A Study on the Estimation of Effective Precipitation using Detailed Soil Map

정밀토양도를 이용한 유효강우량 산정에 관한 연구

  • Kim, Kyung-Tak (Water Resources Research Division, Korea Institute of Construction Technology) ;
  • Choi, Yun-Seok (Water Resources Research Division, Korea Institute of Construction Technology)
  • 김경탁 (한국건설기술연구원 수자원연구부) ;
  • 최윤석 (한국건설기술연구원 수자원연구부)
  • Received : 2004.03.17
  • Accepted : 2004.04.09
  • Published : 2004.06.30

Abstract

For the simulation of flow phenomenon that calculate basin outflow, it is required to estimate effective precipitation which contributes to direct runoff. This paper is focused on using detailed soil map which is one of the data required to estimate effective precipitation by SCS CN method. Korean detailed soil map must be reclassified as SCS hydrologic soil group when it is applied to SCS CN method. In this study, Korean detailed soil maps which are reclassified as SCS hydrologic soil group by the methods of Her and Jung (1987) and Jung et al. (1995) are applied to flow simulation and the results are analyzed. The study sites are Wichon watershed and Pyungchang river basin which are studied by International Hydrological Program(IHP). HEC-1 and WMS v6.1 are used to simulate flow phenomenon and calculate geographic parameters. The difference of flow analysis results from each soil reclassification method is different from each sites. But the results of flow analysis approximate observed data by using Jung et al. (1995) method more than Her and Jung (1987) method.

유역의 유출량을 계산하는 유출모의를 위해서는 직접유출에 기여하는 강우량인 유효강우량을 산정해야한다. 본 연구에서는 SCS CN방법을 이용하여 유효강우량을 산청하기 위해 필요한 유역의 지형자료와 토지피복도 및 토양도 중 정밀토양도의 이용에 관한 내용을 기술하고 있다. 우리나라의 정밀토양도를 SCS CN방법에 적용하기 위해서는 SCS 수문학적 토양군으로의 재분류가 필요하다. 본 연구에서는 정밀토양도를 SCS의 수문학적 토양군으로 분류할 때 허기술과 정정화(1987)의 분류기준과 정정화 등(1995)의 분류기준을 적용하여 유출모의를 수행하여 그 결과를 비교 검토하였다. 대상유역은 IHP 시범유역인 위천 유역과 평창강 유역을 선정하였다. 유출모의는 HEC-1을 이용하였으며 지형인자의 계산은 WMS v6.1을 사용하였다. 대상유역에 대하여 유출모의를 수행한 결과 정밀토양도의 분류방법에 따른 유출모의 결과의 차이는 유역에 따라서 달리 나타날 수 있으나, 정정화 등(1995)이 제시한 기준에 의해서 분류된 정밀토양도를 이용할 경우 대상유역으로 선정한 두 지역에서 모두 실측치에 좀더 근접한 결과를 도출할 수 있는 것으로 나타났다.

Keywords