• Journal of Surface Science and Engineering
• /
• v.37 no.6
• /
• pp.335-343
• /
• 2004

Bath stabilizers in the electroless nickel(EN) plating solution are known to prevent sudden bath decomposition and extend its lifetime. Further, every stabilizer has a different role and function in EN solution and it influences the surface structure. In this study, the effects of various stabilizers on the deposition rate, surface morphology, deposition content of phosphor and hardness were investigated.

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.381-382
• /
• 2014

하이브리드 자동차는 동력을 얻기 위해 엔진과 전동기를 모두 사용한다. 이 하이브리드 자동차의 구동부 구조는 다양한 형태로 구성할 수 있는데, 이 중 직렬-병렬 구조는 엔진의 토크 및 속도 자유도를 모두 확보할 수 있어 높은 효율을 달성할 수 있다. 직렬-병렬 구조는 발전기, 전동기, 그리고 속도 분배를 위한 유성 기어를 이용하여 주로 구현되고 있고, 최근에는 다양한 새로운 형태의 전동기가 개발되어 이를 구동부에 적용하는 것에 관한 연구가 진행되고 있다. 본 논문에서는 이 중 고정자를 회전자에 독립적으로 회전시킬 수 있는 새로운 형태의 전동기를 사용하는 구조에 관한 내용을 다룬다. 위의 전동기는 기존 구조에서 유성 기어 및 발전기의 역할을 대체하여 토크 분배 및 전기적 출력 변환을 수행할 수 있다. 또한, 회전하는 고정자에 인버터 회로를 탑재하여 슬립 링 대신 회전하는 고정자에 전력을 공급하는 방식을 제안한다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.385-386
• /
• 2007

We prepared the Al doped ZnO coating Ag multilayer thin films on glass without substrate heating using FTS system. The structure of multilayer thin films has Al doped ZnO/Ag/Al doped ZnO(AZO/Ag/AZO). The thickness of top and bottom AZO thin films were fixed to 50 nm, respectively and controlled the thickness of Ag thin films with deposition time. As-doped multilayer thin films were prepared at 1mTorr and input power (DC) of 100W at room temperature. To investigate the film properties, we employed four-point probe, UVNIS spectrometer, X-ray diffractometer (XRD), scanning electron microscopy (SEM), Hall Effect measurement system and Atomic Force Microscope (AFM).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.406-407
• /
• 2007

We prepared indium zinc oxide (IZO) thin film for cathode electrode such as an application of flat panel display by using the facing targets sputtering (FTS) method at room temperature. The effects of input power and film thickness were investigated with respect to physical and optical properties of films such as deposition rate, electrical properties, microstructure and transmittance. We could obtain properties of IZO thin films of under $10^{-3}\;{\Omega}-cm$ in resistivity and the thin films of over 90% in transmittance. Also, we obtained IZO thin films which were an amorphous structure.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1118-1119
• /
• 2007

Switched Reluctance Motor has advantages such as simple structure, low cost and so on compared with induction motor. Efficiency is higher than induction motor, so there is beneficial cost. Also torque character has essential character of superiority step motor and a DC motor character that depends on variable speed. This paper presented the research of speed and current control system of SRM using the DSP. At first, a simulation model on Matlab/simulink was performed. SRM speed control algorithm investigated the control method. Then driver and control system developed to do experiment.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07a
• /
• pp.165-168
• /
• 2004

In this study, AZO(ZnO:Al) thin film were prepared by FTS(Facing Target Sputtering) system. The electrical, optical and crystallographic properties of AZO thin film with $O_2$ gas flow ratio have been investigated. The thickness, transmittance, crystal structure and resistivity of AZO thin film were measured by a-step, UV-VIS spectrometer, XRD and four-point probe, respectively. As a result AZO thin film deposited with the transmittance over 80% and the resistivity about $10^{-1}\Omega-cm$.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.404-404
• /
• 2010

Despite much works have been done on the geometric structures of ripples, defects and edge atoms in a graphene device, there has been no report showing the direct correlation between the structures and the transport property. Unlike scanning tunneling microscopy or other electron microscopes, Scanning Gate Microscope (SGM) is a unique microscopic tool with which the local electronic structure and the transport property of a device can be measured simultaneously. We have performed a transport measurement in nanometer scale using a scanning gate microscope (SGM). We have found the nanoscopic pictures of electron and hole puddles and the role of graphene- device edges in the transport measurements. These experimental findings were successfully explained with a theoretical model.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.57-57
• /
• 2010

Self assembled $Zn_{x-1}Cd_xS$ nanowires, synthesized on a Indium tin oxide coated glass substrate with low composition of Cd as x=0.09, were fabricated non-precursor via a co-evaporation method using of solid sources of CdS and ZnS. We studies that ZnCdS nanowires are dislocation-free and the single crystalline hexagonal wurtzite structure showed by transmission electron microscopy and selected area electron diffraction pattern. Cathode luminescence spectra showed an near band edge peak at 383nm originated from nanowires at 80K and 300K. Core level spectra of the Cd 3d, Zn 2p and S 2p in the ZnCdS nanorods were obtained by x-ray photoelectron spectroscopy. Prepared ZnCdS nanorods showed different shape with increase of substrate temperature at the growth.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.218.2-218.2
• /
• 2013

In this study, CdS thin films were deposited onto glass substrates by radio frequency magnetron sputtering. The films were grown at various substrate temperatures in the range of 100 to $250^{\circ}C$. The effects of substrate temperatures on the structural and optical properties were examined. The XRD analysis revealed that CdS films were polycrystalline and retained the mixed structure of hexagonal wurtzite and cubic phase. The percentages of hexagonal structured crystallites in the films were seen to be increased by increasing substrate temperatures. The film grown at $250^{\circ}C$ showed a relatively high transmittance of 80% in the visible region, with an energy band gap of 2.45 eV. The transmittance date analysis indicated that the optical band gap was closely related to the substrate temperatures.

• Korean Journal of Materials Research
• /
• v.15 no.7
• /
• pp.431-434
• /
• 2005

To investigate the dependences of the absorption spectrum and electronic structure properties on the ZnO nano-particle size, ZnO nanocrystals were synthesized by a sol-gel method. The absorption onset peak exhibits a systematic blue-shift with decreasing particle size due to the quantum confinement effect, as well as, with decreasing $Zn^{2+}$ concentration. The increase of particle size is mainly controlled by coarsening and aggregation step during the nucleation and growth of ZnO nano-particles. The onset absorption spectrum of ZnO colloids changes from 310 to 355 nm as $Zn^{2+}$ concentration increases from 0.01 to 0.1 mole. The average particle size as a function of aging- time can be determined from the absorption spectra. The freshly prepared nanocrystal size was about 2.8nm.