• Water for future
• /
• v.25 no.4
• /
• pp.51-59
• /
• 1992

Recently the pysically based precipitation model was developed by Geogakakos and Bras(1984) for the storm event. This is a modified version of the model. In a different way from the model, in this paper, it is emphasized that the hyderometeor size distribution(HSD)is subject to rainfall intensity and effects on the productivity of precipitation. The to HSD functions are applied to the equation of the outflow after mass through the cloud top and base, products of rainfall rate at the ground level, storage of cloud layer. As an input we put the meterological data observed at Chonju in Korea in our models and adjust the parameters included in it. The result show that in the model there is significant deviation between the hourly calculated rainfall rate and the observed data, while it is very small in the our model based on the two HSD.

• The Korean Journal of Applied Statistics
• /
• v.29 no.5
• /
• pp.887-896
• /
• 2016

The Neyman-Scott Rectangular Pulse (NSRP) model is used to model the hourly rainfall series. This model uses a modest number of parameters to represent the rainfall processes and underlying physical phenomena such as the arrival of a storm or rain cells. In this paper, we proposed approximated likelihood function for the NSRP model and applied the proposed method to precipitation data in Seoul.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.298-298
• /
• 2021

본 연구에서는 국내 6개 지역 서울, 강릉, 대전, 광주, 부산, 제주의 30년 치 시강우 자료에 해석적 확률모형(Analytical Probabilistic Models) 방법을 적용하여 도시 홍수 저감을 목적으로 하는 저류시설 설계를 위한 유출량 예측 정도를 지역별로 비교하고자 하였다. 강우 사상 분포의 해석적 확률모형을 적용하기 위해 무강우 시간을 결정하여 독립 호우를 결정하는데, 자기상관계수와 변동계수를 활용한 무강우 지속시간의 산정(IETD, Interevent Time Definition) 방법을 사용하였다. 해석적 확률모형인 유출량의 확률밀도함수(PDF, Probability Density Function)를 유도하기 위해서 불투수 지역과 투수 지역의 영향을 고려하여 유출계수를 적용하는 강우-유출 관계를 가지고 유출량을 정의하였다. 강우량, 강우 지속시간, 무강우시간과 같은 강우특성은 1변수 지수함수의 PDF를 따른다고 가정하였다. 확률모형 방법의 적합성을 판단하기 위해 결정된 IETD에 따라 각 지역별로 실제 강우 사상을 해석적 모델과 연속모의실험인 SWWM(Storm Water Management Model)에 적용하여 불투수율에 따른 유출량을 산정하였다. 각 방식으로 얻은 유출량 결과는 모든 지역에서 매우 유사하게 나타났고 결론적으로 우리나라에서 도시 홍수 저감을 위한 저류시설의 계획과 설계에 확률모형 방법이 적용 가능하다는 것을 확인할 수 있었다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.18 no.4
• /
• pp.348-359
• /
• 2006

The city of Mokpo suffers lowland inundation damages by sea water flooding even without harsh weather like a typhoon, due to the low level urban infrastructure facilities, oceanic environmental changes by constructions of seadike/seawall and sea level rise caused by global warming. This study performs constructing the simulation system which employs the MIKE21 software. And the system is applied to several typhoon- induced surges which had resulted in inundation at Mokpo. Virtual situation of flooding is simulated in case 59 cm of surge height, which had been occurred actually by RUSA(0215), coincides with Approx. H.H.W. Then the water level of 545 cm corresponds to the extreme high water level(544 cm) for 10 year return period after the construction of Geumho seawall. The results show rapid and broad inundation at Inner-Port, requiring additional preparations for flood protections.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.1
• /
• pp.14-22
• /
• 2015

In order to analyze the flow and pollutant runoff characteristics of industrial area, SWMM (Storm Water Management Model) was applied. The model was calibrated based on the measured data in the waterway of Sihwa industrial complex during six events, 2008-2009. The build-up process of pollutants is expressed as Power-linear form and washoff as Power-Exponential form. The validated model was used to analyze the change of the runoff characteristics in the industrial area. In the study area, runoff flow is decreased with an increase in impervious area, but there is no significant change in peak time. The results of this study will be used as basic information of impervious area reduction and watershed management in industrial areas.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.6 no.2 s.21
• /
• pp.51-60
• /
• 2006

The objective of this research is to develop a least cost system design method for branched storm sewer systems while satisfying all the design constraints using heuristic techniques such as genetic algorithm and harmony search. Two sewer system models have been developed in this study. The SEWERGA and SEWERHS both determine the optimal discrete pipe installation depths as decision variables. Two models also determine the optimal diameter of sewer pipes using the discrete installation depths of the pipes while satisfying the discharge and velocity requirement constraints at each pipe. Two models are applied to the example that was originally solved by Mays and Yen (1975) using their dynamic programming(DP). The optimal costs obtained from SEWERGA and SEWERHS are about 4% lower than that of the DP approach.

• Journal of Korea Water Resources Association
• /
• v.39 no.7 s.168
• /
• pp.593-603
• /
• 2006

The basin response to storm is regarded as nonlinearity inherently. In addition, the consistent nonlinearity of hydrologic system response to rainfall has been very tough and cumbersome to be treated analytically. The thing is that such nonlinear models have been avoided because of computational difficulties in identifying the model parameters from recorded data. The parameters of nonlinear system considered as dynamic effects in the conceptual model are optimized as the sum of errors between the observed and computed runoff is minimized. For obtaining the optimal parameters of functions, the historical data for the Bocheong watershed in the Geum river basin were tested by applying the numerical methods, such as quasi-linearization technique, Runge-Kutta procedure, and pattern-search method. The estimated runoff carried through from the storage function with dynamic effects was compared with the one of 1st-order differential equation model expressing just nonlinearity, and also done with Nash model. It was found that the 2nd-order model yields a better prediction of the hydrograph from each storm than the 1st-order model. However, the 2nd-order model was shown to be equivalent to Nash model when it comes to results. As a result, the parameters of nonlinear 2nd-order differential equation model performed from the present study provided not only a considerable physical meaning but also a applicability to Korean watersheds.

• Journal of Environmental Impact Assessment
• /
• v.24 no.2
• /
• pp.163-174
• /
• 2015

Urbanization caused various environmental problems like destruction of natural water cycle and increased urban flood. To solve these problems, LID(Low Impact Development) deserves attention. The main objective of LID is to restore the water circulation to the state before the development. In the previous studies about the LID, the runoff reduction effect is mainly discussed and the effects of each techniques of LID depending on rainfall types have not fully investigated. The objective of this research is to evaluate the effect of LID using the quantitative simulation of rainwater runoff as well as an amount of infiltration according to the rainfall and LID techniques. To evaluate the water circulation of LID on the development area, new land development areas of Hanam in South Korea is decided as the study site. In this research, hydrological model named STORM is used for the simulation of water balance associated with LID. Rainfall types are separated into two categories based on the rainfall intensity. And simulated LID techniques are green roof, permeable pavement and swale. Results of this research indicate that LID is effective on improvement of water balance in case of the low intensity rainfall event rather than the extreme event. The most effective LID technique is permeable pavement in case of the low intensity rainfall event and swale is effective in case of the high intensity rainfall event. The results of this study could be used as a reference when the spatial plan is made considering the water circulation.

• Journal of Korea Water Resources Association
• /
• v.54 no.7
• /
• pp.463-474
• /
• 2021

The various external forces can cause inundation in coastal areas. This study is to analyze regional characteristics caused by single or compound external forces that can occur in coastal areas. Storm surge (tide level and wave overtopping) and rainfall were considered as the external forces in this study. The inundation analysis were applied to four coastal areas, located on the west and south coast in Republic of Korea. XP-SWMM was used to simulate rainfall-runoff phenomena and 2D ground surface inundation for watershed. A coupled model of ADCIRC and SWAN (ADCSWAN) was used to analyze tide level by storm surge and the FLOW-3D model was used to estimate wave overtopping. As a result of using a single external force, the inundation influence due to storm surge in most of the coastal areas was greater than rainfall. The results of using compound external forces were quite similar to those combined using one external force independently. However, a case of considering compound external forces sometimes created new inundation areas that didn't appear when considering only a single external force. The analysis considering compound external forces was required to reduce inundation damage in these areas.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.37 no.1
• /
• pp.65-72
• /
• 1995

This paper describes the applications of the SCS TR-20 hydrologic model for simula- tion of hourly inflow rates from sixty-six ungaged tributaries and subareas between the Naju station and the estuarin dam at the Yongsan River Basin. The model was tested for the ungaged conditions with fifteen storm events at Naju station. Hourly simulated run- off data were compared with the observed, and the results showed less correlationships between the two data than those from TANK model. The coefficients of correlation ranged from 0.74 to 0.87. The curve numbers and time of concentration were defined from topographic dta for each of sixty-six tributaries for the estuarine dam and used for TR-20 applications. The results were within an acceptable range of errors in simulating the inflow fluctuations for the flood forecasting at the estuarine dam.