Restorative Dentistry and Endodontics

  • 제32권5호
  • /
  • Pages.426-436
  • /
  • 2007
  • /
  • 2234-7658(pISSN)
  • /
  • 2234-7666(eISSN)
대한치과보존학회 (The Korean Academy of Conservative Dentistry)
권호 표지
DOI QR코드

DOI QR Code

접착레진의 부가도포가 레진 시멘트의 결합강도에 미치는 영향에 대한 연구

The Effect of Bonding Resin on Bond Strength of Dual-Cure Resin Cements

  • 김덕수 (경희대학교 대학원 치의학과 치과보존학교실) ;
  • 박상혁 (경희대학교 대학원 치의학과 치과보존학교실) ;
  • 최기운 (경희대학교 대학원 치의학과 치과보존학교실) ;
  • 최경규 (경희대학교 대학원 치의학과 치과보존학교실)
  • Kim, Duck-Su (Department of Conservative Dentistry, Division of Dentistry, Graduate of Kyung Hee University) ;
  • Park, Sang-Hyuk (Department of Conservative Dentistry, Division of Dentistry, Graduate of Kyung Hee University) ;
  • Choi, Gi-Woon (Department of Conservative Dentistry, Division of Dentistry, Graduate of Kyung Hee University) ;
  • Choi, Kyung-Kyu (Department of Conservative Dentistry, Division of Dentistry, Graduate of Kyung Hee University)
  • 발행 : 2007.09.29
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

본 연구에서는 접착레진의 부가적인 도포가 레진 시멘트의 결합강도에 미치는 영향을 연구하였다. One-Step Plus와 Choice, Single Bond와 Rely X ARC, One-Up Bond F와 Bistite II DC를 사용하였고 접착레진으로 D/E Bonding resin과 Pre-Bond Resin을 선택하였다. 적용 및 광중합 유무에 따라 12개의 군을 설정하였다. 제 3대구치의 건전한 상아질 면에 간접 복합레진 수복물을 제작하여 접착을 시행하고$1\;{\times}\;1\;mm^2$의 시편을 만들어 미세인장강도를 측정하였다. 또한 투과전자현미경으로 접착계면을 관찰하였다. 그리하여 다음과 같은 결론을 얻을 수 있었다. 1. Single Bond와 Rely X ARC, 그리고 One-Step Plus와 Choice를 조합하고 광중합을 시행한 군에서, 접착 레진을 부가적으로 도포할 경우 미세인장강도가 증가하였다. 2. One-Up Bond F와 Bistite II DC를 조합한 군에서 접착레진의 부가적인 도포에 의한 미세인장강도의 차이는 나타나지 않았다. 3. 광중합을 시행한 군들 중, One-Step Plus와 Choice를 조합한 군이 다른 군보다 높은 미세인장결합강도를 보였다. 4. 자가중합만을 시행한 군간에는 접착레진의 부가적인 도포에 의한 차이가 나타나지 않았다. 투과전자현미경 관찰을 시행하여 광중합을 시행하고 접착레진을 부가적으로 도포한 실험군에서 미세누출이 감소하고 접착층의 두께가 증가한 것을 확인할 수 있었다. 본 연구결과 완전산부식 상아질 접착제와 이중중합 레진 시멘트를 사용할 경우 부가적인 접착레진의 도포가 임상적으로 유용할 수 있다는 사실을 확인할 수 있었다.

The objective of this study is to evaluate the effect of an additional application of bonding resin on the bond strength of resin luting cements in both the light-cure (LC) and self-cure (SC) modes by means of the ${\mu}TBS$ tests. Three combinations of One-Step Plus with Choice, Single Bond with Rely X ARC, and One-Up Bond F with Bistite II were used. D/E resin and Pre-Bond resin were used for the additional application. Twelve experimental groups were made. Three mandibular $3^{rd}$ molars were used in each group. Indirect composite blocks were cemented on the tooth surface. $1\;{\times}\;1\;mm^2$ dentin-composite beam for ${\mu}TBS$ testing were made and tested. When total-etching dentin adhesives were used, an additional application of the bonding resin increased the bond strength (P < 0.05). However, this additional application didn't influence the bond strength of self-etching dentin adhesives (P > 0.05). In conclusion, the results suggest that an additional application of the bonding resin increases bond strength and enhances quality of bonding when using total-etching dentin adhesives.

키워드

참고문헌

  1. Lutz F, Setcos JC, Philips RW, Roulet JF. Dental restorative resins: Type and characteristics. Dent Clin North Am 27:697-712. 1983
  2. Peumans M, Van Meerbeck B, Lambrechts P, Vanherle G. Porcelain veneers: a review of literature. J Dent 28:163-177. 2000 https://doi.org/10.1016/S0300-5712(99)00066-4
  3. Michelle CA, Abbariki M, Orr JF. The influence of luting cement on the probabilities of survival and modes of failure of cast full-coverage crowns. Dent Mater 16:198-206, 2000 https://doi.org/10.1016/S0109-5641(00)00009-9
  4. Mannocci F, Innocenti M, Ferrari M, Watson TF. Confocal and scanning electron microscopic study of teeth restored with fiber posts. metal posts. and composite resins. J Endod 25:789-794, 1999 https://doi.org/10.1016/S0099-2399(99)80298-2
  5. Braga RR, Ferracane JL, Condon JR. Polymerization contraction stress in dual-cure cements and its effect on interfacial integrity of bonded inlays. J Dent 30:333-340, 2002 https://doi.org/10.1016/S0300-5712(02)00047-7
  6. Peutzfeldt A, Asmussen E. A comparison of accuracy in seating and gap formation for three inlay/onlay techniques. Oper Dent 15: 129-135, 1990
  7. Swift EJ Jr, Perdigao J, Combe EC, Simpson CH 3rd. Nunef MF. Effects of restorative and adhesive curing methods on dentin bond strengths. Am J Dent 14: 137-140, 2001
  8. Sanares AME, King NM, Itthagarun A, Tay FR, Pashley DH. Adverse surface interactions between onebottle light-cured adhesives and chemical-cured composites. Dent Materl 7 : 542-556, 2001
  9. Tay FR, Pashley DH, Yiu CKY, Sanares AME, Wei SW. Factors contributing to the incompatibility between simplified-step adhesives and self-cured or dual-cured composites. Part I. Single-step self-etch adhesive. J Adhes Dent 5:27-40, 2003
  10. Tay FR, Pashley DH. Have Dentin Adhesives Becom Too Hydrophilic? J Can Dent Assoc 69:726-731, 2003
  11. Tay FR, Pashley DH, Suh BI, Carvalho RM, Itthagarun A. Single-step adhesives are permeable membranes. J Dent 30: 371-382, 2002 https://doi.org/10.1016/S0300-5712(02)00064-7
  12. Pashley DH, Carvalho RM, Sano H, Nakajima M, Yoshiyama M, Shono Y, Fernandes CA, Tay FR. The Microtensile Bond Test: A Review. J Adhes Dent 1:299-309, 1999
  13. Carvalho RM, Pegoraro TA, Tay FR, Pegoraro LF, Silva NRFA, Pashley DH. Adhesive permeability affects coupling of resin cements that utilize self-etching primers to dentine. J Dent 32: 55-65, 2004 https://doi.org/10.1016/j.jdent.2003.08.003
  14. Pashley DH, Pashley EL, Carvalho RM, Tay FR. The effects of dentin permeability on restorative dentistry. Dent Olin North Am 46:211-245, 2002 https://doi.org/10.1016/S0011-8532(01)00009-X
  15. Tay FR, Pashley DH, Yiu C, Cheong C, Hashimoto M, Itou K, Yoshiyama M, King NM. Nanoleakage type and potential implications: evidence from unfilled and filled adhesives with the same resin composition. Am J Dent 17: 182-190, 2004
  16. Reis A, Loguercio AD, Carvalho RM, Grande RM. Durability of resin dentin interface: effects of surface moisture and adhesive solvent component. Dent Mater 20:669-676, 2004 https://doi.org/10.1016/j.dental.2003.11.006
  17. Tay FR, Pashley DH, Yoshiyama M. Two Modes of Nanoleakage Expression in Single-step Adhesives. J Dent Res 81 :472-476, 2002 https://doi.org/10.1177/154405910208100708
  18. Choi KK, Condon JR, Ferracane JL. The Effects of Adhesive Thickness on Polymerization Contraction Stress of Composite. J Dent Res 79:812-817, 2000 https://doi.org/10.1177/00220345000790030501
  19. Suh BI, Feng L, Pashley DB, Tay FR. Factors contributing to the incompatibility between simplified-step adhesives and chemically-cured or dual-cured composites. Part III. Effect of acidic resin monomers. J Adhes Dent 5:267-282. 2003
  20. Audenino G, Bresciano ME, Bassi F, Carossa S. In vitro evaluation of fit of adhesively luted ceramic inlays. Int J of Pros 12:342-347, 1999
  21. Molin MK, Karlsson SL, Kristiansen MS. Influence of film thickness on joint bend strength of a ceramic/resin composite joint. Dent Mater 12:245-249, 1996 https://doi.org/10.1016/S0109-5641(96)80030-3

피인용 문헌

  1. Effect of curing methods of resin cements on bond strength and adhesive interface of post vol.34, pp.2, 2009, https://doi.org/10.5395/JKACD.2009.34.2.103
  2. Effect of a desensitizer on dentinal bond strength in cementation of composite resin inlay vol.34, pp.3, 2009, https://doi.org/10.5395/JKACD.2009.34.3.223
  3. Microtensile bond strength of self-etching and self-adhesive resin cements to dentin and indirect composite resin vol.35, pp.2, 2010, https://doi.org/10.5395/JKACD.2010.35.2.106
  4. Effects of dentin moisture on the push-out bond strength of a fiber post luted with different self-adhesive resin cements vol.38, pp.4, 2013, https://doi.org/10.5395/rde.2013.38.4.234
  5. Pull-out bond strength of a self-adhesive resin cement to NaOCl-treated root dentin: effect of antioxidizing agents vol.39, pp.2, 2014, https://doi.org/10.5395/rde.2014.39.2.95