285-1286
• /
• 2008

A detailed investigation and structure of tested samples are clearly presented. As a reference, $Ge_1Se_1Te_2/As$ only sample was also investigated. We used compound of Ge-Se-Te material for phase-change cell. Actually, the performance properties have been improved surprisingly then conventional Ge-Sb-Te. However, crystallization time was as long as ever for amorphization time. We conducted this experiment in order to solve that problem by doping-As with Ag layer.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.191-192
• /
• 2008

For phase transition method, good record sensitivity, low heat radiation, fast crystallization and hi-resolution are essential. Also, a retention time is very important part for phase-transition. In our past papers, we chose composition of $Ge_1Se_1Te_2$ material to use a Se factor which has good optical sensitivity than conventional Sb. Ge-Se-Te and Ag/$Ge_1Se_1Te_2$ samples are fabricated and irradiated with He-Ne laser and DPSS laser to investigate a reversible phase change by light. Because of Ag ions, the Ag layer inserted sample showed better performance than conventional one. We should note that this novel one showed another possibility for phase-change random access memory.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.57-57
• /
• 2010

In this study, nano-sized phase change materials were evaluated using nanoimprint lithography and c-AFM technique. The 200nm in diameter phase change nano-pillar device of GeSbTe, AgInSbTe, InSe, GeTe, GeSb were successfully fabricated using nanoimprint lithography. And the electrical properties of the phase change nano-pillar device were evaluated using c-AFM with pulse generator and voltage source.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.15-16
• /
• 2005

Chalcogenide phase change memory has high performance to be next generation memory, because it is a nonvolatile memory processing high programming speed, low programming voltage, high sensing margin, low consumption and long cycle duration. We have developed a new material of PRAM with $Ge_1Se_1Te_2$. This material has been propose to solve the high energy consumption and high programming current. We have investigated the phase transition behaviors in function of various process factor including contact size, cell size, and annealing time. As a result, we have observed that programming voltage and writing current of $Ge_1Se_1Te_2$ are more improved than $Ge_2Sb_2Te_5$ material.

• Electrical & Electronic Materials
• /
• v.9 no.1
• /
• pp.67-75
• /
• 1996

This paper has presented the characteristics of thermoelectric devices and the plots of thermoelectric cooling and heating as a function of currents for different temperatures. The maximum cooling and heating(.DELTA.T) for (BiSb)$\_$2/Te$\_$3/ and Bi$\_$2/(TeSe)$\_$3/ as a function of currents is about 75.deg. C, A solderable ceramic insulated thermoelectric module. Each module contains 31 thermoelectric devices. Thermoelectric material is a quaternary alloy of bismuth, tellurium, selenium, and antimony with small amounts of suitable dopants, carefully processed to produce an oriented polycrystalline ingot with superior anisotropic thermoelectric properties. Metallized ceramic plates afford maximum electrical insulation and thermal conduction. Operating temperature range is from -156.deg. C to +104.deg. C. The amount of Peltier cooling is directly proportional to the current through the sample, and the temperature gradient at the thermoelectric materials junctions will depend on the system geometry.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.25 no.4
• /
• pp.422-429
• /
• 1988

The photoconductive multilayer of Se-As(hole blocking layer)/Se-As-Te (photoconductive layer) /Se-As (layer for supporiting hole transport)/Se-As(layer or controlling total capacitance)/Sb2S3(electron blocking layer) was fabricated and its electrical and optical properties were investigated. The photoconductive multilayer is made of evaporated a-Se as the base material, doped with As and Te to prevent the crystallization of a-Se and to enhance red sensitivity, respectively. The multilayer with good image reproducibility has the following deposition condition. The first layer has the thickness of 250\ulcornerat the deposition rate of 250\ulcornersec. The second layer has the thickness of 800\ulcornerat the deposition rate of 250\ulcornersec. The third layer has the thickness of 125\ulcornerat the deposition rate of 250\ulcornersec. The fourth layer has the thickness of 1700\ulcornerunder the Ar gas ambient of 50x10**-3torr. The image pick-up tube, employing this multilayer demonstrates the following characteristics. The photosensitivity is 0.8, the resolution limit is above 300TV line, and the decay lag is about 7%. And spectral response convers the whole visible range. Therfore the application to color TV camera is expected.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2007.11a
• /
• pp.56.2-56.2
• /
• 2007