• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.988-990
• /
• 2003

Disk type Single Phase SRM(Switched Reluctance Motor) can be used axial and radial direction magnetic flux. Therefore, the energy density per unit of volume is high and the axis can be shorter than that of any other motor. In this paper, the flux-linkage was measured according as rotor positions of disk type single phase SRM, which is designed and fabricated in previous studies. From the measured data, we got the magnetization curves, inductance profile, co-energy and torque. Also, we compared the value of the measurement with the value of analysis through 3D FEM simulation.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.150-151
• /
• 2007

In hydraulic oil pump system, pressure has a linear relationship with output torque of motor. Torque control of pump drive can easily output stable pressure, and it can retain required pressure at minimum speed to save power consumption. Switched reluctance motor(SRM) has many advantages such as low cost and low inertia. It can generate high torque at low speed. But inherent high torque ripple of SRM influences performance of pressure control in hydraulic oil system. This paper presents direct instantaneous torque control(DITC) of hydraulic oil pump system. DITC method can reduce inherent torque ripple of SRM, and output smoothing torque to load. So the proposed hydraulic oil pump system can support smooth pressure and fast dynamic power supply to the hydraulic pump system. At last the proposed hydraulic oil pump system is verified by computer simulation and experimental results.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.892-893
• /
• 2007

Industrial interest in switched reluctance motor (SRM) drives has varied since 1850s. This has been primarily due to the emerging markets for variable speed drives in consumer and industrial products, such as home appliances, air conditioning, hand tools, fans, pump motor, etc. However, SRM has been plagued with the acoustic noise and vibration problem by input power of fixed section. Therefore, This paper offers operating characteristics by dynamic simulation through the generalization of inductance profile and estimation of inductance according to current. the control methode are applied from DSP(digital signal processor) with voltage reference and position detection.

• Proceedings of the KIEE Conference
• /
• 2001.10a
• /
• pp.45-47
• /
• 2001

This paper studies the relationship between output and vibration characteristics of Switched Reluctance Motor(SRM) according to switch-on and off angles. Acceleration and motor performance are measured by changing switching angles and the magnetic forces are analyzed by Finite Element Analysis. A proper switching angle from theoretical and several experimental results are presented for satisfying power, efficiency and low vibration.

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.601-603
• /
• 2002

This paper describes the design optimization of a 8:6 Switched Reluctance Motor(SRM) with the rotor pole inserted barrier. The design is focussed on the minimization of the static torque ripple as maintaining the average torque and the efficiency of the demanded value. The finite element analysis method (FEM) and the optimization algorithm are used to optimize the shape of the rotor pole. By comparing the FEM results of barrier type SRM with these of prototype, it is verified that the barrier type SRM improves the static torque characteristics.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.533-534
• /
• 2016

본 논문은 차량용 Built-in 청소기용 SRM(Switched Reluctance Motor) 드라이브 시스템 개발에 대하여 설명한다. 기존의 청소기용 모터는 대부분 영구자석을 사용하는 PMSM 또는 BLDCM이다. 그러나 영구자석의 주 원료인 희토류 광물가격의 상승으로 인해 영구자석형 모터를 대체할 비 희토류 모터(SRM)에 대한 관심이 커지고 있다. 본 논문에서는 제작된 차량용 Built-in 청소기용 SRM의 유한요소해석 데이터를 바탕으로 한 Matlab/Simulink 시뮬레이션 및 실제 실험을 통하여 가능성을 검증하였다.

• Proceedings of the KIEE Conference
• /
• 2008.04c
• /
• pp.134-136
• /
• 2008

In recent years, the switched reluctance motor have been used many industrial application because of its cost advantage. SRM drivers are accomplished by switching the phase currents on and off synchronously with the rotor position which is fed back to the controller by position may deteriorate in harsh environments and increase the size and cost of the SRM drive system. This paper proposes a position sensorless method that is based on impressed pulse voltage using impressed at unenergised phases to estimate the rotor position. The current value by impressed pulse voltage compare with the threshold value. The rotor position can be estimated by observing the current value. Finally, simulation results compare with the sensor type SRM and confirm the proposed method to be useful.

• Proceedings of the KIEE Conference
• /
• 2006.10d
• /
• pp.59-61
• /
• 2006

The single phase switched reluctance motor(SRM) is simpler in control circuit because the number of switching devices is fewer than the poly phase SRM. The energy density per unit volume is very big because all stator poles are excited simultaneously by a single switching power source. But it must be provided a starting device on account of not being generated the starting torque at specific rotor positions. And also it has some demerits that have a torque ripple, noise and vibration because of being excited by switching pulse power source. Therefore, to make up for these demerits, it is realized many studies for the structure design used by computer and the operating methods by power electronics technique. In this paper, we'll present the comparison of the single phase SRM with the various rotor pole face types, as like stepped rotor pole face type and general rotor pole face type. For the torque characteristics analysis.

• Proceedings of the KIEE Conference
• /
• 1994.07a
• /
• pp.3-5
• /
• 1994

The SRM can be operated on the high speed range in which the back-emf is greater than the DC link voltage. However, the phase current of the SRM should be controlled through the selection of an exciting angle since it can not be controlled by a chop of the DC link voltage in the high speed range. In this paper, a PI and a bang-bang controller are employed in order to control the speed of the SRM and the leading angle of the SRM is adapted as a control input. The performances of two controllers are evaluated by computer simulation. The results show that the bang-bang controller is more attractive than the PI controller in the cost and performance aspects.

• Proceedings of the KIPE Conference
• /
• 2004.07b
• /
• pp.976-980
• /
• 2004

This paper presents a position sensorless control system of Switched Reluctance Motor (SRM) using neural network. The control of SRM depends on the commutation of the stator phases in synchronism with the rotor position. The position sensing requirement increases the overall cost and complexity. In this paper, the current-flux-rotor position lookup table based position sensorless operation of SRM is presented. Neural network is used to construct the current-flux-rotor position lookup table, and is trained by sufficient experimental data. Experimental results for a 1-hp SRM is presented for the verification of the proposed sensorless algorithm.