• Journal of the Korean Wood Science and Technology
• /
• v.33 no.3 s.131
• /
• pp.1-10
• /
• 2005

Tree-ring chronologies can be used to date historical buildings or furnitures by matching them with chronologies of living trees. Tree-ring dating gives a calendar year to each tree ring and produces the cutting dates of logs or woods. In this study, we intend to extend our tree-ring dating applications to Korean furnitures. As a case study, we examined two traditional furnitures, one cabinet 'Jang' and the other chest, 'Bandaji'. The cutting date of the cabinet woods was A.D. 1839. The date of the outmost ring in the chest was A.D. 1904. Due to no bark present, the cutting date of the chest was only estimated as $1930{\pm}10$ by 'sapwood rings' estimation method. Ring-width pattern of the latter one also indicated that the origin of the chest must be Kangwon province. This case study suggests that tree-ring dating would be a useful and accurate method to identify the critical dates for the chronicles of Korean traditional furnitures.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.5
• /
• pp.437-448
• /
• 2018

Physical characteristics of Korean red pine (Pinus densiflora) were investigated with different cultivation locations in Taebaek Mountains as Goseong-gun, Hongcheon-gun and Bonghwa-gun as experimental sites. Moisture content based on air-dried or green (artificial) wood was no significant differences with different cultivation places. Specific gravities of both sapwood and heartwood of red pine from Bonghwa-gun were higher than those from other two sites (Hongcheon-gun or Goseong-gun). Specific gravity of heartwood of red pine from Goseong-gun was higher than it from Hongcheon-gun, but this trend was opposite in case of sapwood. Higher specific gravity of red pine heartwood from Goseong-gun maybe resulted in higher strength than those of other sites. In shrinkage ratio, there was no significant difference among different cultivation places in radial directions, but red pine from Bonghwa-gun was higher than those of other sites in tangential directions. Hygroscopicity was no significant differences with different cultivation places. These results will be helpful information for efficient use of pinewood and good quality of pinewood production for genetical breeding improved.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.4
• /
• pp.84-92
• /
• 2008

Anatomical and physical characteristics of Pinus densiflora woods damaged by forest fire at Yangyang-gun, Kangwon-do were investigated in present study. Even though the bark was severly carbonized, no trace of carbonization in the xylem was found. The amount of resin exudation was different by the degree of fire damage. Green moisture content of sapwood in the damaged wood was lower than that in the sound wood, but vice versa in the heartwood. Green density of heartwood in the damaged wood was higher than that in the sound wood, but there was no significant difference in sapwood. Cambial activities were found stopped in the severely damaged wood but were identified in the lightly damaged wood. In safranine staining process, epithelial and ray parenchyma cell walls in the damaged woods showed darker hue than those in the sound wood. Granular substances were observed in the lumina of ray parenchyma and epithelial cells of the severely damaged wood. Relative crystallinity of the outermost growth ring in the severely damaged wood was slightly higher than that in the sound wood.

• Korean Journal of Medicinal Crop Science
• /
• v.26 no.3
• /
• pp.233-239
• /
• 2018

Background: Inflammation plays an important role in various diseases, including ulcerative colitis, Behcet's disease, and rheumatoid arthritis. In this study, we investigated the anti-inflammatory effects of Morus alba L. extracts obtained using different extraction methods (water extraction or high temperature extraction) on RAW264.7 cells. Methods and Results: Extracts from the central part (including the heartwood, sapwood, cambiun, and phloem) and bark (including the periderm and cortex) of Morus alba L. were obtained using either water or high temperature extraction. The following extract were obtained: MA1, water extract from the central part of Morus alba L., MA2, high temperature extract from the central part of Morus alba L., MA3, water extract from the bark of Morus alba L., and MA4, high temperature extract from the bark of Morus alba L. None of these extracts was observed to be cytotoxic to RAW264.7 cells. The MA2 extract reduced the production of LPS-induced NO (nitric oxide), $PGE_2$ (prostaglandin $E_2$), $TNF-{\alpha}$, IL-6, and $IL-1{\beta}$ production in LPS-stimulated RAW264.7 cells. Conclusions: These results indicated that the inflammatory response was moderated by MA2. Treatment with MA2 could be used as a natural medicine for treating diseases involving inflammation. However, further experiments are required to determine how the high temperature extraction method alters the active ingredients in the extract and influences the anti-inflammatory effects of Morus alba L..

• Journal of the Korean Wood Science and Technology
• /
• v.14 no.1
• /
• pp.55-60
• /
• 1986

Discoloration sensitivities of woods grown in this country haven't reported yet. Therefore we examined discoloration sensitivities of domestic wood specimens to iron (0.1 %, $FeCl_3.6H_2O$), alkali (pH 12.0, NaOH). acid (pH 1.0, $C_2H_2O_4$) and exposing to sunlight (40 hrs), Thirty-six hardwood species were collected and examined. All specimens were prepared from heartwoods of the collected species. But the specimens of 4 Betula species were divided into sapwoods and heartwoods. By iron stain, the color differences (${\Delta}E$) of 21 wood specimens including one Betula sapwood showed above 12.0, which means strong discoloration sensitivities, and of 3 specimens including one Betula sapwood showed below 2.5, which means weak discolorations. The most strong iron discoloration species was Jungkukgulpi-namu (Pterocarya stenoptera). By alkali stain, the color differences (${\Delta}E$) of 3 wood specimens showed above 9.0, which means strong discoloration sensitivities, and of 18 wood specimens including 4 Berula sapwoods showed below 2.5, which means weak discolorations. By acid stain, the color differences (${\Delta}E$) of 6 wood specimens showed above 10.0 which means strong discoloration sensitivities, and of 12 wood specimens including one Betula sapwoods showed below 2.5, which means weak discolorations. By exposing to sunlight, the color differences (${\Delta}E$) of 31 wood specimens including one Betula sapwoods showed below 6.5, which means, strong discoloration sensitivities, and of only one specimens showed below 2.5, which means weak discoloration. The most strong discoloration species by exposing to sunlight was Guirung-namu (Prunus padus). In general, it was shown that hardwoods grown in Korea were most subject to change of color by exposing to sunlight and next were by iron stain. Domestic hardwoods showed some differences in discoloration sensitivities from domestic softwoods previously reported.

• Research in Plant Disease
• /
• v.11 no.1
• /
• pp.80-84
• /
• 2005

Bacterial canker of sweet cherry (Prunus avium L.) was observed in farmers\' orchards in Goesan, Chungbuk in 2003. Typical canker symptoms occurred on the branches or twigs of sweet cherry in early spring and bacterial exudates oozed out of the cracked barks of diseased trees. Watersoaked brown symptoms appeared on the leaves and severe infection caused thorough defoliation on the branches or twigs of sweet cherry. When severely infected branches or twigs were cut, irregular and rusty-colored symptoms in sapwood and heartwood were clearly found, indicating that they can serve as specific symptoms of bacterial canker of sweet cherry. The causal bacterium responsible for the symptoms was isolated purely from the infected sapwood of sweet cherry. Based on its morphological, physiological and biochemical characteristics, the causal bacterium was identified as Pseudomonas syringae pv. morsprunorum. The bacterium was pathogenic on sweet cherry and Japanese apricot, but not on peach, cherry, and kiwifruit. It is proposed that the disease be named as bacterial canker of sweet cherry.

• Journal of the Korean Wood Science and Technology
• /
• v.48 no.5
• /
• pp.666-675
• /
• 2020

This study investigated mechanical characteristics of pine trees in Yeongdong (Goseong-gun), Yeongseo (Hongcheon-gun), and Yeongnam (Bonghwa-gun) to define differences in the material quality among pine trees of the three regions. The compressive strength, hardness and shear strength of pine trees of each region were measured. There were no differences in the compressive strength of the juvenile woods among the regions, while the heartwood and sapwood in Bongwha generally showed the highest compressive strength followed by those in Hongcheon and in Goseong. The hardness of the cross-section of pines in Bonghwa was the highest, and in terms of the hardness of the radial and tangential sections, pines in Goseong topped the list.. There were no difference among heartwoods of each region in terms of the shear strength, but, but sapwood from Bonghwa had higher shear strength than those of the other two regions, which may be attributed to differences in tracheid length and microfibril angle among pines in each region. This study identifies the quality differences among pines of different region, and therefore, is expected to add value by helping choose the domestic pine tree material effectively and selectively, and also select a plus tree.

• Journal of the Korean Wood Science and Technology
• /
• v.31 no.1
• /
• pp.10-15
• /
• 2003

This study was carried out to investigate a radial distribution of moisture contents(MCs) within a log cross section(LC) during oven-drying of circumferential slices cut from some of domestic hardwoods LCs. For zelkova, the slices from sapwood and from transition part already reached to below hygroscopic range at 30% in average MC, whereas the innermost slice represented about 40% MC. A moisture gradient between the innermost slice and the adjacent slice from a cherry LC became severer with drying times. For castor aralia, the green MC for heartwood slices was approximately 23% higher than that for sapwood slices, and the similar moisture gradient still lasted until average 15% MC during oven-drying. For Chinese mahogany, the MCs of the mixed slices and the innermost slice were lower than those of the slices cut from the other parts during all over drying stage.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.6
• /
• pp.481-489
• /
• 2011

This study was conducted to evaluate the pressure treatment characteristics of Japanese red pine and Japanese larch skin timber with ACQ-2, CUAZ-2 and CuHDO-1. The effect of moisture content (MC) on preservative treatability was investigated for Japanese red pine sapwood and Japanese larch heartwood, and fixation characteristics of CCA alternatives was also evaluated. Japanese red pine sapwood, which was dried below 30 percent MC, was fully penetrated with preservatives, and minimum requirement of preservative retention for the hazard class H3 was achieved. Through measuring preservative retention gradient in Japanese red pine sapwood, it was confirmed that the retention gradient of CuHDO-1 was steeper than that of both ACQ-2 and CUAZ-2. In particular, it was intensified at a higher MCs of wood samples (25∼30%). Japanese larch heartwood did not meet the minimum requirement of penetration and retention for the hazard class H3 over the range of pretreatment MCs tested. With presteaming under $121^{\circ}C$ for 12 hours, the treatability of Japanese larch heartwood was enhanced to meet the minimum requirement for the hazard class H3. The fixation rate of copper was much more faster under drying condition compared with nondrying condition; more than 95% of copper were fixed in 3~6 days and 1 day under drying conditions in Japanese red pine sapwood and Japanese larch heartwood, respectively. After 3-week fixation period at ambient temperature, the amount of mobile copper in treated wood sample that remains available for leaching from treated wood was the highest in the wood samples treated with ACQ-2, followed by CuHDO-1 and CUAZ-2. It was proportional to the amount of copper in treating solution.

• Journal of the Korea Furniture Society
• /
• v.20 no.1
• /
• pp.52-60
• /
• 2009

Joyangru, which is located in Woodo mountain in Chuncheon, Korea, was a gate tower of Monsogak. There are little historical records about Joyangru except of the 20th-century records. To study about Joyangru history, a dendrochronological analysis was conducted. We identified also the species of woods, We took 87 samples of wood elements for the species analysis and 13 samples for the dendrochronological analysis. We found 78 hard pines(Diploxylon), 4 Douglass-fir, 3 exotic hard pines(Pinus ponderosa type) and 1 Shorea sp.(Dipterocarpaceae). In the dendrochronological analysis, 2 floor flames were dated in 1887 (with complete sapwood) and 2 beams in 1884. We concluded that Joyangru was reconstructed just after 1888, most likely in 1890 together with Monsogak.