• 대한치과보철학회지
• /
• 제57권2호
• /
• pp.142-149
• /
• 2019

목적: 본 연구의 목적은 티타늄 디스크를 Modified simulated body fluid (mSBF)에 침전시켰을 때, 침전 시킨 기간에 따른 파골 세포 분화 억제 변화 양상을 알아보는 것이다. 재료 및 방법: Machined surface와 anodized surface를 가진 티타늄 합금(Ti grade III)디스크를 각각 증류수와 mSBF에 침전 시켰다. 침전 기간은 7일, 14일, 21일, 28일 진행하였으며, 각각의 기간 동안 대조군은 증류수에 침전하였다. 파골 세포로 분화 가능한 RAW 264.7 세포를 점주하여 침전 기간에 따른 부착된 세포 수 측정, TRAP 활성 측정, western blot을 통한 NFATc1의 발현양상을 측정하였다. 결과: Machined surface와 anodized surface 모두에서 mSBF에14일 이상 침전하였을 때, 파골 세포의 분화를 억제하는 능력이 통계적으로 유의하게 나타났다. 침전 기간과 세포의 부착은 상관관계가 없었다. 14일 이상 침전시켰을 때, TRAP 활성은 감소되었으며, NFATc1의 발현은 억제되었다. 14일 이상 침전 시켰을 때, TRAP활성 감소 및 NFATc1 발현 억제 양상은 변함이 없었다. 결론: 티타늄 합금 디스크를 14일 이상 mSBF에 침전시키면 RAW 264.7 세포가 파골 세포로 분화하는 것을 막을 수 있다. 침전기간이 증가해도 분화 억제 양상은 변화하지 않는다.

• 한국세라믹학회지
• /
• 제47권2호
• /
• pp.127-131
• /
• 2010

Biomimetic whisker-like apatite was formed on thermally and NaOH-treated titanium powder in a simulated body fluid (SBF). In the early process of the SBF immersion, the surface structure of the titanium powder was loosened, possibly due to the dissolution of $Na^+$ ions on the surface of the titanium powder into SBF. When immersed for 7 days in SBF, fine precipitates appeared on the titanium surfaces; the coating layer (<200 nm in thickness) consisted of nanostructured, amorphous whisker-like and particulate phase, observed by TEM. With the extension of the immersion time to 16 days, the chrysanthemum flower type morphology of carbonated hydroxyapatite with a nanocrystallinity was developed on the surface of the titanium powder.

• 대한금속재료학회지
• /
• 제46권2호
• /
• pp.105-110
• /
• 2008

Process of the hydroxyapatite (HA) formation on bioactive titanium metal prepared by NaOH treatment in a modified-simulated body fluid (mSBF) containing bovine serum albumin (BSA) was investigated by high resolution transmission electron microscope attached with energy dispersive X-ray spectrometer (EDX). The amorphous titanate, which was formed on titanium surface by NaOH treatment, combined with the calcium ions in the liquid to form an amorphous calcium titanite. With increasing of soaking time in the liquid, an amorphous calcium titanite combined with the phosphate ions to form an amorphous calcium phosphate with low Ca/P atomic ratio, and it grows as aggregates of plate (or needle)-like substance on titanium surface. The crystalline apatite layers, which are needle-shaped with the c axis parallel to the long axis, are formed in an amorphous calcium phosphate with further increase in soaking time. The formation of needle-shaped apatite layers can be explained by electrostatic effects and difference of concentration between calcium, phosphate, and albumin ions.

• 대한치과재료학회지
• /
• 제44권3호
• /
• pp.263-272
• /
• 2017

본 연구에서는 타이타늄 상에 항균제 클로르헥시딘(chlorhexidine; CHX)이 함유된 수산화인회석을 코팅하고 그 특성을 규명하였다. CHX를 혼합한 개조된 생체유사용액(modified simulated body fluid; mSBF)에 타이타늄 디스크를 침적하여 Ti-mSBF-CHX 시편군을 준비하였다. CHX를 함유하지 않은 mSBF에 침적하여 코팅한 Ti-mSBF 시편군을 다시 CHX 용액에 침적하여 Ti-mSBF-adCHX 시편군을 준비하였다. Ti-mSBF 시편 표면에 나노 형태의 결정들로 구성된 구형의 클러스터들이 균일하게 코팅되었다. Ti-mSBF-CHX 시편에서는 이러한 클러스터들과 함께 리본형상의 결정들이 관찰되었으며, 이 결정들에서 높은 CHX 조성이 측정되었다. 두 시편 모두 HAp 결정구조가 지배적이었으며, ${\beta}-TCP$ (tricalcium phosphate)와 OCP (octacalcium phosphate) 결정구조가 Ti-mSBF-CHX 시편에서 관찰되었다. FT-IR 스펙트럼은 Ti-mSBF-adCHX와 Ti-mSBF-CHX 시편군에서 CHX의 피크가 강하게 관찰되었다. 그러나 인산완충식염수(phosphate buffered saline;PBS)에 침적한 후, CHX가 Ti-mSBF-CHX 시편에서는 천천히 용출된 반면, Ti-mSBF-adCHX 시편에서는 빠르게 용출되었다. 따라서 Ti-mSBF-CHX 시편은 골과 유사한 HAp 구조를 가지며 함유된 CHX가 지속적으로 방출될수 있기 때문에 향후 임플란트 시술에서 염증을 방지할 수 있는 코팅법으로 기대된다.

• 한국재료학회지
• /
• 제17권8호
• /
• pp.408-413
• /
• 2007

Process of the hydroxyapapite(HA) precipitation on bioactive titanium metal prepared by NaOH in a modified-simulated body fluid(mSBF) was investigated by high resolution transmission electron microscope (HRTEM) attached with energy dispersive X-ray spectrometer(EDX). The amorphous titanate phase on titanium surface is form by NaOH treatment and an amorphous titanate incorporated calcium and phosphate ions in the liquid to form an amorphous calcium phosphate. With increasing of soaking time in the liquid, the HA particles are observed in amorphous calcium phosphate phase with a Ca/P atomic ratio of I.30. The octacalcium phosphate (OCP) structure is not detected in HRTEM image and electron diffraction pattern. After a long soaking time, the HA particles grow as needle-like shape on titanium surface and a large particle-like aggregates of needle-like substance were observed to form on titanium surface within needle-like shape. A long axis of needle parallels to c-direction of the hexagonal HA structure.

• 한국재료학회지
• /
• 제21권6호
• /
• pp.347-351
• /
• 2011

Hydroxyapatite (HAp) powders with different crystallinities were synthesized at various calcination temperatures through the co-precipitation of $Ca(OH)_2$ and $H_3PO_4$. The degradation behavior of these HAp powders with different crystallinities was assessed in a simulated body fluid solution (SBF) for 8 weeks. Below $800^{\circ}C$, the powders were nonstochiometric HAp, and the single HAp phase was successfully synthesized at $800^{\circ}C$. The degree of crystallinity of the HAp powders increased with an increasing calcination temperature and varied in a range from 39.6% to 92.5%. In the low crystallinity HAp powders, the Ca and P ion concentrations of the SBF solution increased with an increasing soaking time, which indicated that the low crystallinity HAp degraded in the SBF solution. The mass of the HAp powders linearly decreased with respect to the soaking time, and the mass loss was higher at lower crystallinities. The mass loss ranged from 0.8% to 13.2% after 8 weeks. The crystallinity of the HAp powders increased with an increasing soaking time up to 4 weeks and then decreased because of HAp degradation. The pH of the SBF solution did not change much throughout the course of these experiments. These results suggested that the crystallinity of HAp can be used to control the degradation.

• 한국재료학회지
• /
• 제15권10호
• /
• pp.671-677
• /
• 2005

Ti and Ti alloys are known to have excellent corrosion properties, which is an important aspect for biocompability of these implants in human body. In our study, four types of samples (Cp-Ti, Ti-6Al-4V, $0.5wt.\%$ Fe-Ti and ECAP Ti) were tested for their apatite forming ability and corrosion properties. The micropolished samples were treated with 5M NaOH solution at $60^{\circ}C$ for 24 hours. Each samples was gently washed with distilled water and heat-treated at 600"C for 1 hour. The heat-treated samples were soaked in Simulated Body Fluid (SBF) solution at $36.5^{\circ}C$ in an incubator for different period of time. The test revealed that $0.5 wt.\%$ Fe-Ti showing faster apatite growth on the surface (7th day) compared to other samples. Polarization curve test (PCT) was also carried out to determine the corrosion resistance of each samples in SBF solution. ECAP-Ti showed highest corrosion resistance compared to any other samples. $0.5wt.\%Fe-Ti$ showed higher corrosion potential and corrosion current compared to other samples.

• 한국결정성장학회지
• /
• 제19권1호
• /
• pp.19-24
• /
• 2009

생체모방법을 이용하여 표면 처리된 titanium plates 표면에 아파타이트 형성에 관하여 조사하였다. 표면 처리방법으로는 우선, titanium plate 표면에 titanium oxide층을 형성시키기 위하여 열처리온도를 $400^{\circ}C$, $600^{\circ}C$, 그리고 $800^{\circ}C$에서 전기로에서 5시간 유지하였으며, 열처리된 titanium plates 1 M를 수산화나트늄 용액에 침전시켜 표면을 화학적으로 처리하였다. 생체모방법으로 titanium plates 표면에 아파타이트를 형성시키기 위하여 표면처리된 titanium plates 를 Kokubo's recipe에 의하여 제조된 생체유사액(SBF)에 침적시켰다. SBF 용액에 1주와 3주기간 동안 침적시킨 후, 표면처리를 달리한 titanium plates 표면에 형성된 코팅층을 서로 비교 분석하였다.

• 한국재료학회지
• /
• 제15권11호
• /
• pp.690-696
• /
• 2005

The ultrastructure ore of a nanostructured apatite film nucleated from solution was studied to gain insights into that of bone minerals which is the most important constituent to sustain the strength of bones. Needle-shaped apatite crystal plates with a bimodal size distribution $(\~100\;to\;\~1000 nm)$ were randomly distributed and they were found to grow parallel to the c-axis ([002]), driven by the reduction of surface energy. Between these randomly distributed needle-shaped apatite crystals which are parallel to the film, apatite crystals (20-40nm) with the normal of the grains quasi-perpendicular to the c-axis were observed. These observations suggest that the apatite film is the interwoven structure of apatite crystals with the c-axis parallel and quasi-perpendicular to the fan. In some regions, amorphous calcium phosphate, which is a precursor of apatite, was also observed. In the amorphous phase, small crystalline particle with the size of 2-3 nm were observed. These particles were quite similar, in size and shape, to those observed in the femoral trabecular bone, suggesting the nucleation of apatites by a biomimetic process in vitro is similar to that in vivo.

• 한국표면공학회지
• /
• 제41권5호
• /
• pp.226-231
• /
• 2008

Titanium and its alloy have been widely used in dental implant and orthopedic prostheses. Electrochemical characteristics of dental implant in the various simulated body fluids have been researched by using electrochemical methods. Ti-6Al-4V alloy implant was used for corrosion test in 0.9% NaCl, artificial saliva and simulated body fluids. The surface morphology was observed using scanning electron microscopy (SEM) and energy dispersive x-ray spectroscopy (EDX). The electrochemical stability was investigated using potentiosat (EG&G Co, 263A). The corrosion surface was observed using scanning electron microscopy (SEM). From the results of potentiodynamic test in various solution, the current density of implant tested in SBF and AS solution was lower than that of implant tested in 0.9% NaCl solution. From the results of passive film stability test, the variation of current density at constant 250 mV showed the consistent with time in the case of implant tested in SBF and AS solution, whereas, the current density at constant 250mV in the case of implant tested in 0.9% NaCl solution showed higher compared to SBF and AS solution as time increased. From the results of cyclic potentiodynamic test, the pitting potential and |$E_{pit}\;-\;E_{corr}$| of implant tested in SBF and AS solution were higher than those of implant tested in 0.9% NaCl solution.