• Journal of The Korean Astronomical Society
• /
• v.34 no.4
• /
• pp.237-241
• /
• 2001

Our goal is to present a simple volume-of-fluid type interface-tracking algorithm to compressible two-phase flow in two space dimensions. The algorithm uses a uniform underlying Cartesian grid with some cells cut by the tracked interfaces into two subcells. A volume-moving procedure that consists of two basic steps: (1) the update of volume fractions in each grid cell at the end of the time step, and (2) the reconstruction of interfaces from discrete set of volume fractions, is employed to follow the dynamical behavior of the interface motion. As in the previous work with a surface-tracking procedure for general front tracking (LeVeque & Shyue 1995, 1996), a high resolution finite volume method is then applied on the resulting slightly nonuniform grid to update all the cell values, while the stability of the method is maintained by using a large time step wave propagation approach even in the presence of small cells and the use of a time step with respect to the uniform grid cells. A sample preliminary numerical result for an underwater explosion problem is shown to demonstrate the feasibility of the algorithm for practical problems.

• Proceedings of the KIEE Conference
• /
• 1997.07c
• /
• pp.903-906
• /
• 1997

When large capacity generation stations that consist of several large units tend to pull out of step from main power system, stabilizing control scheme as emergency control for preventing loss of synchronism of the whole stations with the remaining system is devided into two steps that the first step is to perform on-line prediction for out-of-step and the next step is on-line calculation of the amount of generation shedding for the rest of generators to be in step when out of step is expected. This paper presents on-line prediction scheme for out-of-step based on P-$\delta$ curve estimation using real-time measurement and on-line calculation of generation shedding. The proposed stabilizing scheme was applied to case study of real power system and the results obtained by the method compare well with the results by simulation.

• Journal of The Korean Astronomical Society
• /
• v.42 no.3
• /
• pp.61-69
• /
• 2009

Transverse velocity vectors can be determined from a pair of images successively taken with a time interval using an optical flow technique. We have tested the performance of the new technique called NAVE (non-linear affine velocity estimator) recently implemented by Chae & Sakurai using real image data taken by the Narrowband Filter Imager (NFI) of the Solar Optical Telescope (SOT) aboard the Hinode satellite. We have developed two methods of estimating the errors in the determination of velocity vectors, one resulting from the non-linear fitting ${\sigma}_{\upsilon}$ and the other ${\epsilon}_u$ resulting from the statistics of the determined velocity vectors. The real error is expected to be somewhere between ${\sigma}_{\upsilon}$ and ${\epsilon}_u$. We have investigated the dependence of the determined velocity vectors and their errors on the different parameters such as the critical speed for the subsonic filtering, the width of the localizing window, the time interval between two successive images, and the signal-to-noise ratio of the feature. With the choice of $v_{crit}$ = 2 pixel/step for the subsonic filtering, and the window FWHM of 16 pixels, and the time interval of one step (2 minutes), we find that the errors of velocity vectors determined using the NAVE range from around 0.04 pixel/step in high signal-to-noise ratio features (S/N $\sim$ 10), to 0.1 pixel/step in low signa-to-noise ratio features (S/N $\sim$ 3) with the mean of about 0.06 pixel/step where 1 pixel/step corresponds roughly to 1 km/s in our case.

• Physical Therapy Korea
• /
• v.14 no.4
• /
• pp.66-74
• /
• 2007

The aim of the present study was to investigate age-related differences in stepping behavior in response to sensory perturbations of postural balance. The participants for this study were 2 healthy elderly adults (mean age=76.0) and 2 younger adults (mean age=25.5). Subjects were asked to step over a 10 cm high obstacle at self-paced speed with the right limb to land on the primary target (normal step length) that is 10 cm in diameter. However, if, during movement, the light was illuminated, then the subject had to step on the secondary target (long step length). It was planned that the onset of the light would be prior to peak Fx of swing limb, between swing peak Fx and swing toe-off, and after swing toe-off. In the younger adults these secondary visual cues were provided at mean times of 240 ms (standard deviation (SD)=11), 402 ms (SD=13), and 476 ms (SD=88) following the movement onset. Corresponding mean times for the healthy elderly were 150 ms (SD=67), 352 ms (SD=39), and 562 ms (SD=115). Results showed great changes in both group and visual cue condition in Fx ground reaction forces and temporal events following the swing toe-off. Swing limb acceleration force (Fx) and stance peak Fx1 was much greater in the young adults compared to the older adults. Both young and older adults increased stance peak Fx2 in the visual cue condition compared to normal stepping. There was no difference in stance peak Fx2 between the visual cue conditions in both groups. Similarly, the time to stance peak Fx2 was much longer for the visual cue condition than for the normal stepping. It was not different between the visual cue conditions in the young adults, but in the elderly mid and late cue was much greater than early cue. In addition, time to stance peak Fx2 and swing and stance time were much longer in the older adults compared to the young adults for the visual cue conditions. These results suggest that unlike young adults, elderly adults did not flexibly modify their responses to unexpected changes in step length while stepping over obstacles.

• The Journal of the Korea Contents Association
• /
• v.15 no.12
• /
• pp.370-377
• /
• 2015

This study attempted to examine the impact of musculoskeletal pain on pedestrian crossing using a sample that consisted of 282 aged people. The research method involved an examination of the musculoskeletal pain of the elderly using a musculoskeletal questionnaire. The subjects were also told to walk across four- and six-lane pedestrian crossings while their gait velocity, step count, and step time were measured. The research results for pain by body regions indicated that waist pain had the highest complaint rate(33.3%). When there was musculoskeletal pain in the waist and leg/foot, gait velocity also decreased and step count and step time increased. However, usage of a cane turned out to have a positive impact on pedestrian crossing. Nevertheless, no significant relationship between waist and leg/foot pain and pedestrian crossing characteristics was found. We expect there will be continuous further studies on the subject of diverse physical problems of the aged and pedestrian crossing.

• The Journal of Korean Physical Therapy
• /
• v.23 no.3
• /
• pp.21-27
• /
• 2011

Purpose: The purpose of the present study was to examine, in stroke patients, differences between backward walking training applied on a treadmill and the same training applied on the ground. Methods: Twenty seven stroke patients were divided into a treadmill backward walking group of 14 patients and a ground backward walking group of 13 subjects. Each group performed their respective training method for 8 weeks (15 min per day, 4 days a week). Walking ability was measured using a 10 m MWS (Maximal Walking Speed) test and the GAITRite system to examine changes in walking. Cadence, stridelength, step time, step length and symmetry index of the less affected side were measured to examine changes in stance phase of the lower extremity of the more affected side. Results: 10 m MWS, cadence, stride length, step time and step length of the less affected side significantly increased and symmetry index significantly decreased after training in both groups. The treadmill backward walking group experienced a significantly greater increase in step time and step length and a significantly greater decrease in symmetry index than the ground backward walking group. Conclusion: The two walking training methods were effective for improving stability in stance phase of the lower extremity of the more affected side, but the treadmill method was more effective. The present study is meaningful in that it analyzed the effects of backward walking training methods on walking and the differences of the training methods to provide information necessary for effective treatment of stroke patients.

• Journal of Aerospace System Engineering
• /
• v.15 no.5
• /
• pp.89-97
• /
• 2021

STEP Cube Lab-II (Cube Laboratory for Space Technology Experimental Project-II) is a 6U Cube satellite equipped with optical and infrared cameras for monitoring Mt. Paektu volcanic eruption signs and earth observation in the Korean peninsula. To guarantee successful mission operation of the cube satellite in orbit, thermal design is essential for the electronic equipment, and must be kept within the allowable temperature range during the mission period. Thus, it is necessary to analyze the predictable orbital thermal environment. The STEP Cube Lab-II is launched through the KSLV-II, however, the operation orbit has not been determined due to the unknown launch time. In this study, we performed a thermal analysis of the satellite and investigated the heat flux according to launch time to analyze the worst orbital conditions that could occur.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.173.2-173.2
• /
• 2016

A two-step oxidation method was applied on Al6061 to debate the growth mechanism of plasma electrolytic oxidation (PEO) coating. The specimens were first oxidized in the primary electrolyte solution {$Na_3PO_4$ (8g/l), NaOH (2g/l), consequently, the specimens were transferred into a different electrolyte {$K_2ZrF_6$ (8g/l), NaOH (2g/l), $Na_2SiF_6$ (0.5g/l)} for further oxidation. The processes was conducted for various processing times. It was found the second step electrolyte component were reached to inner layers, in contrast to the primary step components which were thrustle to the outer layer. The presence of the secondary component in the inner layers were significantly varied with processing time which suggest the change in growth properties with processing time. further more the inside growth of the secondary component confirmed the increasing trend in the downward growth of the coating layer. The corrosion and hardness properties of the coatings were found highly improved with change in growth features with increasing the processing time.

• Journal of Korean Institute of Industrial Engineers
• /
• v.27 no.1
• /
• pp.69-88
• /
• 2001

In the zigzag milling operation, an important issue is to design a machining strategy which minimizes the cutting time. An important variable for minimization of cutting time is the tool path length. The tool path is divided into cutting path and non-cutting path. Cutting path can be subdivided into tool path segment and step-over, and non-cutting path can be regarded as the tool retraction. We propose a new method to determine the cutting direction which minimizes the length of tool path in a convex or concave polygonal shape including islands. For the minimization of tool path length, we consider two factors such as step-over and tool retraction. Step-over is defined as the tool path length which is parallel to the boundary edges for machining area and the tool retraction is a non-cutting path for machining any remaining regions. In the determination of cutting direction, we propose a mathematical model and an algorithm which minimizes tool retraction length in complex shapes. With the proposed methods, we can generate a tool path for the minimization of cutting time in a convex or concave polygonal shapes including islands.

• Korean Journal of Optics and Photonics
• /
• v.3 no.2
• /
• pp.117-122
• /
• 1992

2-color 3-step resonance photoionization scheme has been used for selective photoionization of mercury isotopes. The levels of $6^3P_1$ and $6^1D_2$ were selected as intermediate excited levels, and the laser wavelengths used were 253.7 nm for the first excitation and 313.2 nm for the second excitation and ionization. Selective excitation for individual isotope was realized in the first excitation step with a single-longitudinal-mode (SLM) dye laser rrf ~700 MHz linewidth. For the second excitation and ionization step, a dye laser with relatively large linewidth of ~5 GHz was used. In this work the effect of laser intensities on isotope selectivity was analyzed from the mass spectra obtained in real time from the time-of-flight mass spectrometer.