• Restorative Dentistry and Endodontics
• /
• v.32 no.5
• /
• pp.426-436
• /
• 2007

The objective of this study is to evaluate the effect of an additional application of bonding resin on the bond strength of resin luting cements in both the light-cure (LC) and self-cure (SC) modes by means of the ${\mu}TBS$ tests. Three combinations of One-Step Plus with Choice, Single Bond with Rely X ARC, and One-Up Bond F with Bistite II were used. D/E resin and Pre-Bond resin were used for the additional application. Twelve experimental groups were made. Three mandibular $3^{rd}$ molars were used in each group. Indirect composite blocks were cemented on the tooth surface. $1\;{\times}\;1\;mm^2$ dentin-composite beam for ${\mu}TBS$ testing were made and tested. When total-etching dentin adhesives were used, an additional application of the bonding resin increased the bond strength (P < 0.05). However, this additional application didn't influence the bond strength of self-etching dentin adhesives (P > 0.05). In conclusion, the results suggest that an additional application of the bonding resin increases bond strength and enhances quality of bonding when using total-etching dentin adhesives.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.38 no.5
• /
• pp.33-41
• /
• 2001

The digital iron using ${\mu}$ processor is designed and compared experimentally with the conventional analog Iron. Designed digital iron shows two improved temperature control characteristics. First, the reduction of the difference error between the user setting temperature and the real temperature of the iron tip is examined. When the iron temperature is set to $200[^{\circ}C]$, $300[^{\circ}C]$, $400[^{\circ}C]$, $480[^{\circ}C]$ at the environmental temperatures of $-5[^{\circ}C]$ and $25[^{\circ}C]$, it is examined that the tip temperature is very stable and its error is within ${\pm}1.8[^{\circ}C]$. Second, it is conformed that the temperature fluctuation of the iron due to the soldering is reduced manifestly. When the temperature of iron tip is varied from $200[^{\circ}C]$ to $480[^{\circ}C]$ with 1[g] solder, the temperature errors of the analog iron are measured to be from $6[^{\circ}C]$ to $10[^{\circ}C]$. In case of designed digital iron, however, these errors are much smaller and they are from $2[^{\circ}C]$ to $5[^{\circ}C]$.

• Journal of Life Science
• /
• v.12 no.2
• /
• pp.173-181
• /
• 2002

This study was conducted to do the comparative analysis of mating type locus controlling the direct formation of fruiting body in Schizophyllum commune which is indigenous to North America with that of other identified mating locus. The 3120 bp Y-region nucleotide of A $\alpha$ 3 mating locus activating a developmental pathway in S. commune was determined, and appeared to have about 96% homology to S. commune 1-71 $A\alpha$3 allele indigenous to South America, showing strongly a conservative feature. This nucleotide analysis also showed above 96% homology highly in the seven presumed exons, and about 97% in the acidic rich region (AR), about 99% in homeodomain (H7), about 97% in the basic rich region (BR), about 95% in the serine rich region (Ser) respectively. In the comparative analysis to the translated polypeptide sequence, S. commune A $\alpha$ 3 mating locus containing Y-region also showed about 97% homology to the region of S. commune indigenous to North America, but the identity ratio to Y1 including Y4, Y5, Y6 different allele types was declined to about 41~49%. In the analysis of functional loci controlling mating activity, it is assumed to have a highly conservative feature showing about 98% homology in homeodomain polypeptide. Especially, it is notable that the homology ratio of above 85% in homeodomain motif between mating type alleles was higher than in the AR, BR, Ser showing about 10~50% homology.

• Journal of Applied Biological Chemistry
• /
• v.59 no.4
• /
• pp.365-372
• /
• 2016

The objective of the present study was to evaluate the protective effect of red ginseng (RG) according to steaming time on 150 mM HCl/60 % ethanol induced gastric ulcer models in mice. The sample was divided into 3 groups-G (dried ginseng), RG 4 (steamed 4 h and dried ginseng), RG 6 (steamed 6 h and dried ginseng), and determined through in vitro experiments, such as 1,1-diphenyl-2-picrylhydrazyl and 2,2'-azinobis-3-ethyl-benzothiazoline-6-sulfonic acid radical scavenging activity, HPLC analysis, total polyphenol, and flavonoid contents. In vitro experiment results were depended on steaming hours. Based on the results, we chose two samples (G, RG 6) and conducted in vivo experiments. Mice were divided into 5 groups: Nor (normal group), Con (acute gastritis mice treated with distilled water), G (gastris induced by HCl/Ethanol treated with 100 mg/kg G), RG 6 (gastris induced by HCl/ethanol treated with 100 mg/kg RG 6), and SC (gastris induced by HCl/Ethanol treated with 10 mg/kg sucralfate). In our results revealed that RG 6 suppressed elevated reactive oxygen species, and inflammatory related makers, such as cyclooxygenase-2, inducible nitric oxide synthase, tumor necrosis factor alpha, and interleukin-1 beta. In addition, gastric lesion area was improved. These results suggest that RG 6 protects the stomach by attenuating oxidative stress and inflammatory response under gastric ulcer conditions. Therefore, RG 6 should be a potential therapeutic agent for the treatment of acute gastric ulcer.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.2
• /
• pp.217-222
• /
• 1999

A squid viscera oil contains a high content of EPA, DHA, and other valuable polyunsaturated fatty acids. The extractions of squid viscera oil by supercritical carbon dioxide both with/without $3\%$ (v/v) ethanol were performed in a semicontinuous flow extractor at 8.3 to 13.8 MPa and 25 to $50^{\circ}C$. When ethanol was added to $SC-CO_2$, the extraction ratio of lipid increased. The extracts contained high content of unsaturated oils like DHA and EPA. The highest extraction yield of lipid from squid viscera oil extracted by supercritical carbon dioxide was obtained at 12.4 MPa and $40^{\circ}C$ with/without entrainer. The main fatty acids of squid viscera oil extracted by supercritical carbon dioxide were myristric acid (14:0), palmitic acid (16:0), palmitoleic acid (16:1), oleic acid (18:1), arachidic acid (20:0), eicosapentaenoic acid (20:5), and docosahaxaenoic acid (22:6).

• Journal of the Korean Association of Geographic Information Studies
• /
• v.7 no.2
• /
• pp.1-15
• /
• 2004

For the simulation of flow phenomenon that calculate basin outflow, it is required to estimate effective precipitation which contributes to direct runoff. This paper is focused on using detailed soil map which is one of the data required to estimate effective precipitation by SCS CN method. Korean detailed soil map must be reclassified as SCS hydrologic soil group when it is applied to SCS CN method. In this study, Korean detailed soil maps which are reclassified as SCS hydrologic soil group by the methods of Her and Jung (1987) and Jung et al. (1995) are applied to flow simulation and the results are analyzed. The study sites are Wichon watershed and Pyungchang river basin which are studied by International Hydrological Program(IHP). HEC-1 and WMS v6.1 are used to simulate flow phenomenon and calculate geographic parameters. The difference of flow analysis results from each soil reclassification method is different from each sites. But the results of flow analysis approximate observed data by using Jung et al. (1995) method more than Her and Jung (1987) method.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.47 no.4
• /
• pp.40-46
• /
• 2010

In this paper, we use the Raman spectra measured from platelet to the diagnosis of Alzheimer's disease(AD). The Raman spectra used in the experiments were preprocessed with the following method and then fed into the classifier. The first step of the preprocessing is a simple smoothing followed by background elimination to the original spectra to make it easy to measure the intensity of the peaks. The last step of the preprocessing was peak alignment with the reference peak. After the inspection of the preprocessed spectra, we found that proportion of two peak intensity at 743 and 757 $cm^{-1}$ and peak intensity at 1658 $cm^{-1}$ are the most discriminative features. Then we apply mapstd method for normalization. The method returned data with means to 0 and deviation to 1. With these two features, the classification result involving 278 spectra showed about 95.5% true classification in case of MLP(multi-layer perceptron). It means that the Raman spectra measured from platelet would be effectively used to the diagnosis of Alzheimer's disease.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.49 no.1
• /
• pp.47-56
• /
• 2012

Bicycle has a large amount of kinetic energy available for energy harvesting technology in its speedy and balanced riding movement. Systematic and realistic analysis of its dynamic property is essential to improve the efficiency of energy harvester. However, there has not been enough researches about precise measurement or analysis of bicycle dynamics on real roads. This study aims to investigate the characteristics of vibrational movement of bicycle using MEMS-based accelerometer and to develop a prototype of electromagnetic energy harvester with nonlinear behavior which is proper to the random vibrations accompanied in bicycle riding. The vibrational components have average magnitude of 1 g and turn out to be independent of riding speed. The developed prototype of energy harvester was installed on a front port of a bicycle to use this ambient vibration and generated an average electrical power of 1.5 mW which is enough to support power for most of portable sensors and short range radio-frequency communication. Further study about isolation of vibration from a rider and conversion efficiency is ongoing. The developed energy harvester is expected to be a platform technology for sustainable portable power supply for various smart IT devices and applications.

• The Korean Journal of Pesticide Science
• /
• v.19 no.1
• /
• pp.14-21
• /
• 2015

To determine residual characteristics of azoxystrobin in ginseng under different cultivation conditions such as use of straw mat on cultivation soil and filling gap between ginseng stem and soil surface and also to elucidate its approximate behavior after spraying, 20% azoxystrobin suspension concentrate solution was sprayed 4 times onto 5-year-old ginseng with 10 days interval at a application rate of about 200 L/10 a and then residues in samples were analyzed. The residue level was lower in case of use of straw mat and filling the gap with soil than in case of no use of straw mat and no filling the gap, representing that use of straw mat and filling the gap with soil were contributed to decrease of pesticide residues in ginseng. A large portion of the test pesticide distributed onto ginseng leaf with a higher specific surface area. The amounts of azoxystrobin residues decreased in ginseng leaf, while increased on soil surface, as close to harvest. About 0.1% of azoxystrobin sprayed was distributed in ginseng root and 12.7-20.4% (mean 16.6%) of azoxystrobin could be decreased for dietary intake by removing of rhizome from ginseng root before intake.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.45 no.2
• /
• pp.26-36
• /
• 2008

Due to the differential and low voltage swing, Low Voltage Differential Signaling(LVDS) has been widely used for high speed data transmission with low power consumption. This paper proposes new LVDS I/O interface circuits for more than 1.3 Gb/s operation. The LVDS receiver proposed in this paper utilizes a sense amp for the pre-amp instead of a conventional differential pre-amp. The proposed LVDS allows more than 1.3 Gb/s transmission speed with significantly reduced driver output voltage. Also, in order to further improve the power consumption and noise performance, this paper introduces an inductance impedance matching technique which can eliminate the termination resistor. A new form of unfolded impedance matching method has been developed to accomplish the impedance matching for LVDS receivers with a sense amplifier as well as with a differential amplifier. The proposed LVDS I/O circuits have been extensively simulated using HSPICE based on 0.35um TSMC CMOS technology. The simulation results show improved power gain and transmission rate by ${\sim}12%$ and ${\sim}18%$, respectively.