• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.375-375
• /
• 2023

본 연구는 농지를 대상으로 토양수분 및 가뭄 현황을 분석하는 데 그 목적이 있다. 토양수분을 파악하기 위해 Terra MODIS(Moderate Resolution Imaging Spectroradiometer) 위성영상기반의 토양수분 산정모형을 개발하였다. 해당 모형은 MODIS LST(Land Surface Temperature) 및 NDVI(Normalized Difference Deficit Index)를 기반으로 SCS-CN(Soil Conservation Service-Curve Number) 방법에서 착안한 수문학적 개념 5일 선행강우 및 무강우일수를 입력자료로 하며, 토양 종류 및 계절에 따른 토양수분의 특성을 고려하였다. 모형의 개발을 위해 MODIS LST 및 NDVI 영상을 2013년부터 2022년까지 각각 일별 및 16일 단위로 구축하였으며, 동 기간에 대해 전국 88개소의 기상청 종관기상관측소의 강수량 및 LST 자료를 수집하였다. MODIS LST는 실측 LST 자료를 활용해 조건부합성기법을 적용하여 상세화하였고, 수집된 강수량자료는 역거리가중법을 활용해 공간 보간을 수행하였다. 토양특성의 구분은 농촌진흥청에서 정밀토양도를 수집하여 활용하였다. 공간 분포된 토양수분에서 농지에 해당하는 토양수분을 추출하기 위해 스마트팜맵을 구축하고, 농지 속성에 해당하는 위치 정보를 조회 후 이를 시군구별로 평균하여 일별 평균 토양수분값을 산정하였다. 토양수분 기반의 가뭄 현황 분석을 위해 구축된 정밀토양도에서 작물 생장과 관련된 영구위조점 및 포장용수량을 활용해 5단계(정상, 관심, 주의, 경계, 심각)의 가뭄 위험도를 산정하였으며, 실제 가뭄 현황과의 비교를 통해 토양수분기반의 가뭄 위험도의 실효성을 검증하고자 한다.

• Journal of Soil and Groundwater Environment
• /
• v.11 no.6
• /
• pp.61-68
• /
• 2006

Soil washing techniques coupled with high pressure air jet were applied for diesel-contaminated soils sampled by an underground oil reservoir of which the initial total petroleum hydrocarbon (TPH) ($2,828{\pm}206\;mg/kg$) exceeded 5 times of current standard level (500 mg/kg) regulated by the Soil-Environment Conservation Law. Through several tests, we found that the position of impeller has a critical impact for washing efficiencies. The highest washing efficiency was obtained at an oblique angle (30 degree) for the impeller and optimized mixing speed (300 rpm) that could have high shearing forces. Considered economical and feasible aspects, the optimum mixing time was 10 min. Rate constants of TPH removal derived from the first-order equation were not linearly increased as mixing speed increased, indicating that mechanical mixing has some limits to enhance the washing efficiencies. Application of high-pressure air jet in washing process increased the washing efficiency. This increase might be caused by the fact that the surface of micro-air bubbles strongly attached hydrophobic matters of soil particles. As the pressure of air jet increased, the separation efficiencies of TPH-contaminated soil particles increased. In the combined process of high-pressure air jet and mixing by impeller, the optimum mixing speed and air flow-rate were determined to be 60 rpm and $2\;kg/cm^2$, respectively. Consequently, the washing technique coupled with high-pressure air jet could be considered as a feasible application for remediating petroleum-contaminated soils.

• Economic and Environmental Geology
• /
• v.53 no.2
• /
• pp.197-212
• /
• 2020

This study was carried out material characteristics and firing conditions for some potteries in early and middle Neolithic period at the Munamri sites, where the first farmland remails were found in Korea. It is divided into six kinds of surface patterns for potteries such as the raised, bamboo tube and red painted (patternless) from the early Neolithic period (BC 4000 to 6000), and the patterns of horizontal herringbone, short slanted lined or lattice and incised thick line in the middle Neolithic period (BC 3000 to 4000), respectively. Based on the color measures, redness and yellowness of potteries were relatively high as condition of oxidation firings, were also observed black cores on the cross section of potteries. The firing temperature is divided into two groups having under 800℃ and 800to 900℃, the difference in patterns of the potteries are not confirmed. As a microtextures, the bamboo tube pattern potteries show the sericitization biotite, the quartz have developed a suture line textures, and altered alkali feldspars are occurred. X-ray diffraction analysis shows that the main minerals contained in potteries are chlorite and amphibole besides quartz, alkali feldspar and biotite. Considering the geology around the Munamri area is the biotite amphibole granite and soil layers within 10km radius are used as the raw materials for the potteries. The raw materials are presumed that the sources from the metamorphic rocks along the water systems through the mountains around the sites on the basis of well developed suture line textured quartz in potteries. Results on normalized geochemical compositions, the potteries by surface patterns are very similar to sources, and it is judged that was made by using the surrounding soils despite the long time difference from the early to middle in the Neolithic period.

• Journal of Conservation Science
• /
• v.19
• /
• pp.19-30
• /
• 2006

Alteration of physical and chemical characteristics and the effect of removal of mineral substances in waterlogged archaeological woods by different cleaning processes were examined using oak wood(Quercus spp.) that was excavated from wetland near Gwangju, Korea. Cleaning methods employed in the present work were (1) tools, (2) deaeration, (3) EDTA and (4) ultrasonic cleaning, which are being currently applied in the field of preservation treatment. Cleaning process were performed independently or continuously. Composition of mineral substances in the waterlogged archaeological wood was almost same as the that of soil in which waterlogged archaeological woods were buried. In case of independent cleaning, tools cleaning efficiently removed the mineral substances on surface. Surface color become brighter after cleaning with EDTA. In contrast, deaeration and ultrasonic cleaning did not show any significant removal of mineral substances. In continuous cleaning process, tool cleaning as the first step treatment showed the same effect as shown in independent cleaning. Although deaeration as the second step cleaning did not remove the mineral substances, it could be assumed to contribute the infiltration of dimensional agents by homogenization of wood. EDTA treatment (the third step cleaning) removed the iron(Fe) and increased the whiteness of wood color. The ultrasonic treatment (the fourth step cleaning) removed the sodium(Na) remained after EDTA treatment and the fine mineral substances.

• Korean Journal of Soil Science and Fertilizer
• /
• v.31 no.3
• /
• pp.225-232
• /
• 1998

In order to monitor the degree of heavy metal distribution in upland cultivations in Korea, both the cultivated soils and crops were collected from the 854 and 140 sites, respectively. The contents of cadmium (Cd), copper(Cu), lead(Pb), and zinc(Zn) in each sample were measured by Inductively Coupled Plasma(ICP) technique after 1N-HCl extraction. The content of Arsenic(As) was also measured with the same technique after 1N-HCl extraction. The average contents of heavy metal in surface soils(0~15 cm depth) were $0.135mg\;kg^{-1}$ for Cd, $2.77mg\;kg^{-1}$ for Cu, $3.47mg\;kg^{-1}$ for Pb, $10.7mg\;kg^{-1}$ for Zn, and $0.57mg\;kg^{-1}$ for As. Heavy metal contents of soil were similar to those values measured for upland soils in 1989, lower than soils under plastic film house in 1996. However, these contents were lower than "Countermeasure values for soil contamination"(Cd: 4, Cu: 125, Pb: 300, and As: $15mg\;kg^{-1}$ in soil) describled in Soil Environmental Conservation Act in Korea(1996). The contents of heavy metal in fresh vegetable, and root and tuber crops ranged $0.005{\sim}0.019mg\;kg^{-1}$ for Cd, $0.20{\sim}1.03mg\;kg^{-1}$ for Cu, $0.042{\sim}0.104mg\;kg^{-1}$ for Pb, and $2.0{\sim}4.0mg\;kg^{-1}$ for Zn, respectively.

• Journal of Korean Society of Forest Science
• /
• v.13 no.1
• /
• pp.67-78
• /
• 1971

The measures of contour-terracing with sod has been executed as a major measures for hillside erosion control works for a long time in Korea. It is, however, recognized that pair terracings make a new slope-face having the more steeper degree of slope between the upper and the lower terraces on hillsides and it also does not contribute for establishing the natural vegetation-cover by penetration of pioneer seeds on the slope faces or cut-faces of hillsides. The study was therefore conducted in connection with the above problems on the cut-face having slope of $40^{\circ}$ and 1.6 meter in slope length with clay soils. Plot allocation for the experiment consists of 3 kinds of 3 replica plots having each $1.6m^2$ of slope area, i. e., the control plot with direct seeding on slopes only ($T_1$), the covering plot with the straw-mats after seeding on slopes ($T_2$) and the seeding plot after covering with the straw-mats. ($T_3$). The main results obtained may be summarized as follows : 1. Effects of the straw-mat mulchings on surface soil loss control:-The total amount of soil losses from each treatments are measured as 4,651 gr from $T_1$, 163 gr. from $T_2$ and 2,891 gr. from $T_3$ treatment respectively. (Refer to table No. 2, 3 and 4). In short, it is recognized that effect of $T_2$ treatment is compared as 28.5 times than that of $T_1$ treatment and 17.7 times than that of $T_3$ treatment respectively. Effect of $T_3$ treatment compared with $T_1$ treatment is also such recognizable as 1.6 times in control of surface soil losses on a slope face. 2. Effect of the straw-mat mulchings on soil moisture content on slopes; -Average per cent of surface soil moisture content by treatments show as 21.60 at the $T_1$, 23.04 at the $T_2$ and 22.21 at the $T_3$ treatment respectively and that of subsurface soil moisture content by treatment show as 23.81 at the $T_1$, 26.16 at the $T_2$ and 24.81 at the $T_3$ treatment respectively. The variance of soil moisture content by treatments was highly significant (Refer table No. 7, 8 and 9). 3. Effect of the straw-mat mulchings on vegetation establishment;-Average numbers of germination by treatments are counted as 237 Nos. at the $T_1$, 246 Nos. at the $T_2$ and 262 Nos. at the $T_3$ treatment plots and the vegetation coverage on ground was almost same as about 90% of covers in all treatments. This effect is more or less lower than that of surface soil erosion control. 4. Regarding the effect on surface soil erosion control, the straw-mat mulchings would be effective as a new measures for control of soil erosion on erosion susceptible lands such slope-faced bare-lands as cut-fill faces, mass-movement faces and bare hillsides.

• Korean Journal of Environmental Agriculture
• /
• v.31 no.2
• /
• pp.122-128
• /
• 2012

BACKGROUND: Mine drainage from metal mining districts is a well-recognized source of environmental contamination. Oxidation of metal sulfides in mines, mine dumps and tailing impoundments produces acidic, metal-rich waters that can contaminate the local surface water and soil. METHODS AND RESULTS: This experiment was carried out to investigate the pollution assessment of heavy metal on the water quality of mine drainage, paddy soils and sediment in lower watershed affected by mine drainage of the Sambo mine. The average concentrations of dissolved Cd (0.018~0.035 mg/L) in mine drainage discharged from the main waste rock dumps(WRD) was higher than the water quality standards (0.01 mg/L) for agricultural water in Korea. Also, the average concentrations of dissolved Zn, Fe and Mn were higher than those of recommended maximum concentrations (Zn 2.0, Fe 5.0, Mn 0.2 mg/L) of trace metal in irrigation water proposed by FAO (1994). The average contents of Pb and Zn in paddy soils was higher than those of standard level for soil contamination(Pb 200, Zn 300 mg/kg) in agricultural soil by Soil Environmental Conservation Act in Korea. Also, the concentrations of Cd, Pb and Zn in sediment were higher than those of standard level for soil contamination (Cd 10, Pb 400, Zn 600 mg/L) in waterway soil by Soil Environmental Conservation Act in Korea. The enrichment factor (EFc) of heavy metals in stream sediments were in the order as Cd>Pb>Zn> As>Cu>Cr>Ni. Also, the geoaccumulation index (Igeo) of heavy metals in stream sediments were in the order as Zn>Cd>Pb>Cu>As>Cr>Ni, specially, the geoaccumulation index (Igeo) of Zn (Igeo 3.1~6.2) were relatively higher than that of other metals in sediment. CONCLUSION(s): The results indicate that stream water and sediment were affected by mine drainage discharged from the Sambo mine at least to a distance of 1 km downstream (SN-1, SN-2) of the mine water discharge point.

• Journal of Korean Society of Forest Science
• /
• v.35 no.1
• /
• pp.47-55
• /
• 1977

As the development of national lands increase, the necessity to develop less favorable terrain also increases. It also becomes more difficult and complicated to provide access that is both economical and safe from contributing to soil erosion on roadsides and to londscape damages. Because of the increased and justified emphasis upon environmental degradation, proper stabilization of the cut-and bank slopes of roadsides, plant sites and building sites in Korea requires careful planning as well as execution of the constructions. All fill slopes should be compacted to a degree consistent with design standards and material properties. Drainage facilities should be provided to prevent damaging concentrations of surface runoff and to avoid high pore pressures in cuts and fills. All surfaces of cut-fill slopes should be revegetated with suitable species as soon as possible after construction. To stabilize the cut-fill slopes of highway roadsides should be considerded the factor of stabilization as well as landscape conservation especially. Such basic influences as the effects of vegetations on water balance of rain fall, on the control of surface erosion and on the surface slope failures are briefly discussed in the report.

• Economic and Environmental Geology
• /
• v.37 no.5
• /
• pp.569-583
• /
• 2004

The rock properties of the West pagoda in the Gameunsaji temple site are composed mainly of dark grey porphyritic granodiorite with medium grained equigranular texture and developed with small numerous dioritic xenoliths. These xenoliths occurred with small holes due to different weathering processes. As a weathering results, the rock properties of this pagoda occur wholly softened to physical hardness because of a complex result of petrological, meteorological and biological causes. Southeastern part of the pagoda deteriorated seriously that the surface of rock blocks showed partially exfoliations, fractures, open cavities in course of granular decomposition of minerals, sea water spray and crystallization of salt from the eastern coast. The Joint between blocks has small or large fracture cross each other, contaminated and corrupted for inserting with concrete, cement mortar, rock fragments and iron plates, and partially accelerated coloration and fractures. There are serious contamination materials of algae, fungus, lichen and bryophytes on the margin and the surface on the roof stone of the pagoda, so it'll require conservation treatment biochemically for releasing vegetation inhabiting on the surface and the discontinuous plane of the blocks because of adding the weathering activity of stones and growing weeds naturally by soil processing on the fissure zone. Consisting rock for the conservation and restoration of the pagoda would be careful choice of new rock properties and epoxy to reinforce for the deterioration surfaces. For the attenuation of secondary contamination and surface humidity, the possible conservation treatments are needed.

• Journal of Korean Society of Forest Science
• /
• v.24 no.1
• /
• pp.1-24
• /
• 1974

A national programme of erosion control for soil and water conservation needs to be based on factual information about rates and quantities of soil erosion and of water runoff. The best and simplest way of reducing sedimentation pollution is to prevent or control the erosion at its sources. Steeply sloping earth banks are liable to both surface erosion and land-slides and the key to the control of these form of erosion lies with drainages and dense vegetation establishment including surface mulching on the slopes. Micro-plots having $1.6m^2$ (1 metre in width and 1.6 metres in slope length, and 1:1.2 in gradient) of banking slopes on the coarse sand soil are used to establish the order of magnititude of the difference in controlling of soil erosion and water runoff, and in potentiality of execution in consideration of the values of landscapes, performed on the 2 repetetions of six-experiment plots consisted of five surface mulches including seedings and one bare slope as a control treatment. The main results obtained may be summarized as follows: 1. The significant difference is realized in the quantities of soil erosion between the measures of six treatments. 2. Excepting the differences between treatment III and VI, the significant difference is realized in the rate of surface runoff between each treatment measures. 3. Both measures of treatment II and IV are recognized as the most effective measures in controlling the soil erosion and water runoff and also in establishing the ground vegetation. (Treatment II is a measures of the coarse straw-mat mulchings on the micro-strip seedings, Treatment IV is a measures of the "SPRAY-ON method" on the micro-strip seedings). In consideration of the potentiality of execution as well as the value of landscapes, the measures of treatment II could be recommendable for establishing the vegetation cover on the denuded gentle slopes in hillsides while the measures of treatment IV could be suitable for accelerating the establishment of vegetation on steeply sloping earth banks and cuts.