• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.2
• /
• pp.256-261
• /
• 2011

In this paper, a design and an implementation of an Analog to Digital (A/D) converter are introduced for the conversion of monitored battery cell voltage in the cell voltage monitoring(CVM) system in battery management system(BMS), which is one of the key devices of ECO hybrid cars. The A/D converter in CVM system required a middle conversion speed and a high resolution, therefore, a successive approximate register(SAR) typed A/D converter with 10 bits resolution has been designed and implemented using Magna 0.6um 40V process. The measurement result which kept ${\pm}1$ LSB accuracy in the full scale range(FSR) of 5V, showed the usefulness of the SAR typed A/D converter in realizing a CVM system.

• Journal of the Korean Geotechnical Society
• /
• v.40 no.2
• /
• pp.81-93
• /
• 2024

In Korea, numerous large-scale infrastructure construction projects and housing site developments are being undertaken. However, due to limited land availability, sourcing high-quality backfill materials that meet the standards for railroad and road embankment compaction and mechanically stabilized earth (MSE) retaining wall construction poses significant challenges. Concurrently, there has been an increase in structural failures of many MSE retaining walls, attributed primarily to reduced bearing capacity and impaired drainage performance, resulting from inadequate backfill compaction. This study aimed to analyze the structural performance and safety of an MSE retaining wall using recycled soil as backfill. We conducted small-scale model tests utilizing 3D printing technology combined with two-dimensional numerical analysis. The study quantitatively evaluated the MSE retaining wall's performance concerning the recycled soil mixing ratio and reinforcement installation methods. Furthermore, the utility of 3D printing was confirmed through the production of an experimental wall designed to facilitate easy reinforcement attachment, mirroring the conditions of actual MSE retaining wall construction.

• Sleep Medicine and Psychophysiology
• /
• v.16 no.2
• /
• pp.85-90
• /
• 2009

Introduction: There has been an increasing interest in the relationship between sleep and suicidality. In addition, suicidal patients habitually report their sleep problems. Although sleep-related complaints and electroencephalographic changes are generally encountered in psychiatric disorders, sleep complaints such as insomnia, hypersomnia and nightmares are more common in suicidal patients. In current study, we aimed at investigating the relationship between self-reported sleep duration and suicidality in general population. Methods: One thousand general population (male:female=500:500, mean age=$39.6{\pm}11.6$ years, ranged age=20-77 years) completed Center for Epidemiologic Study-Depression (CES-D), Beck Suicide Intent scale (BSI), Spielberger State-Trait Anger Expression Inventory (STAXI), Barratt Impulsiveness Scale (BIS), Morningness-Eveningness Scale (MES) and brief questionnaire of sleep habits. Results: After controlling for age and sex, score of BSI was correlated positively with the score of CES-D, STAXI and BIS on partial correlation analysis ($r_p$=0.251; p<0.001, $r_p$=0.352; p<0.001, and $r_p$=0.175; p<0.001, respectively). In addition, score of BSI was inversely correlated with the score of MES (rp=-0.066; p=0.037). However, score of BSI showed no significant correlation with sleep duration. However, regression analysis revealed that short (<6 hrs) or long (>10 hrs) sleep duration, the family history of psychiatric illness, the score of CES-D, and the score of STAXI predicted higher score of BSI significantly in total subjects (F=17.837, adjusted $R^2$=0.166; p=0.003, p=0.003, p<0.001, and p=0.003, respectively). This model was explained better in depressed subjects with 16 or higher score of CES-D (F=9.920, adjusted $R^2$=0.298). Conclusion: Current result suggested that not only short sleep duration (<6 hrs) but also long sleep duration (>10 hrs) might be related to suicidality.

• 한국연소학회:학술대회논문집
• /
• 1999.10a
• /
• pp.173-182
• /
• 1999

Internally Circulating Fluidized Bed Combustor(ICFBC) has been used for the incineration of waste sewage sludge. In this study hydrodynamic characteristics of two phase flow have been studied in a riser section of ICFBC. A lab-scale riser(l/5 scale of pilot plant) is designed and SiC (Geldart type B) is used for solid particles. Experiments are performed by controlling the fluidization parameters including superficial velocity, particle diameter and secondary air to primary air ratio for determination of solid holdup profiles in the riser. Our flow regime during experiments mainly belongs to the onset of turbulent regime(for d_{p}:300{\mu}m) and fast fluidization regime(for d_{p}:100{\mu}m). Superficial velocities of each regime are well agreed with results obtained by other researches. The results show that the axial solid holdup distributions calculated by measuring differential static pressures in the riser are found to show a basic profile described by a simple exponential function. As the particle size decreases, solid holdup along the riser is more uniformly distributed. To prove these experimental results, numerical calculations are being performed.

• Journal of the Korean Home Economics Association
• /
• v.43 no.7 s.209
• /
• pp.1-21
• /
• 2005

The purposes of this study were to investigate the actual condition and to deal with the psychological characteristics of computer addicted adolescent using the Minnesota Multiphasic Personality Inventory (MMPI). The subjects of this study were 407(male 185, female 222) 2nd grade students in senior high school in Daegu. All participant were evaluated on the basis of the Minnesota Multiphasic Personality Inventory (MMPI) and the upgraded Computer Addiction Inventory (CAI) scale which referred to the Young's Internet Addiction Self Diagnosis Scale and the Mind Test's Came Addiction. SPSS version 10.0 was used for data analysis. The scores of F, Hs, D, Pd, Pa, Pt, Sc of the MMPI scales showed that there were statistically significant differences between computer addicted adolescents and non-addicted adolescents. The rate of addicted adolescents was significantly higher than that of non-addicted adolescent in psychological problematic score ranges in the scales. The characteristics of the scores of computer addiction adolescents were similar to those of alcohol and drug addicts in the scales of D, Pd, and Pt. This survey revealed that the psychological disorders suffered by computer addiction adolescents may cause more serious social problems than alcohol and drug addicts.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.5
• /
• pp.846-858
• /
• 2008

This study was designed to propose a method to draft bodice block pattern from 3D body scan data. Subjects were ten elderly women in their 60's, who wear basic size(B: 94cm, W: 82cm) garment. Scanning was done using 3D whole body scanner(WB4, Cyberware). Measurements for 3D data and cross section were attained using Auto CAD, by which a upper bodice pattern for elderly women was drawn on the basis of short measured method. The results are as following: As for most items, no significant differences were shown between measurements from Martin's anthropometry and those from 3D scan data, suggesting measurement from 3D scan data could be used to draft a pattern. The drafting equations acquired were as follows; width of pattern=B/2+5.5, width of waist=W/2+3.5cm, dart amount=8cm. Dart distributions were 23%(B.P.) : 20%(front armpit) : 17%(side seam) : 18%(back armpit) : 15%(back protruded point) : 7% (center back line). Through wearing test using 5-point Likert scale, resultant pattern was evaluated as appropriate for elderly women's pattern to get over 4 point. As a result, it might be said that 3D scanning application is effective for elderly women in that it doesn't take time so much as Martin's anthropometry and that their body shape vary compared with those of young women.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.10a
• /
• pp.213-216
• /
• 2009

In this study, three cold-rolled TRIP steels containing different Al content (0.04wt%, 1.0 wt.% and 2.00wt%) were fabricated to understand the complex effects of Al in TRIP steel. The influences of Al on microstructural evolution of cold-rolled TRIP steels have been analyzed by using advanced analysis techniques, such as transmission electron microscope (TEM) and three dimensional atom probe tomography (3D-APT). TEM results revealed that second phases such as bainte and retained austenite decrease with increase of Al content. In addition, 3D-APT was used to characterize atomic-scale distribution of alloying elements at the constituent phases. Through these analysis techniques, the advanced characteristics of constituent microstructure in TRIP steels were identified depending on Al contents in TRIP steels.

• Journal of Korean Institute of Industrial Engineers
• /
• v.24 no.1
• /
• pp.115-126
• /
• 1998

A GDHS(Geothermal District Heating System) is a heating system supplying a group of districts with heat extracted from geothermal sources. Due to various advantages of GDHS including the saving of fuel consumption as well as the reduction of air pollution, a world-wide trend is to replace central/individual heating systems with GDH systems. The basic point of this paper is that a crash program mentality leads to inappropriate decisions about policy issues in large-scale research and development like the development of GDHS, R&D funding should be viewed as a sequential decision, not a once-and-for-all choice. Hence we develop on economic feasibility assessment model based on a continuous sequential decision process for the Chejoo Island GDHS Project by modifying Roberts's model.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 1997.05a
• /
• pp.79-82
• /
• 1997

토양내에서 오염유기물질이 불포화토양내에 유입될 때의 dispersion coefficient를 adsorption과 desorption과정에 대해 알아보았다. apparent dispersion coefficient를 측정하기 위해 일상적인 상대습도(46%)조건에서 parametric analysis를 행하였다. 실험에 사용된 토양은 fine sand와 silt-clay혼합시료였고, 흐름방향은 상향과 하향으로 하였다. 그리고, Freon gas를adsorbing solute로 사용하였다. 오염물질로는 DCM, TCE, DCB를 사용하였다. 분석을 위해서 linear와 probability scale의 breakthrough curve를 사용하였다. 공기에서의 diffusion coefficient의 예측을 위하여 Graham's law를 계산에 사용하였고, DCM diffusion coefficient는 0.098$\textrm{cm}^2$/s로 계산되었다. 연구결과, adsorption과 desorption의 속도는 차이가 있는 것으로 나타났으며, diffusion이 flow regime을 좌우하는 것으로 나타났다. 그리고, desorption에서의 D$^{a}$ D$^{o}$ 는 1보다 클수도 있다. 또한, dispersion은 silt-clay혼합시료에서의 속도와 함께 증가한다. dispersion은 Freon의 sorption방향에 크게 의존한다.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.9
• /
• pp.21-27
• /
• 1997

Square spiral inductors are designed with EM program in accordance with the inner diameter and the metal thickness which is 0.2.mu.m and 20.mu.m respectively. We propose a parameter extraction method based on the S-parameter. Lumped equivalent circuits of spiral inductors are analyed with reflection coefficient S$_{11}$, of witch freqency rnage is 1~10GHz. When metal thickness is 0.2.mu.m, S$_{11}$ with EM simulation is not the same as S$_{11}$ that of SPICE simulation. So we suggests a new lumped equivalent circuits which compensate circuits. Te new lumped equivalent circuits are adequate for other inductor with small scale at high frequencies.ncies.