• The Journal of Korean Institute of Information Technology
• /
• v.17 no.9
• /
• pp.91-97
• /
• 2019

When a radar tracks the warhead of a ballistic missile, decoys of a ballistic missile put a heavy burden on the radar resource management tracking the targets. To reduce this burden, it is necessary to be able to separate the signal of the warhead from the received dynamic radar cross section (RCS) signal on the radar. In this paper, we propose the method of separating the dynamic RCS of each target from the received signal by the Hough transform which extracts straight lines from the image. The micro motion of the targets was implemented using a 3D CAD model of the warhead and decoys. Then, we calculated the dynamic RCS from the 3D CAD model having micromotion and verified the performance by applying the proposed algorithm. Simulation results show that the proposed method can separate the signals of the warhead and decoys at the signal-to-noise ratio (SNR) of 10dB.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.3
• /
• pp.192-199
• /
• 2018

This paper proposes an improved discrete Fourier transform spread single sideband(DFT-s-SSB) orthogonal frequency division multiplexing(OFDM) system that solves the problems of conventional DFT-s-SSB OFDM systems. Conventional DFT-s-SSB systems use pulse amplitude modulation(PAM) for applying SSB modulation. The higher the modulation level, the worse is the BER performance. Further, transmission is possible only through the lower sideband(LSB) spectrum. When transmitting using the LSB and upper sideband(USB) spectra simultaneously, interference occurs and spectrum recovery is not performed correctly. To solve this problem, the proposed system applies the 2/3 convolution coding to improve the bit error rate(BER) performance, adjusts the DFT size, and selects the USB spectrum to utilize the remaining spectrum resources. In addition, when using this system in an environment that supports multiuser or limited bandwidth, it uses only half of the spectrum; therefore, it can utilize the remaining spectrum resources and improve the spectral efficiency.

• Transactions on Electrical and Electronic Materials
• /
• v.11 no.4
• /
• pp.170-173
• /
• 2010

Nanocrystalline cadmium sulfide (CdS) thin films were prepared using chemical bath deposition in a solution bath containing $CdSO_4$, $SC(NH_2)_2$, and $NH_4OH$. The CdS thin films were investigated using X-ray diffraction (XRD), photoluminescence (PL), and Fourier transform infrared spectroscopy (FTIR). The as-deposited CdS thin film prepared at $80^{\circ}C$ for 60 min had a cubic phase with homogeneous and small grains. In the PL spectrum of the 2,900 A-thick CdS thin film, the broad red band around 1.7 eV and the broad high-energy band around 2.7 eV are attributed to the S vacancy and the band-to-band transition, respectively. As the deposition time increases to over 90 min, the PL intensity from the band-to-band transition significantly increases. The temperature dependence of the PL intensity for the CdS thin films was studied from 16 to 300 K. The $E_A$ and $E_B$ activation energies are obtained by fitting the temperature dependence of the PL intensity. The $E_A$ and $E_B$ are caused by the deep trap and shallow surface traps, respectively. From the FTIR analysis of the CdS thin films, a broad absorption band of the OH stretching vibration in the range $3,000-3,600\;cm^{-1}$ and the peak of the CN stretching vibration at $2,000\;cm^{-1}$ were found.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.12
• /
• pp.1460-1466
• /
• 2010

In this paper, we analyzed the performance of radar target classification using the monostatic and bistatic radar cross section(RCS) for four different wire targets. Short time Fourier transform(STFT) and continuous wavelet transform (CWT) were used for feature extraction from the monostatic RCS and the bistatic RCS of each target, and a multi-layered perceptron(MLP) neural network was used as a classifier. Results show that CWT yields better performance than STFT for both the monostatic RCS and the bistatic RCS. And, when STFT was used, the performance of the bistatic RCS was slightly better than that of the monostatic RCS. However, when CWT was used, the performance of the monostatic RCS was slightly better than that of the bistatic RCS. Resultingly, it is proven that bistatic RCS is a good cadndidate for application to radar target classification in combination with a monostatic RCS.

• Bulletin of the Korean Mathematical Society
• /
• v.42 no.1
• /
• pp.75-85
• /
• 2005

In this paper, the visco-Da-Rios equation; (0.1) ($$\frac{{\partial}{\gamma}}{{\partial}t}=\frac{{\partial}{\gamma}}{{\partial}s}{\bigwedge}\frac{D}{ds}\frac{{\partial}{\gamma}}{{\partial}s}+{\nu}\frac{{\partial}{\gamma}}{{\partial}s}$$) is investigated on 3-dimensional complete orientable Riemannian manifolds. The global existence of solution is discussed by trans-forming (0.1) into a cubic nonlinear Schrodinger equation for complete orient able Riemannian 3-manifolds of constant curvature.

• Proceedings of the KIEE Conference
• /
• 1988.07a
• /
• pp.165-167
• /
• 1988

In this paper, the design of decoder for R-S code using discrete finite-field Fourier transform is presented. An important ingredient of this design is a modified Euclid algorithm for computing the error-locator polynomial. The computation of inverse elements is completely avoided in this modification of Euclid algorithm. This decoder is regular and simple, and naturally suitable for VLSI implementation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.9C
• /
• pp.868-875
• /
• 2003

In this paper, enhanced multiresolution motion estimation(MRME) using reduction of one-pixel shift in wavelet domain is proposed. Conventional multiresolution motion estimation using hierarchical relationship of wavelet coefficient has difficulty for accurate motion estimation due to shift-variant property by decimation process of the wavelet transform. Therefore, to overcome shift-variant property of wavelet coefficient, two level wavelet transform is performed. In order too reduce one-pixel shift on low band signal, S$_4$ band is interpolated by inserting average value. Secondly, one level wavelet transform is applied to the interpolated S$_4$ band. To estimate initial motion vector, block matching algorithm is applied to low band signal S$_{8}$. Multiresolution motion estimation is performed at the rest subbands in low level. According to the experimental results, proposed method showed 1-2dB improvement of PSNR performance at the same bit rate as well as subjective quality compared with the conventional multiresolution motion estimation(MRME) methods and full-search block matching in wavelet domain.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.10
• /
• pp.957-966
• /
• 2014

Video Stabilization For Vehicular Applications Is An Important Method Of Removing Unwanted Shaky Motions From Unstable Videos. In This Paper, An Improved Video Stabilization Method With Image Stitching Has Been Proposed. Scale Invariant Feature Transform (Sift) Matching Is Used To Calculate The New Position Of The Points In Next Frame. Image Stitching Is Done In Every Frame To Get Stabilized Frames To Provide Stable Video As Well As A Better Understanding Of The Previous Frame'S Position And Show The Surrounding Objects Together. The Computational Complexity Of Sift (Scale-Invariant Feature Transform) Is Reduced By Reducing The Sift Descriptors Size And Resticting The Number Of Keypints To Be Extracted. Also, A Modified Matching Procedure Is Proposed To Improve The Accuracy Of The Stabilization.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.10b
• /
• pp.255-256
• /
• 2002

In this paper, the frictional behavior according to the contact geometry was investigated using a micro-tribotester built inside a Scanning Electron Microscope (SEM) and an Atomic Force Microscope (AFM). FFT (Fast Fourier Transform) analysis for friction was conducted as a method to interpret the contact condition. From the experimental results, it could be concluded that the relative dimensions and distribution of contact asperities on the surface could be predicted by the power spectrum and main frequency in the FFT analysis of the friction signal.

• Steel and Composite Structures
• /
• v.18 no.4
• /
• pp.889-907
• /
• 2015

This paper aims to present an alternative analytical method for transient vibration analysis of doubly-curved laminated shells subjected to dynamic loads. In the method proposed, the governing differential equations of laminated shell are derived using the dynamic version of the principle of virtual displacements. The governing equations of first order shear deformation laminated shell are obtained by Navier solution procedure. Time-dependent equations are transformed to the Laplace domain and then Laplace parameter dependent equations are solved numerically. The results obtained in the Laplace domain are transformed to the time domain with the help of modified Durbin's numerical inverse Laplace transform method. Verification of the presented method is carried out by comparing the results with those obtained by Newmark method and ANSYS finite element software. Also effects of number of laminates, different material properties and shell geometries are discussed. The numerical results have proved that the presented procedure is a highly accurate and efficient solution method.