Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지
DOI QR코드

DOI QR Code

Dimensional Characteristics of Hydraulic Actuator Curve based on 3D Printing Filament Materials

3D 프린팅 필라멘트 재료에 따른 유압액츄에이터 커브의 치수 특성

  • Jung, Myung-Hwi (School of Automotive Engineering, Gyeongnam National University of Science and Technology) ;
  • Kong, Jeong-Ri (Department of Robot Mechanics, Robot Campusof Korea Polytechnic) ;
  • Kim, Hae-Ji (Department of Automotive Engineering, Gyeongnam National University of Science and Technology)
  • 정명휘 (경남과학기술대학교 자동차공학과 대학원) ;
  • 공정리 (한국폴리텍대학 로봇캠퍼스 로봇기계과) ;
  • 김해지 (경남과학기술대학교 자동차공학과)
  • Received : 2020.11.02
  • Accepted : 2020.11.30
  • Published : 2021.01.31
Download PDF
⟨ Previous Next ⟩

Abstract

In this paper, the 3D shape of a hydraulic actuator cover was 3D printed by applying two materials, namely PLA and ABS. Subsequently, the printed shape was scanned to analyze the material properties, dimensional change characteristics, dimensions, and scan shape as a real model. To compare and analyze material-specific 3D printing dimensions, a non-contact mobile laser scanner was used to scan a portion of the printed hydraulic actuator cover and the final alignment shape of the 3D printed part was studied on the basis of the design model.

Keywords

References

  1. Kim, H. J., "3D Printing Characteristics of Automotive Hub using 3D Scanner and Reverse Engineering", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 18, No. 10, pp. 104-109, 2019.
  2. Lee, C. H., "Inspection of Composite Working Implement of Tractor using 3D Scanning and Reverse Design", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 16, No. 3, pp. 45-53, 2017. https://doi.org/10.14775/ksmpe.2017.16.3.045
  3. You, D. H., "Optimal Printing Conditions of PLA Printing Material for 3D Printer", The transactions of The Korean Institute of Electrical Engineers, Vol. 65, No. 5, pp. 825-830, 2016. https://doi.org/10.5370/KIEE.2016.65.5.825
  4. Goo, S. K., "Study of non-assembled hinge design without support for FDM 3D printer content development", Journal of Digital Contents Society, Vol. 19, No. 10, pp. 1843-1851, 2018. https://doi.org/10.9728/dcs.2018.19.10.1843
  5. Kang, Y. G., Kweon, H. K. and Shin, G. S., "Strength Variation with Inter-Layer Fill Factor of FDM 3D Printer", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 18, No. 3, pp. 66-73, 2019.
  6. Won, S. H., "Test of Prototype Motor Characteristics using Magnetic Filament of 3D Printer", The Transaction of The Korean Institute of Electrical Engineers P, Vol. 69, No. 3, pp. 200-205, 2020. https://doi.org/10.5370/KIEEP.2020.69.3.200
  7. Jung, H. S., Park, S. J. and Yoo, J. H., "Analysis of Master Dimensional Shape Error Rate According to Reverse Engineering Technique", Journal of the Korean Society of Manufacturing Technology Engineers, Vol. 25, No. 5, pp. 393-399, 2016. https://doi.org/10.7735/ksmte.2016.25.5.393
  8. Eom, S. H., Park, J. J., Jin, J. H. and Son, Y., "Feasibility Study on Dimensional Standard for Material Extrusion Type 3D Printed Structures", Journal of the Korean Society for Precision Engineering, Vol. 37, No. 4, pp. 241-246, 2020. https://doi.org/10.7736/JKSPE.019.118
  9. Thompson, M. K., Moroni, G., Vaneker, T., Fadel, G., Campbell, R. I., et al., "Design for Additive Manufacturing: Trends,Opportunities, Considerations, and Constraints", CIRP Annals, Vol. 65, No. 2, pp. 737-760, 2016. https://doi.org/10.1016/j.cirp.2016.05.004
  10. Adam, G. A. and Zimmer, D., "Design for Additive Manufacturing-Element Transitions and Aggregated Structures", CIRP Journal of Manufacturing Science and Technology, Vol. 7, No. 1, pp. 20-28, 2014. https://doi.org/10.1016/j.cirpj.2013.10.001
  11. Choi, S., Bae, Y., Lee, I., and Kim, H., "Latest Research Trends of 3D Printing in Korea", Journal of the Korean Society for Precision Engineering, Vol. 35, No. 9, pp. 829-834, 2018. https://doi.org/10.7736/kspe.2018.35.9.829