• 제목/요약/키워드: Saturation Amplifier

검색결과 89건 처리시간 0.028초

CMOS 공정을 이용한 15MHz, 2.6mW, 6차 대역통과 Gm-C 필터 (A CMOS 15MHz, 2.6mW, sixth-order bandpass Gm-C filter)

  • 유창식;정기욱;김원찬
    • 전자공학회논문지C
    • /
    • 제34C권6호
    • /
    • pp.51-57
    • /
    • 1997
  • Low-voltage, low-power gm-C filter utilizing newly dveloped operational transconductance amplifier (OTA) is described in this paper. The OTA has only two MOS transistors in saturation region between $V_{DD}$ and GND, and thus low voltage operation is possible. To improve the linearity, the OTA is made differential. Common mode feedback, essential in differential circuit, requires no additional implemented in $0.8\mu\textrm{m}$ CMOS process, and the center frequency can be controlled from 15MHz with 3.0V single power supply.

  • PDF

Optimum Gain Distribution of the Ampilfiers in High Power YLF($Nd^{3+}$)-Phosphate Glass($Nd^{3+}$) Laser System

  • CHi, Kyeong-Koo
    • 한국광학회:학술대회논문집
    • /
    • 한국광학회 1989년도 제4회 파동 및 레이저 학술발표회 4th Conference on Waves and lasers 논문집 - 한국광학회
    • /
    • pp.20-25
    • /
    • 1989
  • The nonlinear, time dependent photon transport equations of Frantz and Nodvik, which describe the amplification of an optical pulse in an active medium, are modified to a simpler equation which describes only the amplification of energy. with this equation, the output energy of the high power YLF(Nd3+)-Phosphate Glass(Nd3+) Laser System is calculated. When the stored energy density Est is 0.10J/㎤, 0.16J/㎤, 0.228J/㎤, and 0.50J/㎤, and with the assumption of uniform population inversion density, the final output energy of this laser system is 5.38J, 176J, 317J, and 283J, respectively. The gain saturation causes distortion of the output beam. This phenomenon is described in detail at the first three rod amplifier systems in the case of E=0.228J/㎤. The peak current and decay time constant of the flashlamps, which are used to obtain population inversion in the active medium, are investigated. The flashlamp driving circuit which has optimum operational performance should have {{{{ SQRT { LC} }} time about 100$\mu$sec.

  • PDF

Overhauser dynamic nuclear polarization for benchtop NMR system using a permanent magnet of 1.56 T

  • Lee, Yeon-seong;Lim, Duk-Young;Shim, Jeong Hyun
    • 한국자기공명학회논문지
    • /
    • 제23권3호
    • /
    • pp.81-86
    • /
    • 2019
  • Overhauser dynamic nuclear polarization (O-DNP) has been an efficient method to boost the thermal nuclear polarization in liquids at room temperature. However, O-DNP for a benchtop NMR using a permanent magnet has remained unexplored yet. In this work, we report the development of an O-DNP system adopting a permanent magnet of 1.6 T. Q-band (~43 GHz) high-power amplifier produced 6 W microwave for saturation. Instead of resonator, we used an open-type antenna for the microwave irradiation. For several representative small molecules, we measured the concentration and frequency dependences of the enhancement factor. This work paves the way for the development of a benchtop DNP-NMR system overcoming its disadvantage of low quality signal when using a permanent magnet.

I&Q Demodulator를 이용한 RF 고정 위상 제어기 설계 (Design of a RF fixed phase control circuit using I&Q Demodulator)

  • 박웅희;장익수;허준원;강인호
    • 전자공학회논문지D
    • /
    • 제36D권1호
    • /
    • pp.8-14
    • /
    • 1999
  • 고주파에서 사용되는 능동소자들은 입력전력의 세기에 의하여 위상변화량이 달라지게 된다. 특히 증폭기에 사용되는 트랜지스터는 효율을 고려하여 포화영역 근처에서 사용하게 되면, 입력전력의 변화에 따른 위상 변화량이 크게 나타난다. 본 연구는 능동소자를 통과할 때 발생하는 위상변화량을 고정시키는 회로에 관한 것이다. 회로내의 임의의 가변 위상 벼노한기를 이용하여 위상을 변화시킬 시, 입력부에서 커플링 한 기준신호의 위상과 출력부의 비교신호의 위상을 비교하여 회로내의 또 다른 자동 위상 변환기를 동작하여 자동적으로 고정된 위상 변화량을 가진 신호가 출력되는 회로를 제작하였다. 약 10dB 동작 범위에서 위상이 고정됨과 2개 이상의 신호 입력과 FM 신호 입력시에도 전체회로를 통한 위상 변화량이 측정되고 또한 고정될 수 있음을 확인하였다. 실험주파수는 1960 MHz이고, 실험 기판은 두께가 31mil이고 비유전율 3.2인 테플론을 이용하였다.

  • PDF

Clamping Op-Amp를 이용한 광대역 로그 비디오 증폭기의 선형성 개선에 관한 연구 (Study on the Development of Linearity of Broad-Band SDLVA Using Clamping Op-Amp)

  • 박종설;김종건;김점식
    • 한국전자파학회논문지
    • /
    • 제22권6호
    • /
    • pp.641-647
    • /
    • 2011
  • 본 논문은 0.5~2.0 GHz에서 -70~0 dBm의 동적 범위를 갖는 로그 비디오 증폭기(Successive Detecting Log Video Amplifier, 이하 SDLVA)를 설계 및 제작하였다. 제작된 SDLVA는 5단의 증폭기를 이용한 고주파 출력부, 2단의 로그검파기 그리고 선형성 개선을 위하여 클램핑 연산증폭기를 이용한 가산 회로로 구현하였다. 제작된 SDLVA의 측정 결과는 73 dB 이상의 소신호 이득과 10.1~12.2 dBm의 고주파 포화 출력 특성을 갖는다. 그리고 -70~0 dBm 입력 시 25 mV/ dB${\pm}$1.0 mV의 기울기를 갖고 ${\pm}$1.5 dB 이하의 선형 특성을 갖는 비디오 신호를 출력한다.

OFDM 시스템에서 PAPR 감소기법을 적용한 다항식 사전왜곡 기법에 관한 연구 (A Study on Polynomial Pre-ditsortion Technique Using PAPR Reduction Methode)

  • 박비호;김완태;조성준
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2009년도 추계학술대회
    • /
    • pp.160-163
    • /
    • 2009
  • HPA(High Power Amplifier)는 무선통신 시스템에서 필수적으로 요구되는 요소 중의 하나다. 그러나 전력 증폭기는 비선형 특성을 가지고 있으며 신호의 비선형 왜곡을 유발 시키고 인접채널 간섭을 심화시켜 시스템의 효율을 떨어뜨린다. 이러한 문제점을 해결하기 위해 많은 선형화 기법들이 제시되어왔다. 다항식 사전왜곡 기법은 증폭기로 입력되는 신호가 미리 증폭기의 역 특성을 갖도록 하는 기법으로 다항식을 통하여 증폭기를 모델링하기 때문에 수렴 속도가 빠르고 다른 기법들에 비해 좋은 성능을 보인다. 하지만 다항식으로 역 비선형 특성을 구할 경우, 증폭기의 포화영역에서 역 비선형 특성이 거의 무한대가 되어야 하기 때문에 선형화기의 성능이 크게 떨어진다. 본 논문에서는 이러한 문제점을 해결하기 위하여 PAPR(Peak-to-Average Power Ratio) 기법을 적용하여 다항식 사전왜곡 기법의 성능을 향상 시켰다.

  • PDF

S 대역 신호에 의한 위성항법수신기의 RF 신호간섭 (Radio Frequency Interference on the GNSS Receiver due to S-band Signals)

  • 권병문;신용설;마근수;주정갑;지기만
    • 한국항공우주학회지
    • /
    • 제47권5호
    • /
    • pp.388-396
    • /
    • 2019
  • 본 논문은 시험발사체에 탑재된 송신기에서 송신되는 S 대역 신호에 의해 위성항법수신기에서 나타난 RF 신호간섭을 설명하고, 그 원인을 분석한다. 능동형 위성항법안테나의 LNA는 항법위성 신호와 비교하여 상대적으로 신호세기가 매우 높은 S 대역 신호에 의해 포화되었으며, 2개의 S 대역 신호가 위성항법안테나에 수신될 때마다 GNSS 대역에 해당하는 상호변조신호가 LNA에서 발생하였다. 이러한 현상으로 인해 위성항법수신기에서 계산된 항법위성신호의 C/N0가 크게 감쇄하였다. S 대역 신호에 의한 RF 신호간섭을 차단하기 위하여 위성항법안테나 LNA의 설계변경을 수행하였고, 설계변경 전 후의 LNA에 대해 수행한 비교시험을 통하여 설계변경된 LNA에서 S 대역 신호에 의한 RF 신호감쇄 현상이 억제될 수 있음을 확인하였다.

5G 이동통신을 위한 GaN RF 전자소자 및 집적회로 기술 동향 (Technical Trends in GaN RF Electronic Device and Integrated Circuits for 5G Mobile Telecommunication)

  • 이종민;민병규;장우진;지홍구;조규준;강동민
    • 전자통신동향분석
    • /
    • 제36권3호
    • /
    • pp.53-64
    • /
    • 2021
  • As the 5G service market is expected to grow rapidly, the development of high-power, high-efficiency power amplifiers for the 5G communication infrastructure is indispensable. Gallium nitride (GaN) is attracting great interest as a key device in power devices and integrated circuits due to its wide bandgap, high carrier concentration, high electron mobility, and high-power saturation characteristics. In this study, we investigate the technology trends of Ka-band GaN radio frequency (RF) power devices and integrated circuits for operation in the millimeter-wave band of recent 5G mobile communication services. We review the characteristics of GaN RF high electron mobility transistor (HEMT) devices to implement power amplifiers operating at frequencies around 28 GHz and compare the technology of foreign companies with the device characteristics currently developed by the Electronics and Telecommunication Research Institute (ETRI). In addition, the characteristics of Ka-band GaN monolithic microwave integrated circuit (MMIC) power amplifiers manufactured using various GaN HEMT device technologies are reviewed by comparing characteristics such as frequency band, output power, and output power density of integrated circuits. In addition, by comparing the performance of the power amplifier developed by ETRI, the current status and future direction of domestic GaN power devices and integrated circuit technology will be discussed.

효율이 특화된 전력 증폭기와 개선된 바이어스 모듈레이터로 구성되는 진보된 WCDMA용 하이브리드 포락선 제거 및 복원 전력 송신기 (Advanced Hybrid EER Transmitter for WCDMA Application Using Efficiency Optimized Power Amplifier and Modified Bias Modulator)

  • 김일두;우영윤;홍성철;김장헌;문정환;전명수;김정준;김범만
    • 한국전자파학회논문지
    • /
    • 제18권8호
    • /
    • pp.880-886
    • /
    • 2007
  • 본 논문에서는 효율 특성에서 특화된 전력 증폭기(PA)와 개선된 바이어스 모듈레이터를 이용하여 새로운 하이브리드 포락선 제거 및 복원(EER) 전력 송신기를 제안하였다. 전력 증폭기는 모듈레이션 신호의 평균 전력영역에서 대부분 동작하기 때문에 평균 드레인 바이어스 전압에서 전력 증폭기의 효율은 전체 전력 송신기의 효율 특성에 매우 중요한 영향을 미친다. 따라서 전력 증폭기의 효율을 평균 드레인 바이어스 전압 영역에서 최적화하였다. 또한, 바이어스 모듈레이터는 메모리 영향을 최소화하기 위하여 에미터 팔로워(Emitter Follower)와 결합되도록 하였다. 포화 전력 증폭기인 역 Class F급 전력 증폭기가 1 GHz 대역 포워드 링크 싱글 캐리어를 가지는 WCDMA 신호에 대해서 최고 전력이 5W인 LDMOSFET을 이용하여 설계되었다. 실험 결과, 바이어스 모듈레이터는 31.8V의 최고 전력 크기를 가지면서 64.16%의 효율을 유지하였다. 제안된 전력 증폭기와 바이어스 모듈레이터를 결합한 전력 송신기는 기존 방식으로 설계된 전력 증폭기와 결합하였을 경우보다 8.11%나 개선된 44.19%의 전체 효율 특성을 보였다. 게다가, F급 동작을 보이면서 전체 출력 전력은 기존 방식의 전력 증폭기를 결합할 경우보다 2.9dB 개선된 32.33 dBm으로 개선되었고, PAE와 5MHz 옵셋에서의 ACLR은 각각 38,28%, -35.9 dBc를 기록하였다. 이와 같은 결과들은 고선형성과 함께 고효율 특성을 가지는 전력 송신기에 매우 적합한 구조가 될 수 있다는 것을 명확히 보여주고 있다.

60 GHz 무선 LAN의 응용을 위한 고이득 저잡음 증폭기에 관한 연구 (Studies on the High-gain Low Noise Amplifier for 60 GHz Wireless Local Area Network)

  • 조창식;안단;이성대;백태종;진진만;최석규;김삼동;이진구
    • 대한전자공학회논문지SD
    • /
    • 제41권11호
    • /
    • pp.21-27
    • /
    • 2004
  • 본 논문에서는 60 GHz 무선 LAN(wireless local area network) 응용을 위해 0.1 ㎛ Γ-gate pseudomorphic high electron mobility transistor(PHEMT)를 이용하여 V-band용 millimeter-wave monolithic integrated circuit(MIMIC) 저잡음 증폭기를 설계 및 제작하였다. 본 연구에서 개발한 PHEMT의 DC 특성으로 드레인 포화 전류 밀도(Idss)는 450 mA/mm, 최대 전달컨덕턴스(gm, max)는 363.6 mS/mm를 얻었으며, RF 특성으로 전류이득 차단주파수(fT)는 113 GHz, 최대 공진 주파수(fmax)는 180 GHz의 성능을 나타내었다. V-band MIMIC 저잡음 증폭기의 개발을 위해 PHEMT의 비선형 모델과 CPW 라이브러리를 구축하였으며, 이를 이용하여 V-band MIMIC 저잡음 증폭기를 설계하였다. 설계된 V-band MIMIC 저잡음 증폭기는 본 연구에서 개발된 PHEMT 기반의 MIMIC 공정을 이용해 제작되었으며, V-band MIMIC 저잡음 증폭기의 측정결과, 60 GHz에서 S21이득은 21.3 dB, 입력반사계수는 -10.6 dB 그리고 62.5 GHz에서 출력반사계수는 -29.7 dB의 특성을 나타내었다. V-band MIMIC 저잡음 증폭기의 잡음지수 측정결과, 60 GHz에서 4.23 dB의 특성을 나타내었다.