• Journal of Korean society of Dental Hygiene
• /
• v.8 no.4
• /
• pp.1-10
• /
• 2008

The purpose of this study was to compare the oral health status of elderly people living in nursing home with private home in Busan, Kimhae and Jinju in Gyeongnam province for development oral healthy policy of elderly people. 253 elderly subjects aged more than 65 in a hall for the aged and special medical treatment hospital are made up questions. The date was analysed using the SPSS 13.0 program. The obtained result were as follows. 1. 39.5 percent elder people recognize that their subjective oral health is not good. In the case of above three times in brushing tooth a day, 29 percent people are less their oral health is good. As the number of times of brushing tooth decreases, the percent feeling their oral status good decrease(p<.05). 2. The respondents who have visited the dentist within one year are less than people with no visit. Also the percent having a mind that their oral health status is good is higher in the respondents having scaling than them without scaling(p<.05). The respondents who answer that their diet is not bad is most in the ratio of people feeling subjective oral health status good(p<.001). 3. The portion of people feeling their oral status not healthy is highest in the respondents without tooth(p<.05). 4. Among the respondents answering their subjective oral health is not good, the some problem of conversation due to no tooth or denture and relation with others is issued each(p<.001). This study suggests that perceived toothbrusing frequency and periodic scaling with oral health among the elderly. The finding of this study will helpful to policy makers to design plants to increase the oral health related quality of life among the elderly.

• Journal of Korean society of Dental Hygiene
• /
• v.13 no.3
• /
• pp.387-393
• /
• 2013

Objectives : This study was carried out to investigate stepwise regression analysis on cervical abrasion & general characteristics, subjective oral health perception, habit related to oral health, and oral symptom. Methods : The study subjects were 2,158 workers in 23 industrial work places located in Gumi-si, Gyeongsangbuk-do Province from June 1 to July 1, 2012. As a result, the following conclusions were obtained. Results : 1. The cervical abrasion rate was high in men and older age group. 2. The cervical abrasion rate was high in a case of having not received scaling for the past one year. 3. The cervical abrasion rate was high in frequent tooth brushing. 4. The cervical abrasion rate was high in group having no bleeding in tooth and the gum. 5. The cervical abrasion rate was high in group having the cold symptom in teeth. 6. Excluding gum pain and bleeding, factors affecting tooth abrasion were gender, age, scaling over the past year, frequency of brushing a day and tooth sensitivity when cold food was ingested. 7. Gender and tooth sensitivity turned out to have negative(-) effect. age, scaling over the past year and frequency of brushing a day turned out to have positive(+) effect. Conclusions : Through this study, the best prevention method of cervical abrason is effective tooth brushing education and regular dental check up.

• Corrosion Science and Technology
• /
• v.16 no.6
• /
• pp.285-293
• /
• 2017

The effects of sulfate reducing bacteria (SRB) on the corrosion and scaling of the Q235 carbon steel has been investigated in the simulated sewage water and oil field gathering pipelines production water, using scanning electron microscopy (SEM), energy dispersive x-ray spectrometry (EDS), and three-dimensional stereoscopic microscope. Results indicated that the concentration of SRB reached the maximum value on the ninth day in simulated sewage water with a large amount of scaling on the surface of specimen. In oil field gathering pipelines, a large amount of scaling and mineralization of mineral salts and thick deposition of extracellular polymeric substance (EPS) layers were also observed on the surface of specimen. The thickness of biofilm was about $245{\mu}m$ within 30 days. After adding microbicides, the thickness of corrosion products film was only up to $48-106{\mu}m$ within 30 days, suggesting that SRB could induce biomineralization. Under-deposit corrosion morphology was uniform in the absence of microbicides while local corrosion was observed in the presence of microbicides.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.10C
• /
• pp.963-972
• /
• 2002

An 8192-point pipelined FFT/IFFT processor core is designed, which can be used in multi-carrier modulation systems such as DUf-based VDSL modem and OFDM-based DVB system. In order to improve the signal-to-quantization-noise ratio (SQNR) of FFT/IFFT results, two-step convergent block floating-point (TS_CBFP) scaling is employed. Since the proposed TS_CBFP scaling does not require additional buffer memory, it reduces memory as much as about 80% when compared with conventional CBFP methods, resulting in area-and power-efficient implementation. The SQNR of about 60-㏈ is achieved with 10-bit input, 14-bit internal data and twiddle factors, and 16-bit output. The core synthesized using 0.25-$\mu\textrm{m}$ CMOS library has about 76,300 gates, 390K bits RAM, and twiddle factor ROM of 39K bits. Simulation results show that it can safely operate up to 50-㎒ clock frequency at 2.5-V supply, resulting that a 8192-point FFT/IFFT can be computed every 164-${\mu}\textrm{s}$. It was verified by Xilinx FPGA implementation.

• Journal of Ocean Engineering and Technology
• /
• v.35 no.1
• /
• pp.75-81
• /
• 2021

Artificial Coral Reefs (ACRs) have been introduced to help solve coastal erosion problems, but their feasibility has not been assessed with field data. This study conducted a feasibility analysis of ACRs on their erosion mitigation effects by performing a case study of Cheonjin-Bongpo beach, South Korea. A numerical-physical combined analysis was carried out using a SWAN model simulation and physical model test with a scale of 1/25 based on field observations of Cheonjin-Bongpo beach. Both Dean's parameter and the surf-scaling parameter were applied to comparative analysis between the absence and presence conditions of the ACR. The results for this combined method indicate that ACR attenuates the wave height significantly (59~71%). Furthermore, ACR helps decrease the mass flux (~50%), undertow (~80%), and maximum wave set up (~61%). The decreases in Dean's parameter (~66%) and the surf-scaling parameter suggest that the wave properties changed from the dissipative type to the reflective type even under high wave conditions. Consequently, an ACR can enhance shoreline stability.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.11
• /
• pp.73-81
• /
• 2016

In general, infrared images have less sharpness and image details than visible images. So, the prior image upscaling methods are not effective in the infrared images. In order to solve this problem, this paper proposes an algorithm which initially up-scales an input infrared (IR) image by using adaptive dynamic range encoding (ADRC)-based super-resolution (SR) method, and then fuses the result with the corresponding visible images. The proposed algorithm consists of a up-scaling phase and a fusion phase. First, an input IR image is up-scaled by the proposed ADRC-based SR algorithm. In the dictionary learning stage of this up-scaling phase, so-called 'pre-emphasis' processing is applied to training-purpose high-resolution images, hence better sharpness is achieved. In the following fusion phase, high-frequency information is extracted from the visible image corresponding to the IR image, and it is adaptively weighted according to the complexity of the IR image. Finally, a up-scaled IR image is obtained by adding the processed high-frequency information to the up-scaled IR image. The experimental results show than the proposed algorithm provides better results than the state-of-the-art SR, i.e., anchored neighborhood regression (A+) algorithm. For example, in terms of just noticeable blur (JNB), the proposed algorithm shows higher value by 0.2184 than the A+. Also, the proposed algorithm outperforms the previous works even in terms of subjective visual quality.

• Journal of Korean society of Dental Hygiene
• /
• v.1 no.1
• /
• pp.111-123
• /
• 2001

Objectives : The purpose of this study was to investigate distribution of periodontal status and treatment need between smokers and nonsmokers. Methods : Interview and measurement was completed by 82 smoker students and 59 nonsmoker students in Taegu Health College from April 1 to 31, 2001. The community periodontal index of treatment needs(CPITN) was analyzed by percentage. Results : In distribution of CPITN by age, almost all subjects had periodontal diseases except for aged 20~24 years nonsmokers(4%). Smoking 5 cigarettes per a day, up to 10, and above 10 increased 5.3%. 7.1%. and 9.5% in 4 score of CPITN, respectively. In years of smoking, smokers who had above 5 years(13.5%) were higher than below those(6.7%), 20% for smoker who take tooth brushing once per a day had higher than 8.3%(or three in depth of pocket above 6mm. In treatment need, all subjects should take education(or oral health except for aged 20~24 years nonsmokers(4%), 96% of smokers and nonsmokers were need scaling. Conclusion : This study indicated that treatment needs for periodontal diseases and scaling in smoker were higher than nonsmoker those.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.3
• /
• pp.112-118
• /
• 2014

As higher quality of image is required for digital image scaling, longer processing time is required. Therefore the technology that can make higher quality image quickly is needed. We propose the double linear-cubic convolution interpolation which creates the high quality image with low complexity and hardware resources. The proposed interpolation methods which are made up of four one-dimensional linear interpolations and one one-dimensional cubic convolution perform linear-cubic convolution interpolation in horizontal and vertical direction. When compared in aspects of peak signal-to-noise ratio(PSNR), performance time and amount of hardware resources, the proposed interpolation provided better PSNR, low complexity and less hardware resources than bicubic convolution interpolation.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.04a
• /
• pp.606-611
• /
• 2012

An analysis and design method for reducing aerodynamic noise in high-speed trains based on biomimetics of noiseless flight of owl is proposed. Wind tunnel testing and numerical CFD (Computational Fluid Dynamics) simulation for the basic inter-coach spacing model are carried out, and their results compared. To determine the effect of scaling of the owl's flight feather on the noise reduction, two-fold and a four-fold scaled up model of the feather are constructed, and the numerical simulations are carried out to obtain the aerodynamic noise levels for each scale. Original model is found to reduce the noise level by 10 dB, while two-fold increase in length dimensions reduces the noise by 12 dB. Validation of numerical solution using wind tunnel experimental measurements are presented as well.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.3
• /
• pp.193-198
• /
• 2002

In this paper, we Propose a PD+I fuzzy controller using an error-accumulating applying factor. In fuzzy control, analytical study was done formerly, in which fuzzy control can be classified by PD type and PI type, and also the study for getting merits of both types was done, too. But the mixed type has a complex structure and many parameters. The proposed fuzzy controller is 2-input 2-out-put and PD type fuzzy control is used as a basic structure. And the proposed controller annihilates a steady-state error and improves transient responses because of using the error-accumulating applying factor which is determined in the real time along the current state of controlled process. Futhermore it is easy to tune the system because of decreasing the number of scaling factors and the I type controller with resetting resolves the integral wind-up problem. Finally we apply the proposed scheme to various plants and show the performance betterment.