• Journal of Korean Institute of Industrial Engineers
• /
• v.5 no.1
• /
• pp.7-17
• /
• 1979

A procedure for constructing a double sampling plan with zero acceptance number for the first sample whose combined sample size does nat exceed that of the given single or double sampling plan is studied. Using this procedure a double sampling system is proposed that can be used in place of MIL-STD-105D system when the quality history is good, and its composite quality characteristics are tabulated and compared with those of MIL-STD-105D system. The study reveals that composite ASN's of the proposed double sampling system are considerably smaller than those of corresponding MIL-STD-105D system with no appreciable changes in other composite quality characteristics. The procedure is also applied to K SA 3102 plans with similar results. A cost model that can be used in comparing a given single sampling plan with the proposed double sampling plan is also developed.

• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.2
• /
• pp.131-138
• /
• 1999

In discrete-time controlled system, sampling time is one of the critical parameters for control performance. It is useful to employ different sampling rates into the system considering the feasibility of measuring system or actuating system. The systems with the different sampling rates in their input and output channels are named multirate system. Even though the original continuous-time system is time-invariant, it is realized as time-varying state equation depending on multirate sampling mechanism. By means of the augmentation of the inputs and the outputs over one Period, the time-varying system equation can be constructed into the time-invariant equation. In this paper, an alternative time-invariant model is proposed, the design method and the stability of the LQG (Linear Quadratic Gaussian) control scheme for the realization are presented. The realization is flexible to construct to the sampling rate variations, the closed-loop system is shown to be asymptotically stable even in the inter-sampling intervals and it has smaller computation in on-line control loop than the previous time-invariant realizations.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1726-1729
• /
• 1997

In general, the solvability of linear robust output regulation problem are not preserved under time-sampling. Thus, it is found that the digital regulator implemented by itme-sampling of anlog output regulator designed based on the continuous-time linear system model is nothing but a 1st order approximation with respect to time-sampling. By the way, one can design an improved sampled-data regulator with respect to sampling time by utilizing the intrinsic structure of the system. In this paper, we study the system structures which it is possible to design an improved sampled-data regulator with respect to sampling time.

• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.2
• /
• pp.123-130
• /
• 1999

In discrete-time controlled system, sampling time is one of the critical parameters for control performance. It is useful to employ different sampling rates into the system considering the feasibility of measuring system or actuating system. The systems with the different sampling rates in their input and output channels are named multirate system. Even though the original continuous-time system is time-invariant, it is realized as time-varying state equation depending on multirate sampling mechanism. By means of the augmentation of the inputs and the outputs over one period, the time-varying system equation can be constructed into the time-invariant equation. The two multirate formulations have some trade-offs in the simplicity to construct the controller, the control performance. It is good issue to determine the suitable formulation in consideration of performance of them. In this paper, the two categories of multirate formulations will be compared in terms of the linear quadratic (LQ) cost function. The results are used to select the multirate formulation and the sampling rates suitable to the desired control performance.

• Journal of the Semiconductor & Display Technology
• /
• v.16 no.4
• /
• pp.46-51
• /
• 2017

Recent controller design techniques often discretize the target system and implement a discrete controller that is digitized to match the target system. When constructing such a discrete system, it is necessary to first determine the sampling time. The smaller the sampling time is, the more advantageous it can be made similar to the original system, but the cost is a problem when realizing such a configuration as hardware. On the other hand, the longer the time, the more different the system is from the original system, and eventually the control becomes impossible. In this paper, we consider the above problem and propose a more logical approach to determine the sampling time in the discrete system and investigate the relation with the differential controller. We also apply this process to a nonlinear system called ARAGO disc and verify its validity through computer simulation.

• Journal of Biomedical Engineering Research
• /
• v.19 no.2
• /
• pp.143-152
• /
• 1998

In this paper, we present the performances of a Doppler system using single channel RF(Radio Frequency) sampling. This technique consists of undersampling the ultrasonic blood backscattered RF signal on a single channel. Conventional undersampling method in Doppler imaging system have to use a minimum of two identical parallel demodulation channels to reconstruct the multigate analytic Doppler signal. However, this system suffers from hardware complexity and problem of unbalance(gain and phase) between the channels. In order to reduce these problems, we have realized a multigate pulsed Doppler system using undersampling on a single channel, It requires sampling frequency at $4f_o$(where $f_o$ is the center frequency of the transducer) and 12bits A/D converter. The proposed " single-Channel RF Sampling" method aims to decrease the required sampling frequency proportionally to $4f_o$/(2k+1). To show the influence of the factor k on the measurements, we have compared the velocity profiles obtained in vitro and in vivo for different intersequence delays time (k=0 to 10). We have used a 4MHz center frequency transducer and a Phantom Doppler system with a laminar stationary flow. The axial and volumetric velocity profiles in the vessel have been computed according to factor k and have been compared. The influence of the angle between the ultrasonic beam and the flow axis direction, and the fluid viscosity on the velocity profiles obtained for different values of k factor is presented. For experiment in vivo on the carotid, we have used a data acquisition system with a sampling frequency of 20MHz and a dynamic range of 12bits. We have compared the axial velocity profiles in systole and diastole phase obtained for single channel RF sampling factor.ng factor.

• International Journal of Reliability and Applications
• /
• v.11 no.1
• /
• pp.17-22
• /
• 2010

It is desired to estimate the reliability of a system that has two subsystems connected in series where each subsystem has two components connected in parallel. A batch sequential sampling scheme is introduced. It is shown that the batch sequential sampling scheme is asymptotically optimal as the total number of units goes to infinity. Numerical comparisons indicate that the batch sequential sampling scheme performs better than the balanced sampling scheme and is nearly optimal.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.7C
• /
• pp.687-695
• /
• 2005

A bandpass sampling technique, which is a method directly downconverting a bandpass signal to a baseband or a low IF signal without analog mixers, can be an alterative choice for the SDR system to minimize the RF front-end. In this paper, a complex bandpass sampling technique for two bandpass-filtered signals is proposed. We derived generalized formulae for the available sampling range, the signal's IF and the minimum sampling frequency taking into consideration the guard-bands for the multiple RE signals. Thru the simulation experiments, the advantages of the . complex bandpass sampling over the pre-reported real bandpass sampling are investigated for applications in the SDR design.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1991.04a
• /
• pp.34-42
• /
• 1991

This study is directed for the development of an efficient system-level Importance Sampling Technique for system reliability analysis of bridge structures Many methods have been proposed for structural reliability assessment purposes, such as the First-order Second-Moment Method, the Advanced Second-Moment Method, Computer Simulation, etc. The Importance Sampling Technique can be employed to obtain accurate estimates of the required probability with reasonable computation effort. Based on the observation and the results of application, it nay be concluded that Importance Sampling Method is a very effective tool for the system reliability analysis.

• Journal of Korean Society for Atmospheric Environment
• /
• v.14 no.5
• /
• pp.507-518
• /
• 1998

A field comparison study was carried out to quantify differences among various sampling and analytical methods for volatile organic compounds (VOCs) at a site in Vlsan in June 1997. Air sampling containers (SUMMA canisters) were used by the Korea Institute of Science and Technology (KIST) and adsorption tubes (carbotrap) were used by Yeungnam University (YN Univ.) for sampling ambient air. Duplicate samples obtained by KIST were analyzed by KIST with a GC-MS system for aromatics and halogenated hydrocarbons and by Atm AA with a GC -FID system for C2∼C9 hydrocarbons, respectively. The adsorption tube samples were analyzed by YN Univ. with a GC-FID system for aromatics. VOC levels for the duplicate canister sampls analyzed by KIST and Atm AA were in good agreement. Concentrations of aromatics by the adsroption tube method were generally higher than those by the canister sampling method by factor of 1.5 to 2.0. Differences between the two sampling methods were discussed.