• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.3 s.357
• /
• pp.20-25
• /
• 2007

The periodic domain-inversion in the selective areas of $Ti:LiNbO_3$ Mach-Zender waveguides was performed and band-pass modulators and single sideband (SSB) modulators were fabricated by using domain-reversal. The domain wall velocity was precisely controlled by real-time analysis of a poling-induced response current under an applied voltage. The domain wall velocity was significantly affected by the crystal orientation of the domain wall propagation which influenced the final domain geometry. In a certain case, the decomposition of $LiNbO_3$ crystal was observed, for example, under the condition of too fast domain wall propagation. The fabricated band-pass modulator with a periodic domain-inversion structure showed the maximum modulation efficiency at 30.3 GHz with 5.1 GHz 3dB-bandwidth, and SSB modulator was measured to show 33 dB USB suppression over LSB at 5.8 GHz RF.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.4
• /
• pp.105-113
• /
• 2010

In this paper, a 1.485 Gbps video signal transmission system using the carrier frequency of 240 GHz band was designed and simulated. The sub-harmonic mixer based on Schottky barrier diode was simulated in the transmitter and receiver. Both of heterodyne and direct detection receivers were simulated for each performance analysis. The ASK modulation was used in the transmitter and the envelop detection method was used in the receiver. The transmitter simulation results showed that the RF output power was -11.4 dBm($73{\mu}W$), when the IF input power was -3 dBm(0.5 mW) at the LO power of 7 dBm(5 mW) in sub-harmonic mixer, which corresponds to SSB(Single Side Band) conversion loss of 8.4 dB. This value is similar to the conversion loss of 8.0 dB(SSB) of VDI's commercial model WR3.4SHM(220~325 GHz) at 240 GHz. The combined transmitter and receiver simulation results showed that the recovered signal waveforms were in good agreement to the transmitted 1.485 Gbps NRZ signal.

• Journal of Food Hygiene and Safety
• /
• v.34 no.4
• /
• pp.388-395
• /
• 2019

The object of the present study was to examine the effect of selenium-treated Spinacia oleracea L. on antioxidative defense system and oxidative damage in rats fed high-fat and high-cholesterol diets. Experimental rats were divided into six groups which were composed of normal diet group (N), high-fat and high-cholesterol diet group (HF), high-fat and high-cholesterol diet with 5% or 10% non-treated spinach supplemented group (SPA or SPB) and high-fat and high-cholesterol diet with 5% or 10% selenium-treated spinach-supplemented group (SSA or SSB). In the antioxidant enzyme activities of hepatic glutathione peroxidase and superoxide dismutase, activities increased in supplementation of non-treated or selenium-treated spinach groups compared to HF group. However, there was no significant difference in the activity of hepatic catalase among all experimental groups. The microsomal superoxide radical content of the SSB group was significantly reduced compared to the HF group. The mitochondrial carbonyl values of the SSB group were significantly reduced compared to the HF group. Thiobarbituric acid reaction substance (TBARS) values in RBC and liver were also reduced in non-treated or selenium-treated spinach-supplemented groups compared to the HF group. The hepatic TBARS values of the supplementation of selenium-treated spinach groups significantly decreased compared to the supplementation of non-treated spinach groups. These results suggest that selenium-treated spinach may reduce oxidative damage by the activation of antioxidative defense system in rats fed high-fat and high-cholesterol diets.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.9 no.5
• /
• pp.1-9
• /
• 2006

The purpose of this study is to make a design guideline in designing constructed wetland which can treat water quality both of point and nonpoint source water pollution. It focuses on structural aspects of two case studies of constructed wetland applying SSB(Sustainable Structured wetland Biotope) system in Korea. The constructed wetland of Lake Ju-am which was constructed in 2002 by Environmental Management Corporation, was designed by applying SSB system. It shows higher removal efficiency than expected - 56% of BOD removal efficiency, 60% of T-N removal, and 76% of T-P removal efficiency. In two cases, total wetland areal extents were calculated referred to treatment efficiency. The system is consist of micro-cell structures : inflow channel, forebay, multiple wetland cells and micro-pool. When designing constructed wetland appropriate in local area, the total organic system of vertical and horizontal structure : geology, hydrology, land use, and ecological surroundings of the sites should be considered totally.

• Journal of the Semiconductor & Display Technology
• /
• v.6 no.1 s.18
• /
• pp.17-22
• /
• 2007

Recent new packages such as MCP(Multi-Chip Package), QDP(Quadratic Die Package) and DDP(Dual Die Package) have stack type configuration. This kind of multi-layer package is thicker than single layer package. So there is need for the low height looping technology in wirebonder to make these packages thinner. There is stiff zone above ball in wirebonder wire which is called HAZ(Heat Affect Zone). When making low height loop (below $80\;{\mu}m$) with traditional forward loop, stiff wire in HAZ(Heat Affected Zone) above ball is bended and weakened. So the traditional forward looping method cannot be applied to low height loop. SSB(stand-off stitch) wire bonding method was applied to many packages which require very low loops. The drawback of SSB method is making frequent errors at making ball, neck damage above ball on lead and the weakness of ball bonding on lead. The alternative looping method is BNL(ball neckless) looping technology which is already applied to some package(DDP, QDP). The advantage of this method is faster in bonding process and making little errors in wire bonding compared with SSB method. This paper presents the result of BNL looping technology applied in assembly house and several issues related to low loop height consistence and BNL zone weakness.

• Coupled systems mechanics
• /
• v.8 no.1
• /
• pp.1-17
• /
• 2019

The present paper deals with delamination fracture analyses of the multilayered functionally graded non-linear elastic Symmetric Split Beam (SSB) configurations. The material is functionally graded in both width and height directions in each layer. It is assumed that the material properties are distributed non-symmetrically with respect to the centroidal axes of the beam cross-section. Sine laws are used to describe the continuous variation of the material properties in the cross-sections of the layers. The delamination fracture is analyzed in terms of the strain energy release rate by considering the balance of the energy. A comparison with the J-integral is performed for verification. The solution derived is used for parametric analyses of the delamination fracture behavior of the multilayered functionally graded SSB in order to evaluate the effects of the sine gradients of the three material properties in the width and height directions of the layers and the location of the crack along the beam width on the strain energy release rate. The solution obtained is valid for two-dimensional functionally graded non-linear elastic SSB configurations which are made of an arbitrary number of lengthwise vertical layers. A delamination crack is located arbitrary between layers. Thus, the two crack arms have different widths. Besides, the layers have individual widths and material properties.

• Journal of KIISE:Databases
• /
• v.31 no.2
• /
• pp.108-121
• /
• 2004

In this paper, we propose an enhanced snapshot technique that solves performance degradation when snapshot is initiated for the storage cluster system. However, traditional snapshot technique has some limits adapted to large amount storage shared by multi-hosts in the following aspects. As volume size grows, (1) it deteriorates crucially the performance of write operations due to additional disk access to verify COW is performed. (2) Also it increases excessively the blocking time of write operation performed during the snapshot creation time. (3)Finally, it deteriorates the performance of write operations due to additional disk I/O for mapping block caused by the verification of COW. In this paper, we propose an efficient snapshot technique for large amount storage shared by multi-hosts in SAN Environments. We eliminate the blocking time of write operation caused by freezing while a snapshot creation is performing. Also to improve the performance of write operation when snapshot is taken, we introduce First Allocation Bit(FAB) and Snapshot Status Bit(SSB). It improves performance of write operation by reducing an additional disk access to volume disk for getting snapshot mapping block. We design and implement an efficient snapshot technique, while the snapshot deletion time, improve performance by deallocation of COW data block using SSB of original mapping entry without snapshot mapping entry obtained mapping block read from the shared disk.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.9 s.174
• /
• pp.60-68
• /
• 2005

To investigate the effects of beam focusing in the etching of polymers with short pulse Excimer lasers, a polymer etching model of SSB's is combined with a beam focusing model. Through the numerical simulation, it was found that in the high laser fluence region, SSB model considering both photochemical and thermal contribution is considered to be suitable to predict the etched hole shape than a simple photochemical etching model. The average temperature distribution into the substance obtained by assuming 1-D heat transfer is found to be fairly similar to the fluence distribution on the ablated surface. The experimental etching data fur polymers are used to give material properties for ablation model. The fitted etch depth curve gives a nice agreement with the experimental data.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.10b
• /
• pp.91-93
• /
• 2003

본 논문에서는 대용랑 스토리지를 공유하는 스토리지 클러스터 시스템을 위한 매핑 테이블 기반의 스냅샷 기법을 제안한다. 스냅샷 상태 비트를 이용한 디스크 기반의 스냅샷 기법을 개선한 스냅샷 상태 테이블을 메모리에 유지하는 스냅샷 기법을 제안한다. 스냅샷 상태 테이블은 최초 할당 비트(FAB:First Allocation Bit)와 스냅샷 상태 비트(SSB:Snapshot Stautus Bit)로 구성되고 기존 스냅샷 기법이 갖는 문제점들을 해결한다. 스냅샷 생성 시 대상 저장 장치에 대한 I/O의 중단없이 데이터의 일관성을 보장한다. 또한 쓰기 연산 수행 시 COW의 수행 여부 판단을 스냅샷 상태 테이블의 FAB와 SSB를 이용하여 매핑 블록에 대한 추가적인 I/O를 없앤다. 스냅샷 삭제 시 매핑 블록에 대한 접근 없이 COW 수행 여부 판단을 처리하여 성능을 향상시킨다.

• Proceedings of the Botanical Society of Korea Conference
• /
• 1987.07a
• /
• pp.63-79
• /
• 1987

Light regulates a variety of genes in higher plants. The expression of light-induced plant genes is regulated at the level of transcription via red- light photomorphogenic receptor, phytochrome, as well as unknown blue light photoreceptor(s). Ribulose-5-phosphate carboxylase/oxygenase (Rubisco) small subunit (SSB) and light harvesting chlorophyll a/b (Cab) protein are those of the best understood genes regulated by light. 5'-upstream flanking sequence (- -400) of Rubisco SSB and Cab genes sis known as a light responsive, enhance-like element. It responses to red and blue light in transgenic plant system as a tissue specific manner. Phytochrome gene is also regulated by light. In contrast to most of the light regulated plant genes, it is negatively controlled by red light. Search for the cis- and trans-acting factors responsible for the light signal is in progress to understant photomorphogenesis and development in higher plants.