• Journal of the Korean Society for Precision Engineering
• /
• v.1 no.2
• /
• pp.41-46
• /
• 1984

The machinability of calicium-deoxidized steel is studied in turning by being compared with that of Fe-Si deoxidized steel under a given set of cutting condition. Tool life, cutting force and cutting mechanism are examined on a few sorts of steel. It is found that adhesive layer "Belag" is developed on the cemented carbide tool and the peak value is observed at the cutting speed of 300m/min followed by gradual increase in the thickness of Belag with the increase of cutting speed. the maximum thickness of Belag is also shown at the feed of 0.3mm/rev. On the other hand, the tool life of carbide tool is more favorable than that of high speed steel (SKH 9) in cutting calcium- deoxidized steel. It is considered that the steel deoxidized with Ca-Si shows better machinability a little than that with Fe-Si. However, the cutting force and the shear angle of the former are similar to those of the latter in turning.n turning.

• MALSORI
• /
• no.41
• /
• pp.73-81
• /
• 2001

This paper reports the results of an experimental phonetic study of intonation contrasts perception by speakers of British English, Japanese and Russian. Six series of re-synthesized two-syllable rise-fall contours with manipulated parameters of the rise in the first and the fall in the second syllable were employed in the experiment. Modifications of pitch height were executed in 2 st steps, and of duration in 30ms steps. The subjects, who were native speakers of British English, Japanese and Russian, identified the sentence type of presented re-synthesized stimuli. The results of the experiments demonstrate overall similarity of the perception strategies across the three groups of subjects, especially regarding the thresholds of declarative' sentence type judgement. Non-declarative judgements are more language-specific. The results can be employed for the teaching of English, Japanese and Russian as foreign languages as well as for speech synthesis and recognition.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.9 no.3
• /
• pp.35-41
• /
• 2010

In this study, a mode analysis of uncoupled system was discussed using FRF. The eigen-mode range of FRF analysis is consistent with conventional FFT in spectrum. Also, the numerical response of second order uncoupled system was obtained using the Runge-Kutta Gill method. The displacement, velocity and acceleration response were calculated after numerical analysis and its response was used for the calculation of FRF for uncoupled system. Using the separated and mixed response of 1st and 2nd mode in example, its FRF was analysed for the prediction of the uncoupled systems and its mode shape was calculated by solving the eigen problem.

• Journal of Trauma and Injury
• /
• v.30 no.2
• /
• pp.63-65
• /
• 2017

Standard open procedures for resection of the first rib in thoracic outlet syndrome can prove to be quite difficult with extensive incisions. A minimal invasive procedure can also be painstaking, but provides an attractive alternative to the more radical open procedures. We report the details of the technique with direct video footage of the procedure performed in a 41-year-old man with thoracic outlet syndrome done entirely by thoracoscopic methods.

• Journal of Korean Neurosurgical Society
• /
• v.41 no.5
• /
• pp.333-335
• /
• 2007

A 56-year-old woman presented with the numbness and pain in the left hand in the 1st, 2nd and 3rd finger area that developed suddenly 7 days prior to admission. In nerve conduction velocity test, the deterioration of nerve conduction velocity as well as the reduction of the potential amplitude were detected. After diagnosis of carpal tunnel syndrome, the open median nerve release was performed. Nonetheless, the preoperative symptoms did not change. The magnetic resonance images [MRI] of brain revealed a cerebral infarction in sensoricortical area of parietal lobe. The patient was referred to the department of neurology, and after conservative treatment, her symptoms were improved.

• Smart Structures and Systems
• /
• v.14 no.3
• /
• pp.367-376
• /
• 2014

Ambient vibration techniques are nowadays a very popular tool to assess dynamic properties of buildings. Due to its non destructive character, this method is particularly valuable, especially for health monitoring of historical monuments. The present ambient vibration experiment consists on the evaluation of vibration modes of a Medieval tower. Situated in Soncino (close to Cremona, in the Northern Italian region named Lombardia), the tower of 41.5 meters height has been monitored by seismometers located at different points inside the structure. Spectral ratios of the recorded ambient vibrations clearly identify a fundamental mode at about 1 Hz, with a slight difference in the two horizontal components. A second mode is also evidenced at approx 4-5 Hz, with a moderate degree of uncertainty. The records of a ML 4.4 earthquake, occurred during the monitoring period, confirm the information obtained by microtremor analysis. Daily variations of both 1st and 2nd mode were detected: these variations, of an amount up to 2%, seem to be well related with the temperature.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.12 no.2
• /
• pp.41-47
• /
• 1990

Treatment of infected mandibular fractures is confronted with various difficult problem, e.g. eradication of infection and osseous union even in the presence of devastating infection. To solve this problem various methods were proved including exteranal fixation, IMF and plating with some success. Author treated 3 cases of infected mandibular fractures with champy's miniplate. 1. Satisfactory union was obtained in 3 cases. 2. In One case, pus drainage continued even after internal fixation with miniplate, but it was easily controlled using proper antibiotic therapy & drainage. 3. In Case 3, autogenous bone graft was implanted into the infected fracture site to fill defect.

• Research in Community and Public Health Nursing
• /
• v.21 no.1
• /
• pp.12-20
• /
• 2010

Purpose: The purpose of this study was to identify the predictors of health-related quality of life and to examine their effects in frail elderly. Methods: This was a correlation study. The subjects were 680 frail elders aged over 65 who were receiving home care from one of 253 public health centers in 16 provinces, and data were collected from the 1st to 30th of April, 2008. Results: The mean health-related quality of life in the subjects was $6.0{\pm}2.0$. The predictors identified in this study significantly explained 41.3% of health-related quality of life. Self-rated health was the most significant predictor of health-related quality of life. ADL and depression had an effect on health-related quality of life. Conclusion: Self-rated health, ADL and depression were the predictors of health-related quality of life in the frail elderly.

• Journal of the Korean Institute of Educational Facilities
• /
• v.16 no.3
• /
• pp.41-48
• /
• 2009

The purpose of this research is to find out the problem of plan composition by use the school building. The research was performed through the checking of 13 high schools which were built after 1997 in Busan. Followings are the result of the research. Presently, all the schools are divided classes into different levels and teach students, however, it is only limited to English and Mathematics and being carried on mostly for 1st graders. Moreover, although the plan is composed Department System plan which intended to ues new various learning method, schools have changed their plan into Usual with Variation type which is old educational program and renovated a few classes for certain subjects. Due to above reasons, the new kinds of space for Department System plan is used only as a study room by reform or even not used at all. Therefore, improvement of those problems are significant in schools.

• Publications of The Korean Astronomical Society
• /
• v.18 no.1
• /
• pp.37-41
• /
• 2003

We have developed a seeing monitoring system and measured seeing variation of the Bohyunsan Optical Astronomy Observatory (BOAO) and the Sobaeksan Optical Astronomy Observatory (SOAO) using a small telescope system. Our seeing monitoring system is similar to the differential image motion monitor (DIMM) installed at the ESO. The ooly difference between the BOAO and the SOAO seeing monitoring system is a detector system, a video camera at the BOAO and ST-4 camera at the SOAO. We confirmed that the seeing monitoring system at the SOAO can measure average seeing size inspite of its simple detector system. From the BOAO seeing measurement, we found that the seeing size changes fast. We expect that our seeing monitoring system could be used for real time seeing monitoring after some improvement, and the data to be obtained would be very useful when we build adaptive optic system in the future.