• Korea Journal of Cosmetic Science
• /
• 제2권1호
• /
• pp.1-10
• /
• 2020

Protection mechanisms for skin damage of ultraviolet (UV) absorbers in personal care products for protection against UV are well studied, but not for hair protection. The purpose of this study is to describe and compare the changes of physical property produced in human hair by doses of the UV-B exposure causing protein degradation. To observe the change of physical properties in hair, the experimental intensity of UV-B exposure has been established on the basis of statistical data from official meterological administration as daily one hour sunlight exposure for two weeks. Polysilicone-15, ethylhexyl methoxycinnamate (OMC), and octocrylene were employed for UV-B absorber, and those were treated to hair swatch by rubbing wash through shampoo and conditioner. Bending rigidity displayed kinetically successive reduction at high doses of UV exposure up to the 8,000 s, and exhibited different level at each sample of UV-B absorber. However, the values of Bossa Nova Technologies (BNT) for shinning factor were already saturable at the 2,000 s exposure except that treated with polysilicone-15. The differential scanning calorimetry (DSC) to measure a strength of inner protein produces a successive reduction of enthalpy as like a reduction of bending rigidity upon UV exposure. Surface roughness from lateral force microscope (LFM) acquired immediately after UV exposure show a saturable frictional voltage which has been also found in a saturable BNT data as the time of UV exposure increases. Through researching the DSC and the LFM, shinning of hair was much correlated to the protein damage at the surface, and bending rigidity could be regulated by the protein structural damage inside hair. Therefore, the optimization of efficient strategy for simultaneous prevention of hair protein on the surface and internal hair was required to maintain physical properties against UV.

• Current Optics and Photonics
• /
• 제7권6호
• /
• pp.738-744
• /
• 2023

Graphene-based saturable absorbers (SAs) are widely used as laser mode-lockers at various laser oscillators. In particular, transmission-type graphene-SAs with ultrabroad spectral coverage are typically manufactured on transparent substrates with low nonlinearity to minimize the effects on the oscillators. Here, we developed two types of transmitting graphene SAs based on CaF₂ and ZnSe. Using the graphene-SA based on CaF₂, a passively mode-locked mid-infrared Cr:ZnS laser delivers relatively long 540 fs pulses with a maximum output power of up to 760 mW. In the negative net cavity dispersion regime, the pulse width was not reduced further by inhomogeneous group delay dispersion (GDD) compensation. In the same laser cavity, we replaced only the graphene-SA based on CaF₂ with the SA based on ZnSe. Due to the additional self-phase modulation effect induced by the ZnSe substrate with high nonlinearity, the stably mode-locked Cr:ZnS laser produced Fourier transform-limited ~130 fs near 2,340 nm. In the stable single-pulse operation regime, average output powers up to 635 mW at 234 MHz repetition rates were achieved. To our knowledge, this is the first attempt to achieve shorter pulse widths from a polycrystalline Cr:ZnS laser by utilizing the graphene deposited on the substrate with high nonlinearity.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 춘계학술대회 논문집
• /
• pp.675-676
• /
• 2012

• 한국광학회:학술대회논문집
• /
• 한국광학회 2009년도 동계학술발표회 논문집
• /
• pp.279-280
• /
• 2009

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.851-852
• /
• 2011

• 한국광학회:학술대회논문집
• /
• 한국광학회 1989년도 제4회 파동 및 레이저 학술발표회 4th Conference on Waves and lasers 논문집 - 한국광학회
• /
• pp.5-6
• /
• 1989

The overall design of the optical isolator system is prepared for the 1 TW Nd pulse laser. Two pockels cell optical switches are employed to suppress the amplified spontaneous emission and the backward reflection. The role of two Farady rotators is to protect the laser system from the light amplified after back reflection. One saturable absorber dye and one liquid crystal polarizer/isolator will also serve as optical isolator.

• 한국광학회지
• /
• 제1권1호
• /
• pp.52-57
• /
• 1990

피코초 레이저와 고속 전자장치를 사용하여 subnanosecond에서 microsecond 넓은 범위에 걸쳐서 발광 소멸 시간을 측정할 수 있는 time-correlated single photon counting(TCSPC) 장치를 개발하였다. 이 TCPSC를 사용하여 색소레이저에 있어서 saturable absorber로 많이 쓰이는 DODCI의 소멸시간 및 회전 완화시간을 측정함으로써 여기상태에서의 동력학과 회전운동에 관해 연구하였다.

• 한국광학회지
• /
• 제11권5호
• /
• pp.360-364
• /
• 2000

반도체 포화 흡수거울 (Semiconductor Saturable Absorber Mirror:SESAM)을 이용하여 Cr:LiSAF 레이저를 제작하고 이를 모드록킹 시켰다. 펌핑 레이저는 파장이 667 nm이고, 출력이 500mW인 두 대의 고출력 레이저(Coherent S-67-500C-100-H)가 사용되었으며, 레이저 결정은 Brewster-Brewster 모양인 $Cr^{+3}$의 농도가 1.5%이고 길이가 6mm인 것을 사용하였다. 공진기는 X-형 구조로, 곡률반경이 10cmdls 오목거울과, 군속도 보상을 위한 SF10 프리즘, 투과율이 1%의 출력거울을 사용하였다. 포화흡수체로 사용되는 SESAM의 구조는 맨위층에 10nm의 $AlAs/Al_{0.15}Ga_{0.85}As$ 양자우물과 30쌍의 $AlAs/Al_{0.15}Ga_{0.85}As/GaAs/Al_{0.15}Ga_{0.85}As$반사경으로 구성되어 있다. 펌핑 레이저의 출력이 800mWdlfEo 레이저 출력은 3mW였고, 중심파장은 833nm이었으며 스펙트럼 대역폭은 4nm, 레이저 펄스폭은 220fs 였다.

• 한국광학회지
• /
• 제13권4호
• /
• pp.340-346
• /
• 2002

초기투과도 0.48과 0.38인 포화흡수체 $Cr^{4+}$: YAG를 사용한 수동 큐스위칭 Nd:YAG 공진기에서 포화흡수의 초기 광흡수 효과로 낮은 Q-상태에서 나타나는 포화흡수체의 투과 광손실 변화와 더불어 레이저 매질의 펌핑된 밀도반전 상태를 분석하였다. 포화흡수체의 초기 광흡수로 수동 큐스위칭 열림동작때 나타나는 포화흡수체의 투과도는 각각 0.70$\pm$0.01과 0.62$\pm$0.01이었다. 이는 큐스위칭 레이저 공진기의 초기 광손실이 간소함을 의미한다. 큐스위칭 열림동작 시점에서 측정된 두 $Cr^{4+}$:YAG의 기저상태 $Cr^{4+}$ 밀도수는 약 1.4${\times}{10^{17}}$$cm^{-3}$이고 기저상태에 대한 여기상태의 $Cr^{4+}$이온밀도수의 비는 약 44%이었다. 또, 큐스위칭 펄스 발생을 위해 펌핑된 최소 반전밀도수는 각각 3.6${\times}{10^{17}}$과 3.9${\times}{10^{17}}$ $cm^{-3}$이고 양자추출효율은 두 경우 모두 약 0.32였다. 낮은 Q-상태에서 나타나는 포화흡수체의 광흡수 효과를 고려한 수동 큐스위칭 레이저 출력에너지의 수정 이론값은 각각 18과 18.5 mJ로 측정된 실험값 약 17$\pm$1과 18$\pm$1.5mJ과 잘 일치함을 보였다.

• ETRI Journal
• /
• 제18권1호
• /
• pp.1-14
• /
• 1996

We have experimentally observed and theoretically analyzed the gain dependent optimum repetition rates of a hybrid-type active and passive mode locked laser pulses in an erbium-doped fiber laser of the figure-of-eight geometry by utilizing a nonlinear amplifier loop mirror (NALM) as a saturable absorber and a directional-coupler type electro-optic modulator as an active mode locker. Transform-limited mode-locked pulses of about 10 ps width were obtained at repetition rates which correspond to harmonics of the cavity fundamental frequency and depend on the optical amplifier gain in the NALM.