• Journal of Korean Society for Atmospheric Environment
• /
• v.13 no.2
• /
• pp.147-159
• /
• 1997

One of the most critical problems associated with filter-pack data comparisons from various field networks is the use of different sampling flow rates. In this field study, the effects of various filter-pack(FP) sampling conditions were examined. Experiments were conducted to evaluate the effects of varying sampling flow rates (1.5 to 10 sLpm) on measured concentrations of dry acid deposition species. Collocated FP samples were also collected to determine sampling and analysis data reproducibility. Ambient air samples were collected simultaneously for the seven day durations at varous flow rate. The chemical species measured were sulfur dioxide ($SO_2$), particulate sulfate(P-$SO_{4}^{2+}$), nitric acid ($HNO_3$), and particulate nitrate (P-$NO_{3}^{-}$). The results indicated that the collocated samples can be measured reproducibly and that sampling bias for the species measured is not significant. It was concluded that variations in the flow rates (1.5 to 10 sLpm) did not significantly affect the concentration of the species of interest. Although the results were not significantly different between different flow rates, artifacts were more likely to occur at high flow conditions (>5 sLpm) (e.g., via volatilization of particulate nitrates) than at low flow conditions(<5 sLpm).

• Journal of Korean Society for Atmospheric Environment
• /
• v.16 no.2
• /
• pp.113-120
• /
• 2000

Effects of sea-salts on the properties of aerosol collected in a coastal region were studied by applying a gas-particle equilibrium model SCAPE to the measurement data from Korea Cheju Island in summer 1994. It was found that the observed higher ammonium concentrations in fine particles (PM2.5) than in TSP were caused by forced evaporation of ammonium in coarse fraction of aerosol by sea-salts and the degree of evaporation was quantified through an application of SCAPE. By subtracting the sea-salt fraction from the measured concentra-tions the changes of aerosol property were also studied. The concentrations of nitrate at both TSP and PM2.5 decreased when alkaline sea-salt fraction was removed from the measured data. Estimates of aerosol acidity increased for most samples with sea salt loadings, However in some cases with high mass fractions of sea-salt components the aerosol acidity of PM2.5 decreased slightly. This is though to be related with the formation of solid salt with the removal of sea-salts.

• Investigative Magnetic Resonance Imaging
• /
• v.18 no.2
• /
• pp.87-106
• /
• 2014

Purpose : To describe how a robust implementation of a radial 3D gradient-echo sequence with stack-of-stars sampling can be achieved, to review the imaging properties of radial acquisitions, and to share the experience from more than 5000 clinical patient scans. Materials and Methods: A radial stack-of-stars sequence was implemented and installed on 9 clinical MR systems operating at 1.5 and 3 Tesla. Protocols were designed for various applications in which motion artifacts frequently pose a problem with conventional Cartesian techniques. Radial scans were added to routine examinations without selection of specific patient cohorts. Results: Radial acquisitions show significantly lower sensitivity to motion and allow examinations during free breathing. Elimination of breath-holding reduces failure rates for non-compliant patients and enables imaging at higher resolution. Residual artifacts appear as streaks, which are easy to identify and rarely obscure diagnostic information. The improved robustness comes at the expense of longer scan durations, the requirement for fat suppression, and the nonexistence of a time-to-center value. Care needs to be taken during the configuration of receive coils. Conclusion: Routine clinical use of radial stack-of-stars sequences is feasible with current MR systems and may serve as substitute for conventional fat-suppressed T1-weighted protocols in applications where motion is likely to degrade the image quality.

• Korean Journal of Optics and Photonics
• /
• v.7 no.4
• /
• pp.348-356
• /
• 1996

A mobile CARS spectrometer is constructed to measure the instantaneous temperature of gases, of which software include the quick fit methods and a least square fitting method to obtain temperatures from the spectra. Two quick-fit-methods give smaller variance of temperatures than the least square fitting method even though they consume much shorter time to yield temperatures. The precision and accuracy of CARS temperature is measured in the graphite tube blackbody furnace in reference to a radiation pyrometer. The accuracy of the CARS temperature is $\pm$2% from 1000K to 2400K and the precision is $\pm$35K at 1600K with the most accurate quick-fit-method. As a demonstration of the instantaneous measurement, the spectrometer is applied for measurement of the turbulent combustion at a certain condition. eograms(HS) are made using a relatively small number of synthesized 2D images. The influence of aliasing artifacts caused by insufficient or improper sampling is presented, and a new sampling theory is proposed, which is used to making holographic stereograms. Also, the optical system for extension of viewing distance and viewing zone is proposed. Results of this analysis can be applied to design normal holographic stereograms and computer based holographic stereograms.

• Journal of Korean Society for Atmospheric Environment
• /
• v.27 no.6
• /
• pp.734-745
• /
• 2011

In this article, we reviewed the monitoring status of hazardous VOC in ambinet air in Korea and some developed countries such as USA, Japan, and UK. In many countries, two types of VOC monitoring stations are being operated, i.e., for hazardous VOC and photochemical VOC. Each country has different target VOC but all includes benzene. Korea, Japan, and UK have a national ambient air quality standard for benzene, but no national standard has been established in the USA. For sampling of the hazardous VOC, the adsorbent method is adopted in Korea and UK, while the canister method is used in the USA. Both of adsorbent and canister methods are used in Japan. USA and UK have only non-automatic method to measure the hazardous VOC, and the individual samples are being sent to their national laboratories for integrated analysis. On the other hand, Korea and Japan have automatic and nonautomatic methods to measure the hazardous VOC. Local governments or regional environmental agencies in Korea and Japan have the authorization for the sampling and analysis of VOC. According to a field study to evaluate the performance of automatic VOC monitoring system, controlling the moisture in the air sample was identified as the most important problem. However, careful attention must be given to using a moisture removing device such as Nafyon dryer, because of unexpected artifacts formation. In order to have reliable data, it is highly recommended not only to use internal standards, but to use appropriate hydrophobic adsorbents as a cold trap in any automatic on-line VOC monitoring system.

• Journal of Digital Contents Society
• /
• v.18 no.8
• /
• pp.1517-1522
• /
• 2017

Among single image SR techniques, the TV based SR approach seems most successful in terms of edge preservation and no artifacts. But, this approach achieves insufficient SR for texture component. In this paper, we proposed a new TV-G decomposition based SR method to solve this problem. We proposed the SVR based up-sampling to get better edge preservation in the structure component. The NNE used the relaxed constraint to improve the NE. We used the NNE based learning method to improve the resolution of the texture component. Through experimental results, we quantitatively and qualitatively confirm the improved results of the proposed SR method when comparing with conventional interpolation method, ScSR, TV and NNE.

• Journal of KIISE:Computer Systems and Theory
• /
• v.34 no.4
• /
• pp.158-167
• /
• 2007

Indirect illumination plays an important role for realistic image synthesis. We present a novel realtime indirect illumination rendering technique using image pyramids. Hundreds of thousands of indirect point light sources are stored into images, and then they hierarchically clustered into quad-tree image pyramids. We also introduce a GPU based top-down and breadth-first traversal of the quad-trees to approximate the illumination with clusters (set of lights). All steps entirely run on the GPU in real-time. Result images demonstrate that our method represents diffuse interreflection, especially a color bleeding effect well. We achieved interactive frame rates of tens to hundreads, without any preprocessing. We can avoid artifacts caused by sampling, and our method is seven times faster than a recently proposed sampling based method.

• Journal of Broadcast Engineering
• /
• v.23 no.3
• /
• pp.431-436
• /
• 2018

In this paper, a simple but effective algorithm to reduce the computational complexity of thumbnail generation and to improve image quality without aliasing artifacts is proposed. For the high speed decoding, the proposed algorithm performs partial decoding per $4{\times}4$ boundary in TU(Transform Unit), and preforms TU boundary in PU(Prediction Unit). The proposed method defines the weights based on intra prediction directions and estimates the thumbnail pixel by using that weights. this method remains thumbnail extraction time and improves thumbnail image quality compared with conventional algorithms.

• Journal of Multimedia Information System
• /
• v.7 no.3
• /
• pp.231-238
• /
• 2020

This work presents a fully analog baseline wander tracking and removal circuitry using high-pass filter (HPF) based R-peak detection and quadratic interpolation that does not require digital post processing, thus suitable for compact and low power long-term ECG monitoring devices. The proposed method can effectively track and remove baseline wander in ECG waveforms corrupted by various motion artifacts, whereas minimizing the loss of essential features including the QRS-Complex. The key component for tracking the baseline wander is down sampling the moving average of the corrupted ECG waveform followed by quadratic interpolation, where the R-peak samples that distort the baseline tracking are excluded from the moving average by using a HPF based approach. The proposed circuit is designed using CMOS 0.18-㎛ technology (1.8V supply) with power consumption of 19.1 ㎼ and estimated area of 15.5 ㎟ using a 4^th order HPF and quadratic interpolation. Results show SNR improvement of 10 dB after removing the baseline wander from the corrupted ECG waveform.

• Journal of KIISE
• /
• v.43 no.4
• /
• pp.399-403
• /
• 2016

Deferred Shading is a shading technique that postprocesses pixels in the screen space, following geometry-only rendering passes with depth buffering. Unlike typical shadow mapping techniques, this technique allows us to render shadows from multiple light sources without changing the structure of the rendering pipelines. This paper presents a deferred shadow mapping technique and its extension to soft shadows using mipmapping. Our technique first generates visibility maps from light sources, and blurs the visibility maps for deferred shading. This strategy leads to efficient soft-edged shadows, but does not incorporate depth variation, producing light bleeding to some extent. In order to suppress the light-bleeding artifacts, we also propose a depth-adaptive mipmap sampling technique in the screen space.