• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.2
• /
• pp.94-103
• /
• 1994

In testing for practical scan disigned logic circuits, there may exist logic value constraints on some part of primary inputs due to various requirements on design and test. This paper presents a logic value system called taboo logic values which targets the test pattern generation of logic circuits under logic value constraints. The taboo logic system represents the logic value constraints and identifies additional logic value constraints through the implication of the tqaboo logic values using a taboo logic calculus. Those identified logic value constraints will guide the search during the test pattern generation of avoid the unfruitful searches and to identify redundant faults due to the logic value constraints very quickly. Finally, experimental results on ISCAS85 benchmark circuits will demonstrate the efficiency of the taboo logic values.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1957-1958
• /
• 2008

The Logic Built In Self Test (LBIST) technique is substantially applied in chip design in most many semiconductor company in despite of unavoidable overhead like an increase in dimension and time delay occurred as it used. Currently common LBIST software uses the MISR (Multiple Input Shift Register) However, it has many considerations like defining the X-value (Unknown Value), length and number of Scan Chain, Scan Chain and so on for analysis of result occurred in the process. So, to solve these problems, common LBIST software provides the solution method automated. Nevertheless, these problems haven't been solved automatically by Tri-state Bus in logic circuit yet. This paper studies the simulator and algorithm that judges whether Tri-state Bus lines is the circuit which have X-value or One-hot Value after presuming the control signal of the lines which output X-value in the logic circuit to solve the most serious problems.

• Proceedings of the Korean Information Science Society Conference
• /
• 1998.10c
• /
• pp.662-664
• /
• 1998

IEEE 1149.1 바운다리스캔은 보드 수준에서 고장점검 및 진단을 위한 테스트 설계기술이다. 그러나, 바운다리스캔 제어기의 특성상 테스트 패턴의 주입에서 관측까지 2.5 TCK가 소요되므로, 연결선상의 지연고장을 점검할 수 없다. 본 논문에서는 Update_DR 신호를 변경하여, 테스트 패턴 주입에서 관측까지 1 TCK가 소요되게 함으로써, 지연고장 점검을 가능하게 하는 기술을 소개한다. 나아가서, 정적인 고장점검을 위한 테스트 패턴을 개선해 지연고장 점검까지 가능하게 하는, N개의 net에 대한 2log(N+2)의 새로운 테스트패턴도 제안한다. 설계와 시뮬레이션을 통해 지연고장 점검이 가능함을 확인하였다.

• Laser Solutions
• /
• v.18 no.3
• /
• pp.6-8
• /
• 2015

Finishing process includes deburring, polishing and edge radiusing. It improves the surface profile of specimen and eliminates the alien substance on surface. Deburring is the elimination process for debris of edges. Polishing lubricates surfaces by rubbing or chemical treatment. There are two types for electron finishing. The one is using pulse beam. The other is using the convergent and scanning electron beam. Pulse type device appropriates the large area process. But it does not control the beam dosage. Scanning type device has advantages for dosage control and edge deburring. We design the convergence and scan type. It has magnetic lenses for convergence and scan device for scanning beam. Magnetic lenses consist of convergent and objective lens. The lenses are designed by the specification(beam size and working distance). In this paper, we evaluate the convergence performance by pattern process. Also, we analysis the results and important factors for process. The important factors for process are beam size, pressure, stage speed and vacuum. These results will be utilized into systematizing pattern shape and the factors.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.3C no.5
• /
• pp.194-198
• /
• 2003

A wide-band E-plane notch phased array antenna having bandwidths of 3:1 and a scan volume of $\pm$ 45 is designed considering the active element pattern (AEP) with analysis of the full structure of E-plane notch phased array antenna. Using the numerical E-plane waveguide simulator as an infinite linear array in the broadside angle, the active reflection coefficient (ARC) of the unit element is optimized in the design frequency range. To evaluate the convergence of the AEP, the simulation of full array as changing the number array is investigated, and the minimum numbers of array that have characteristics similar to the AEP of an infinite array are determined.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.179-182
• /
• 2017

Cerebral nervous system intervention procedures have been reported frequently due to radiation exposure such as skin baldness, hair loss, and redness due to prolonged procedures. Therefore, the bismuth shield designed to reduce the radiation exposure of the target organ located in the anterior part of the human body sensitive to skin and radiation sensitivity during CT (computed tomography) scan is applied to the cerebral vascular system intervention by ergonomic design, To reduce the radiation dose of sensitive scalp, we propose a study.

• The Journal of the Korean dental association
• /
• v.57 no.7
• /
• pp.380-391
• /
• 2019

In recent years, with the introduction of various restorative materials, restorations using CAD/CAM equipment have been increasing in the esthetic dentistry. The critical steps in the fabrication of indirect restorations with CAD/CAM equipment are proper cavity preparation and making accurate impressions. The process of tooth preparation for CAD/CAM restoration should include a mechanical understanding of milling. In addition, during tooth preparation, the clinician should be familiar with additional equipment and techniques for obtaining the convenience. In order to obtain an accurate oral scan, the clinician should understand the limitations of the oral scan and be skilled at techniques for obtaining a successful image when making oral scans. This article focused clinical guidelines for the preparation of CAD/CAM restorations and introduced clinical methods for making successful impression of oral scans in narrow and deep tooth cavity areas.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.1
• /
• pp.74-79
• /
• 2021

In this paper, the 3D shape of a hydraulic actuator cover was 3D printed by applying two materials, namely PLA and ABS. Subsequently, the printed shape was scanned to analyze the material properties, dimensional change characteristics, dimensions, and scan shape as a real model. To compare and analyze material-specific 3D printing dimensions, a non-contact mobile laser scanner was used to scan a portion of the printed hydraulic actuator cover and the final alignment shape of the 3D printed part was studied on the basis of the design model.

• Journal of Acupuncture Research
• /
• v.18 no.4
• /
• pp.1-12
• /
• 2001

Study design : A retrospective study of lumbar disc herniations using results of follow-up computed tomographic scan examinations. Objective : Lumbar disc herniations is one of the cause low back pain and lower extremity pain. To clarify the lumbar disc herniations morphological changes over time(mean 5.3 years) in order to establish a strategy for treatment. Methods : Sixteen patients with lumbar disc herniations who underwent follow-up computed tomographic scan examinations were studied. The changes over time in herniated disc size(herniation ratio) were evaluated using this scan technique. The initial computed tomographic scan allowed classification of the herniations according to herniation ratio: small, medium and large. Results : Comparison with follow-up computed tomographic scans showed that of the 16 patients, in 14 patients(88%), the herniation ratio(HR) was decreased and among them, 8 patients had complet resolution of herniated disc. In 2 patients with small herniations, the HR of one case was increased, the other was decreased. In 8 patients with medium herniations, the HR of one case had no change, the others was decreased. In 6 patients with large herniation, the HR of all patients was decreased. Interestingly, 4 of the 16 patients showed calcification change of herniated disc. Conclusion : There is no doubt that herniated disc size is decreased over time. The largest herniations were those which had the greatest tendency to decrease in size. But in some cases, the HR was increased, or calcification change was showed.

• Korean Journal of Optics and Photonics
• /
• v.11 no.2
• /
• pp.73-79
• /
• 2000

We measure a beam diameter of scan and sub-scan direction of LSD (Laser Scanning Urnt) which uses $fheta$ lens produced by injecLion molding method as a scanning lens. While the measured beam diameter in scan direction, which is $62muextrm{m}$ to $68\mu\textrm{m}$, shows similar size comparing to the design beam diameter, the sub-scan beam diameter shows sIzable beam diameter deviation as much as 37 11m ranging from $78\mu\textrm{m}$ to $115\mu\textrm{m}$. Injection molding lens has the surface figure error due to the shrinkage III the cooling time and the internal distortion (birefringence) due to the uneven cooling conditIOn so that these bring about wavefront aberration (i.e., the enlargement of beam size), and are eventually expre~sed as the deterioration of the pdnting image. In this paper. we first measure and analyze beam diameter, birefringence (polanzation ratio), and asphedcal figure error of mIens in order to know the principle cause of the beam diameter deviation in sub-scan directIOn. And Lhen. through the analysis of a designed depth of focus and a calculated field curvature (imaging position of the optical axis directIon) using the above figure elTor data, we know Lhat the birefringence IS the main factor of sizable beam diameter deVIation in sub-scan direction. ction.