• Asian Journal of Turfgrass Science
• /
• v.20 no.1
• /
• pp.25-31
• /
• 2006

'Meyer' zoysiagrass(Zoysia japonica Steud.) is a popular turfgrass species used for transition zone golf course fairways and tees in mfd U.S.A golf courses because it is generally winter hardy while providing an excellent playing surface with minimal chemical and irrigation inputs. However, its functionality declines easily in many of the shaded areas of these courses. Reduced irradiance causes excessive shoot elongation, reduced tillering, and weak plants that are poorly suited to tolerate or recover from traffic and devoting. Trinexapac-ethyl (TE) effectively reduces gibberellic acid (GA) biosynthesis and subsequent shoot cell elongation. This study was initiated to evaluate TE effect on shoot elongation and stand persistence under two levels of shade in 'Meyer' zoysiagrass. A mature stand of 'Meyer' was treated with all combinations of three levels of shade(0%, 79%, and 92%) and three levels of monthly TE [0, 48 $g{\cdot}ha^{-1}$ a.i(0.5x) and 96 $g{\cdot}ha^{-1}$ a.i(1x)]. In full sun, the TE at 48 $g{\cdot}ha^{-1}$ a.i reduced clipping yield by 18% over a four-week period and, whereas the TE at 96 $g{\cdot}ha^{-1}$ a.i by 30% to 38%. Monthly application of TE at the 96 $g{\cdot}ha^{-1}$ a.i increased 'Meyer' tiller density in full sun and under 79% shade. Both rates of TE consistently reduced shoot growth under shade relative to the shaded control. Only the monthly applications of the TE at 96 $g{\cdot}ha^{-1}$ a.i consistently delayed loss of quality under 79% shade. Our results indicate TE can be an effective management practice to increase 'Meyer' zoysiagrass persistence in shaded environments.

• Journal of Korean Society of Forest Science
• /
• v.94 no.1 s.158
• /
• pp.26-33
• /
• 2005

The study was carried out to provide information about growth and ecological characteristics by site types of natural deciduous forest in Pyeongchang, Gangwon Province. The data were collected from four aspects(the East, the West, the South, and the North) with three elevation(higher than 1.000 m, 700~1,000 m, lower than 700 m) and three topographical conditions(ridge, hill, and valley). Growth parameters by site types were evaluated based on the growth performances of dbh for the last 5 to 10 years; which were also estimated based on both Pressler and Schneider formulae. In addition, ecological characteristics such as Shannon-Wiener's diversity index, evenness index and richness index were analyzed by site types. The management methods by site types were suggested by considering stand density, growth patterns, and ecological characteristics. It was found that the stands on the South and the East are necessary the tending practices to improve growth and ecological characteristics. On the other hand, the West and the North needed the tending practices focusing on stand density management to increase growth rate rather than ecological management. It was also found that the area lower than 700 m in elevation showed Higher growth rate than other areas. As a management standard considered in terms of growth rate, it was suggested that tending practices should be applied to the stands of which growth rate for the last 5 to 10 years were lower than 2%. Considering topographical conditions, valley area showed better ecological characteristics than both ridge and hilly areas. Consequently, it was revealed that the valley areas were suitable for the ecological management.

• Korean journal of applied entomology
• /
• v.15 no.1 s.26
• /
• pp.7-16
• /
• 1976

In order to increase utility efficiency of red wood ants, Formica rufa truncicola var. yessonesis Forel as a resource of natural enemy of pine caterpillar, Dendrolimus spectabilis Butler, by finding out ecological and environmental factors in the habitat of red wood ants, the nest distribution and its density in habitat, plant distribution and density, stand-density of red pine, nest building and fixing plants, relative humidity of surface soil, physical and chemical natures of soil, and breeding rate were examined. The obtained results are summarized as follows: 1. The nest of red wood ants was densely distributed, in the lower-and middle top of mountain but no nest was found in the top. 2. The economical distribution of nest of habitat was estimated as $2.85/m^2$ and the lowest density as $1.93/m^2$ and these estimation lead us to confirm that pine caterpillar could be controlled. 3. The ecological characteristics of habitat seemed to be represented as higher stand-density of red pine of 10-20 years of age with large areas of eroded land under trees. The major grasses prevailing in this area were Andropogon brevifolius. Arundinella hirta, Miscanthus purpurasens, Eulia speciosa, Themeda japonica, Cymbopogon goeringii, and Eccoilpus cotulifer 4. Red wood ants seemed to build the nest by using red pine, Arundinella hirta, Miscanthus purpurascens, Themeda japonica or Cymbopogon goeringii as a fixing plant. 5. The limited point of humidity percent in habitat of red wood ants was estimated as $76\%$ during the acting period of May to September and as $72\%$ during pre-period of hibernation of October to November. 6. Soil analysis in habitating region showed higher concentration of organic matters and lower concentration of calcium and magnesium, and habitat was largely composed of silt and fine sand rather than coarse sand. 7. When the separated colony was transplanted to non-habitating red pine forest that seemed to have the similiar conditions as those of habitat, propagation and establishment of nest was possible.

• Journal of Korean Society of Forest Science
• /
• v.99 no.6
• /
• pp.914-921
• /
• 2010

This study analyzed the above-and belowground biomass, net primary production, stem density, and biomass expansion factors for Pinus densiflora stands of Cheongyang and Boryeong regions in Chungnam. The total dry weights in Cheongyang and Boryeong regions were 122.36 kg/tree and 137.68 kg/tree while the aboveground biomass for these two regions were 72.23 Mg/ha and 143.27 Mg/ha, respectively. Total(above-and belowground) biomass were 91.77 Mg/ha and 178.98 Mg/ha, respectively. Net primary production of above-and belowground biomass in Cheongyang and Boryeong regions were 8.69 Mg/ha, 10.03 Mg/ha, 16.00 Mg/ha and 18.66 Mg/ha, respectively. Stem density (g/$cm^3$) was 0.457 and 0.421 while the above and total biomass expansion factors were 1.394~1.662 and 1.324~1.639, respectively. These results suggested that stand density and site quality could be influenced on the biomass and net primary production of the two regions. In addition, the results of this study could be very useful to calculate carbon sequestrations by applying stem density values and biomass expansion factors for Pinus densiflora in these two regions.

• Weed & Turfgrass Science
• /
• v.6 no.3
• /
• pp.196-202
• /
• 2017

This study was conducted to investigate the change of yield and quality according to seeding time and planting density and to determine effective weed control method in wet-hill-seeding use black colored rice. The most effective weed control system was application of bromobutide thiobencarb five days before seeding followed by bensulfuron mefenacet thiobencarb 12 days after seeding (barnyardgrass at 2.5-3.0 leaf stage). The seedling stand by seeding time and planting density increased with the delay seeding time and high planting density. The heading dates were delayed as the seeding time became late but no difference was found between planting density. The anthocyanin content of black colored rice was higher at late seeding time and lower planting density. The yield of full colored rice was high 80 plants per $3.3m^2$ in seeding on May 30 and June 10. This information could be useful for spreading rice direct seeding by inducing stabilization of wet-hill-seeding use black colored rice.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.30 no.1
• /
• pp.11-17
• /
• 2002

This paper compares the difference between the village groves in the Jinan settlement region and the Hamyang settlment region in Honam and the Youngnam mountainous region. The results are as follows: Fifty-one village groves in the Jinan legion were found and 40 village groves were found in the Hamyang region. It was established that the village groves in the Jinan region of Honam province were conserved better than those of Hamyang region of Youngnam province. In the Jinan area, the village groves were principally found in the Jinan-eup and the Hamyang regions, primarily in Seosang-myun and Aneui-myun. So it was determined that the village groves were distributed inequitably in the two regions. In L / W ratio, the Jinan region is 3.6 and Hamyang region is 2.0 Jinan is 1.8 times greater than Hamyang. Therefore, it was concluded that Jinan is stronger than Hamyang in linear function of the village groves. Stone stooge for complementation function was found in 11 village groves in the Jinan region and 6 village groves in Hamyang. So the percentage of the remaining stone storage is 15-20 % of all village groves. Regarding grove makeup, the village gloves in Jinan region is deciduous forest principally. In contrast, the groves of Hamyang are principally coniferous forest. The dominant tree of the Jinan-gun region is Zelkova serrata, but in Hamyang it is Pinus densiflrora. By number, Hamyang region has two times the trees than Jinan region. In density of stand, the Hamyang region is 76.2% higher than Jinan region. In height and diameter of trees, the Jinan region is greater than the Hamyang region. It was identified that RSI of both region is 40%. So in density of trees, both region are sparse. This paper has a limit in ideiltiting the differences between Yolmg-nam ar\ulcorner Hnam village groves because comparative review only examined two regions.

• Journal of Korean Neurosurgical Society
• /
• v.54 no.6
• /
• pp.496-500
• /
• 2013

Objective : To evaluate the successful fusion rate in postmenopausal women with single-level anterior cervical discectomy and successful fusion (ACDF) and identify the significant factors related to bone successful fusion in pre- and postmenopausal women. Methods : From July 2004 to December 2010, 108 consecutive patients who underwent single-level ACDF were prospectively selected as candidates. Among these, the charts and radiological data of 39 women were reviewed retrospectively. These 39 women were divided into two groups : a premenopausal group (n=11) and a postmenopausal group (n=28). To evaluate the significant factors affecting the successful fusion rate, the following were analyzed : the presence of successful fusion, successful fusion type, age, operated level, bone mineral density, graft materials, stand-alone cage or plating with autologous iliac bone, subsidence, adjacent segment degeneration, smoking, diabetes mellitus, and renal disease. Results : The successful fusion rates of the pre- and postmenopausal groups were 90.9% and 89.2%, respectively. There was no significant difference in the successful fusion rate or successful fusion type between the two groups. In the postmenopausal group, three patients (10.8%) had successful fusion failure. In the postmenopausal group, age and subsidence significantly affected the successful fusion rate (p=0.016 and 0.011, respectively), and the incidence of subsidence in patients with a cage was higher than that in patients with a plate (p=0.030). Conclusion : Menopausal status did not significantly affect bone successful fusion in patients with single-level ACDF. However, in older women with single-level ACDF, the combination of use of a cage and subsidence may unfavorably affect successful fusion.

• Journal of Environmental Impact Assessment
• /
• v.10 no.2
• /
• pp.123-133
• /
• 2001

Gaussian dispersion model is the most widely used tool for the ground level air pollution simulation. Though in spite of the convenience there are important problems on the Pasquill- Gifford' stability classification scheme which was used to define the turbulent state of the atmosphere or to describe the dispersion capabilities of the atmosphere which was each covers a broad range of stability conditions, and that they were very site specific, and the vertical dispersion calculation formula on the case of the unstable atmospheric condition. This paper was carried out to revise the Gaussian dispension model for the purposed of increase the modeling performance and propose the revised model, which was composed of the turbulent characteristics in the unstable atmospheric conditions. The proposed models in this study were composed of the profile method, Monin-Obukhove length, the probability density function model and the lateral dispersion function which was composed of the turbulent parameters, $u_*$(friction velocity), $w_*$(convective velocity scale), $T_L$(lagrangian time scale) for the model specific. There were very good performance results compare with the tracer experiment result on the case of the short distance (<1415m) from the source, but increase the simulation error(%) to stand off the source in the all models. In conclusion, the revised Gaussian dispersion model using the turbulent characteristics may be a good contribution for the development of the air pollution simulation model.

• Asian Journal of Atmospheric Environment
• /
• v.9 no.4
• /
• pp.288-297
• /
• 2015

In this study, wind conditions and its energy potential have been assessed by conducting a Weibull analysis of the wind speed data (over the period of 2002-2011) measured from a port city (Mongla) and an isolated island (Sandwip) in Bangladesh. The monthly mean wind speed at Mongla ranged from 1.60 m/s (December) to 2.47 m/s (April). The monthly values of Weibull shape parameter (k) were from 1.27 to 2.53. In addition, the values of the scale parameter (c) and the monthly wind power density ranged from 1.76 to 2.79 m/s and 3.95 to $17.45W/m^2$, respectively. The seasonal mean wind speed data varied from 1.72 (fall) to 2.29 m/s (spring) with the wind power density from 5.33 (fall) to $14.26W/m^2$ (spring). In the case of Sandwip, the results were comparable to those of Mongla, but moderate reductions in all the comparable variables were observed. The wind data results of these two areas have been compared with those of eight other locations in the world with respect to wind power generation scale. According to this comparison, the wind power generation scale for Mongla and Sandwip was adequate for stand-alone small/micro-scale applications such as local household consumption, solar-wind hybrid irrigation pumps, and battery charging.

• Journal of Environmental Science International
• /
• v.12 no.3
• /
• pp.265-274
• /
• 2003

The Pasquill-Gifford stability category is a very important scheme of the Gaussian type dispersion model defined the complex turbulence state of the atmosphere by A grade(very unstable) to F grade(very stable). But there has been made a point out that this stability category might decrease the predictability of the model because it was each covers a broad range of stability conditions, and that they were very site specific. The APSM (Air Pollution Simulation Model) was composed of the turbulent parameters, i.e. friction velocity(${\mu}$$\_$*/), convective velocity scale($\omega$$\_$*/) and Monin-Obukhov length scale(Ｌ) for the purpose of the performance increasing on the case of the unstable atmospheric conditions. And the PDF (Probability Density Function)model was used to express the vertical dispersion characteristics and the profile method was used to calculate the turbulent characteristics. And the performance assessment was validated between APSM and EPA regulatory models(TEM, ISCST), tracer experiment results. There were very good performance results simulated by APSM than that of TEM, ISCST in the short distance (<1415 m) from the source, but increase the simulation error(%) to stand off the source in others. And there were differences in comparison with the lateral dispersion coefficient($\sigma$$\_$y/) which was represent the horizontal dispersion characteristics of a air pollutant in the atmosphere. So the different calculation method of $\sigma$$\_$y/ which was extrapolated from a different tracer experiment data might decrease the simulation performance capability. In conclusion, the air pollution simulation model showed a good capability of predict the air pollution which was composed of the turbulent parameters compared with the results of TEM and ISCST for the unstable atmospheric conditions.