• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.4B
• /
• pp.257-269
• /
• 2003

S(Synchrous)-DMT(Discrete Multi Tone) is an emerging cable modem technology applicable to the upstream channel for high speed multimedia communication. In this paper we analyze the transmitting and receiving process of S-DMT scheme and derive bit error probability of S-DMT scheme in the $\varepsilon$-mixture impulse noise model which appropriately reflects impulse noise model which approproately reflects impulse noise characteristics of upstream channel. The analysis results show a good match with the simulation results. We also compare Eb/No gain performance of S-DMT with TDMA in 16-, 32-, 64-QAM.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.2A
• /
• pp.1-11
• /
• 2005

S-CDMA is the advanced physical layer modulation techniques of DOCSIS 2.0 specification. S-DMT is another challenging modulation technique for cable modem upstream channel due to the intrinsic robustness for fading and impulse noise. The BER performance of S-DMT and S-CDMA over the mixed channel model of AWGN and impulse noise were evaluated in comparison with TDMA. The mathematical BER derivation and the comparison of those three types of technique were performed based on the ${\varepsilon}-mixture$ non-Gaussian impulse noise model. The results of simulation show good compliance with those of analytic BER derivation. By the results of comparisons, it was verified that the performance of S-CDMA and S-DMT is almost the same, but the performance of S-DMT is far superior to that of TDMA at typical BER range of the practical data communications.

• Journal of Digital Contents Society
• /
• v.8 no.3
• /
• pp.385-391
• /
• 2007

In this paper, we propose a frequency synchronization algorithm for S-DMT cable modem, which is practicable to the next-generation high capacity upstream physical layer in HFC networks. Analyzing several viable frequency synchronization algorithms of multicarrier systems, we proposed an algorithm using predetermined training sequence of repeated pattern in preamble field and residual frequency offset compensation with pilot signals. We verified that the simulation results of the proposed algorithm in AWGN showed good performance and suitability to the S-DMT upstream cable modem for fast frequency synchronization.

• Environmental Analysis Health and Toxicology
• /
• v.19 no.4
• /
• pp.359-366
• /
• 2004

Iron (Fe) is an essential metal in biological processes, which maintains a homeostasis in the human body. Divalent metal transporter 1 (DMT1) has been known as an iron transporting membrane protein, which is involved in the uptake Fe at the apical portion of intestinal epithelium, and may transport Fe across the membrane of acidified endosome in peripheral tissues. In this study, we studied the tissue distribution of DMT1 in the Fe supplemented (FeS) diet fed rats, and the regulation of DMT1 expression by depleting body Fe. Sprague-Dawley rats were divided into two groups, and fed FeS (120 mg Fe/kg) diet or Fe deficient (FeD, 2∼6 mg Fe/kg) diet for 4 weeks. The evaluation of body Fe status was monitored by measuring sFe, UIBC and tissue Fe concentration. Additionally, DMT1 mRNA levels were analyzed in the peripheral tissues by using the quantitative real time RT-PCR method. In the FeS diet fed rats, the tissue Fe was maintained at a relatively high level, and DMT1 was eventually expressed in all tissues studied. DMT1 was highly expressed in the testis, kidney and spleen, while a moderate levels of DMT1 expression was detected in the brain, liver and heart. In the digestive system, the highest level of DMT1 was found in the duodenum. Feeding the FeD diet caused a reduced body weight gain and depletion of body Fe with finding of decreased sFe, increased UIBC and decreased tissue Fe concentration. The depletion of body Fe upregulated DMT1 expression in the peripheral tissue. The expression of DMT1 was very sensitive to the body Fe depletion in the small intestine, especially in the duodenum, showing dramatically higher levels in the FeD rats than those of the FeS group. In the FeD diet fed animals, the expression of DMT1 was low significantly in other tissues compared with the duodenum. The expression of DMT1, however, was 60∼120% higher in the testis, kidney and spleen, and 30∼50% higher in the lung, liver and heart, compared to the FeS diet fed rats. In summary, DMT1 expression was ubiquitous in mammalian tissue, and the level of expression was the organ-dependent. The expression of DMT1 in peripheral tissues was upregulated by depletion of body Fe. Duodenum was the most sensitive tissue among organs studied during Fe depletion, and expressed the greatest level of DMT1, while other tissues were less higher than in duodenum. This study supports that DMT1 plays a role in maintaining the body Fe level through intestinal uptake as well as homeostasis of Fe in the peripheral tissue.

• Journal of Digital Contents Society
• /
• v.7 no.2
• /
• pp.109-115
• /
• 2006

In this paper, we design and performance evaluate the equalizer for S-DMT table modem, which supports more channels and better quality symmetric mutimedia services over HFC network. We verified that both of the designed equalizers show good convergence characteristics and that the performance of the time domain equalizer is 1 dB better than that of the frequency domain equalizer overall range of Eb/No.

• Journal of the Korean Geotechnical Society
• /
• v.16 no.6
• /
• pp.23-33
• /
• 2000

인천국제 공항에 분포하는 해성세립토 지반에서 일련의 CPTU와 DMT를 실시하고 그결과로부터 구한 비배수전단강도($s_{u}$ ), 과입밀도(OCR), 압밀계수($c_{h}$) 등과 같은 지반 정수와 기존의 시험자료 등을 분석하여 두 시험 결과를 비교하였다. 이 분석에의하면, CPTU와 DMT 두시험은 모두 피에조콘 정수, $B_{q}$ )로 분류하여 점성토인 지반에서 보다 신뢰성이 높은결과를 주었으며, 또한 해석방법에 따라 지반정수 산정결과에 큰 편차를 보여, 적절한 해석방법의 선택이 신뢰성있는 지반정수의 산정을 위한 주요한 인자임을 알았다. 그리고, 소성적 성질이 낮은 세립토 지반에서의 CPTU와 DMT를 이용한 비배수전단 강도 또한 과압밀비의 산정은 상당한 오차를 유발할 수 있다고 판단되었다.

• Journal of Power System Engineering
• /
• v.12 no.6
• /
• pp.56-63
• /
• 2008

Many advanced nations have been developing the next generation logistic systems to effectively deal with gradually increased logistic flows over the world. Particularly, dual mode trailer(DMT) systems are significantly focused as a new alternative transportation which basically provides integrating of the land and railroad services. This paper presents new driving mechanism for DMT systems using the hydraulic pressure cylinder systems. Such is mechanically composed of supporting and rotating parts independently, which are mostly important for whole system performance. We analyze feasible operational problem occurred in driving mechanism from the conventional DMT systems and compare our proposed deign specification with the Modalohr DMT system to demonstrate its reliability and practicability.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.5
• /
• pp.17-25
• /
• 2004

The flat dilatometer test (DMT) is a geotechnical tool to estimate in-situ properties of various types of ground materials. The undrained shear strength is known to be the most reliable and useful parameter obtained by DMT. However, the existing relationships which were established for other local deposits depend on the regional geotechnical characteristics. In addition, the flat dilatometer test results have been interpreted using three intermediate indices - material index $(I_D)$, horizontal stress index $(K_D)$, and dilatometer modulus (E$_{D}$) and the undrained shear strength has been estimated merely using the horizontal stress index $(K_D)$. In this paper, the applicability of the flat dilatometer to Korean soft clay deposit has been investigated. Then an artificial neural network was developed to evaluate the undrained shear strength by DMT and the ANN, based on the $p_0, p_1, p_2, {\sigma '}_v$ and porewater pressure. The ANN which adopts the back-propagation algorithm was trained based on the DMT data obtained from Korean soft clay. To investigate the feasibility of ANN model, the prediction results obtained from data which were not used to train the ANN and those obtained from existing relationships were compared.

• Journal of the Korean Geotechnical Society
• /
• v.17 no.2
• /
• pp.41-49
• /
• 2001

본 연구에서는 2단계 확정예정부지의 일부 원지반에서 수행된 CPTu(piezocone penetration test)와 DMT(dilatometer) 및 실내시험 결과를 바탕으로 흙의 분류, 비배수전단강도 그리고 압밀계수 등의 공학적 특성을 살펴보았다. CPTu와 DMT를 이용한 흙의 분류 결과, 점토층 사이에 얇게 산재한 샌드심(sand seam)층을 보다 정확하게 판정할 수 있었다. 삼축압축시험의 비배수 강도($S_{u}$ )를 기준으로 산정한 콘계수는 CPTu의 경우 $N_{k}$ =18.2를, DMT의 경우 Roque(1988)의 제안식을 이용한 $N_{c}$=6.35로 추정한 비배수전단강도가 비교적 일치하는 것으로 나타났다. 또한 CPTu와 DMT를 이용한 수평압밀계수는 비교적 근사한 것을 알 수 있었다. 그러나, 해성점토사이에 실트, 샌드심이 존재하는 실트질 지반에서의 수평압밀계수가 연직압밀계수보다 상당히 크며, 압밀계수비($C_{h(Oedo, CPTu, DMT)}$ /$C_{v Oedo}$ )는 4.3~10.2로 큰 차이를 보이고 있다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.10a
• /
• pp.17-18
• /
• 2006