• 한국해양공학회지
• /
• 제23권2호
• /
• pp.74-80
• /
• 2009

Surface hardening treatments, such as using the high-frequency induction hardening method, are widely used to increase the fatigue life and prevent the failure of materials by locally increasing the surface hardness. This method, in particular, brings an improvement in static strength by compressive residual surface stress due to the hardening. In this study, the mechanical properties of high-frequency induction hardened SCM440 steel were investigated. These results were also compared with those for base metal and a Q/T (tempering after quenching) treatment specimen. The test results showed that partially high-frequency induction hardened SCM440 steel specimens were more improved in static strength, surface hardness, fatigue limit, and anti-wear than the base metal and Q/T treatment specimens. In particular, the fatigue limit of the high-frequency induction hardened SCM440 steel increased by more than about 52% compared to that of base metal and by about 25% compared to that of the Q/T specimen.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.220-225
• /
• 2004

The mesh-insensitive structural stress procedure by Dong is modified to apply to the welded joints with local thickness variation and inignorable shear/normal stresses along local discontinuity surface. In order to make use of the structural stress based K solution for fatigue correlation of welded joints, a proper crack growth model needs to be developed. There exist some significant discrepancies in inferring the slope or crack growth exponent in the conventional Paris law regime. Two-stage crack growth model was not considered since its applications are focused upon the fatigue behavior in welded joints in which the load ratio effects are considered negligible. In this paper, a two-stage crack growth law considering high mean loading is proposed and proven to be effective in unifying the so-called anomalous short crack growth data.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2001년도 The IMAPS-Korea Workshop 2001 Emerging Technology on packaging
• /
• pp.127-133
• /
• 2001

솔더볼의 피로강도에 대한 솔더 조성의 영향을 조사하기 위하여 패키지 신뢰성 시험을 실시하였다. 공정조성 솔더, S $n_{62}$P $b_{36}$A $g_2$, S $n_{63}$P $b_{34.5}$A $g_2$S $b_{0.5}$ 솔더를 사용해 제조된 시편을 MRT Lv 2a 조건에서 전처리 후 TC 시험을 수행하였다. 제조 직후, 전처리 후, TC 후 각각에 대하여 전단강도를 측정하였으며, 미세 조직 사진을 얻었다. 또한, SEM과 EDX를 이용하여 파괴 기구에 대한 분석을 실시하였으며, 신뢰성 시험 후 전단강도의 저하에 대하여 논의하였다.다.

• 한국산업안전학회:학술대회논문집
• /
• 한국안전학회 1999년도 춘계 학술논문발표회 논문집
• /
• pp.7-12
• /
• 1999

This study deals with effects of heat-treatment on the bending fatigue of spur gears. The test gears are heat-treated by two different treatments. After carburization, one group of the test gears is quenched directly, while another group is furnace cooled, reheated then quenched. The fatigue test at a constant stress amplitude is performed by using an electrohydraulic serve-controlled pulsating tester. The S-N curves are obtained and illustrated.

• 한국생산제조학회지
• /
• 제24권6호
• /
• pp.589-593
• /
• 2015

The demand of high cycle fatigue behavior on plate material is increasing because of its various applications. However, the high-cycle fatigue life data of the plate material is very rare compared to the rod material. Thus, in this study, a plate specimen is designed for the ultrasonic fatigue test because it is time efficient as compared to the conventional fatigue test. To apply the ultrasonic fatigue test, the specimen design is required to resonate at 20 kHz. Therefore, the dynamic elastic modulus was determined by measuring the resonance frequency with a piezoelectric element and laser doppler vibrometer (LDV). As a result, the plate specimen is designed and demonstrated using the ultrasonic fatigue testing machine. The ultrasonic fatigue test results were compared with the hydraulic fatigue test results.

• 콘크리트학회논문집
• /
• 제23권2호
• /
• pp.135-144
• /
• 2011

최근 PS 강연선의 대체재로서 높은 인장강도와 훌륭한 내부식을 가진 FRP(fiber rienforced polymer)를 이용한 조사가 활발히 진행되어지고 있다. 따라서, 이 연구는 FRP 긴장재를 이용한 프리스트레스트 콘크리트 보를 제작하여 반복 하중에 따른 피로거동의 특성을 분석함으로써 프리스트레스트 콘크리트 보의 안전성을 평가하고자 하였다. 또한 기존 PS 강연선을 이용한 프리스트레스트 콘크리트 보를 제작하여 피로 성능을 비교하였다. 반복 하중은 정적 실험을 통해서 얻은 극한 하중의 40%를 최소 하중으로 일정하게 고정하고 최대 하중은 극한 하중의 60%, 70%, 80%로 결정하였다. 반복 하중은 4점 재하방식으로 sine파를 이용한 1~3 Hz의 속도 재하하였다. 피로한계는 100만회로 하였다. 40~60% 범위의 시험체는 100만회까지 피로 파괴가 나타나지 않았지만, 반복 횟수가 증가함에 따라 콘크리트와 긴장재 사이의 부착력이 저하되었고, 수평방향의 균열이 나타났다. FRP 긴장재를 이용한 프리스트레스트 콘크리트 보의 피로 실험 결과 사용 하중 상태에서의 반복 하중에 대해서 안전한 것으로 나타났다. 피로한계 100만회에 대한 피로 강도는 FRP 긴장재를 이용한 프리스트레스트 콘크리트 보의 경우 69.2%, PS 강연선을 이용한 프리스트레스트 콘크리트 보는 59.8%에 해당함을 알 수 있었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 춘계학술대회 논문집
• /
• pp.401-402
• /
• 2008

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1994년도 가을 학술발표회 논문집
• /
• pp.103-112
• /
• 1994

Various kinds of fatigue failures of ocean structures were reported and the importance of fatigue life estimation at the design state is significantly recognized and various kinds of analysis approaches have been discussed. In this paper characteristics of the simplified method proposed here and the spectral method are studied and the elements of the approach are discussed. The merits and demerits of the forementioned analysis schemes are studied and the relating parameters such as SCF and S-N curves are also investigated. The simplified fatigue analysis approach and tile spectral fatigue analysis technique is applied for the analysis of bracing members of typical semi-submersible drilling rig structure for the verification of the usage of two methods and the sensitivity study has been performed using the simplified method. The result from the spectral analysis give a more realistic picture of the fatigue life of the offshore structure considered here.

• 항공우주시스템공학회지
• /
• 제4권2호
• /
• pp.21-25
• /
• 2010

Fatigue properties of composite materials are extremely important to design durable and reliable helicopter rotor blades. However, it is very difficult to apply conventional fatigue test loads in short period. Therefore, accelerating test speed and facilitating spectrum load realization are required. In this study, we have developed a fatigue testing method that uses a resonance of simply supported beam type blade specimen. This test consists in exciting the blade specimen with a frequency that corresponds to its natural frequency. In that case, the test specimen similar to a beam fixed between two pivot points starts vibrating and is significantly deformed. Resonant fatigue tests were performed by changing exciting vertical amplitude and frequency, and S-N curves of each composite materials were successfully obtained.

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권2호
• /
• pp.357-364
• /
• 2001

This study deals with the effect on non-martensitic layer on the fatigue strength in carburized gear. The test gears are carburized, then treated by the combination of chemical polishing and electro-polishing. Carburization treatment is used widely on parts of power transmission system like surface hardened layer to improve fatigue strength. Carburized gears are observed using a scanning electron microscope(SEM) to determine the characteristics of crack initiation mechanism in the surface layer. The constant street amplitude fatigue test is performed by using and electro-hydraulic servo-controlled pulsating tester. The S-N curves are obtained and illustrated. The effect of non-martensitic layer on the fatigue strength is clarified.