• Korean Journal of Applied Biomechanics
• /
• v.16 no.1
• /
• pp.55-63
• /
• 2006

The purpose of this study is to prove the kinematical characteristics of Deff motion, the high bar performance, in terms of flying phases so that we can provide basic sources for improving gymnastic performance. To do this, we selected and analyzed the performance of two athletes who did Deff motion in the high bar competition of male artistic gymnastic in the 22nd Universiade 2003 Daegu. We drew the conclusions from the kinematical factors that were came out through analyzing three-dimensional cinematography of the athletes' movements, by using a high speed video camera. To make a successful performance, a performer releases the bar at a height of a high bar vertically and at a height of 82cm horizontally, and the flying performance should be made without moving forward, as maintaining the proper balance, in order to rise over 118cm high during the flying phase. When the performer is releasing the bar, an increase of the vertical speed in the center of the body and extension of a knee joint and a hip joint contribute to increasing a flying height. And when the moving body is twisted, leaning to left side is caused by the winding movement of a knee joint, which causes an unstable bar grasp. To grasp the bar stably, just before releasing the performer should gain propulsive force from twisting rotation through increasing the speed of shoulder rotation. And before the peak point, the performer should make sure of a body rotation distance over $164^{\circ}$ so that he or she can do an aerial rotary performance smoothly. When grasping the high bar, the center of the body should be above the bar and the angle of shoulder rotation should be maintained close to $540^{\circ}$ simultaneously. he high point performance(S1) has more speed on an ascending phase and less speed on a descending phase than the low point performance (S2). At the peak point, both the rotation angle of the body and that of the shoulder in high point performance are big as well. In conclusion, it is shown that a performer can make a jump toward the high bar easily with the body straight because the performer can hold the upper part of the body erect early in a descending phase.

• The Journal of the Korea Contents Association
• /
• v.19 no.8
• /
• pp.359-369
• /
• 2019

This research suggests video solutions and efficient implementations for low-budget performances. This study adopts Millumin as a mapping server, which reflects the character of small theatres with a lower budget that doesn't use more than four projectors in a show. By comparing pros and cons of media servers, the study discovers how to employ an appropriate server as well as to participate in a pre-video production stage, which increases the artistry of directing and reduces unnecessary graphics. Meanwhile, with the participation of an interpretive programmer, this study suggests a way to manage the rehearsal time and to increase the artistry of directing. In addition, this study analyses the relationship between the video's visual motive source in the story's development, crisis, climax, twist and the provided narrative based on "Trace U the musical (2018)", by this analyzation, the relationship between storytelling and the video is fully shown. A visual motive is related to the action of actors, the movement of dancers, the music, the lyrics and the lines. Furthermore, the provided narrative confirms that the existence of an actual relationship with the turning point of the plots, characters' emotion, suggestions of sub-plot and the twists of own story. In conclusion, it implies a video of small theatres can not be separated from the probability of the narrative.sh an efficient ad execution strategy that reflected the characteristics of mobile devices.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.6
• /
• pp.1044-1053
• /
• 2022

Time domain reflectometry (TDR) is a diagnostic technique to evaluate the physical integrity of cable and finds application in leak detection and localization of piping system. In this study, a cable-shaped leak detection sensor was proposed using the TDR technique for monitoring leakage detection of ship's engine room seawater piping system. The cable sensor was developed using a twisted pair arrangement and wound by an absorbent material. The availability and performance of the sensor for leak detection and localization were evaluated on a lab-scale pipeline set up. The developed sensor was installed onto the pipes and flanges of the lab-scale set up and various TDR waveforms were acquired and analyzed according to the dif erent variables including the number of twists and sheath thickness. The result indicated that the twisted cable sensor was able to produce clear and smooth signal as compared to the TDR sensor with a parallel arrangement. The optimal number of twist was determined to be above 10 per the unit length. The optimal diameter of sheath thickness that results in the desired sensitivity was determined to be ranging from 80% up to 120% of the diameter of the conductor. The linear regression analysis for estimation of leak localization was carried out to estimate the location of the leakage, and the result was a determination coefficient of 0.9998, indicating a positive relationship with the actual leakage point. The proposed TDR based leak detection method appears to be an effective method for monitoring leakage of ship's seawater piping system.

• Journal of Biomedical Engineering Research
• /
• v.38 no.4
• /
• pp.143-152
• /
• 2017

The main purpose of this research was to examine the EMG characteristics of driver's upper limb and driving performance for operating accelerator and brake pedal by using four types of left hand control devices(Push/Pull, Push/Right angle, Push/Rock, Push/Twist) during simulated driving. The persons with disabilities in the lower extremity have problems in operation of the vehicle because of functional impairments for controlling accelerator and brake pedal. Therefore, if hand control device is used for adaptive driving controls in persons with lower extremity loss, the disabled people could improve their quality of mobility life by driving a car. Twenty subjects were involved in this research to assess driving performance and EMG activities for operating accelerator and brake pedal by using four types of left hand controls in driving simulator. We measured EMG responses of six muscles(posterior deltoid, middle deltoid, biceps, triceps, extensor carpi radialis, and flexor carpi radialis) during pulling and pushing movement with four types of left hand controls for acceleration and braking. STISim Drive 3 program was used for evaluation test of four types of left hand control devices in straight lane course for time to reach target speed and brake reaction time. While operating the four types of left hand controls for acceleration, EMG activities of posterior deltoid in normal subjects were significantly increased(p < 0.05) compared to the disabled subjects. It was also found that EMG responses of triceps and posterior deltoid were significantly increased(p < 0.05) when using the Push/Right angle type than Push/Pull type. While operating the four types of left hand controls for braking, EMG activities of flexor carpi radialis and triceps in subjects with disability were significantly increased(p < 0.05) compared to the normal subjects. It was shown that muscle responses of posterior deltoid, middle deltoid and triceps were significantly increased when using the Push/Right angle type than Push/Rock type. Time to reach target speed and brake reaction time in subjects with disability was increased by 2.5% and 4.6% on average compared to normal subjects. The person with disabilities showed a tendency to relatively slow performance in acceleration at the straight lane course.

• Journal of the Microelectronics and Packaging Society
• /
• v.22 no.1
• /
• pp.55-61
• /
• 2015

Stretchable electrode materials are focused to apply to flexible device such as e-skin and wearable computer. Used as a flexible electrode, increase in electrical resistance should be minimalized under physical strain as bend, stretch and twist. Carbon black is one of candidates, for it has many advantages of low cost, simple processing, and especially reduction in resistivity with stretching. However electrical conductivity of carbon black is relatively low to be used for electrodes. Instead graphene is one of the promising electronic materials which have great electrical conductivity and flexibility. So it is expected that graphene added carbon black may be proper to be used for stretchable electrode. In this study, under stretching electrical property of graphene added carbon black composite electrode was investigated. Mechanical stretching induced cracks in electrode which means breakage of conductive path. However stretching induced aligned graphene enhanced connectivity of carbon fillers and maintained conductive network. Above all, electronic structure of carbon electrode was changed to conduct electrons effectively under stretching by adding graphene. In conclusion, an addition of graphene gives potential of carbon black composite as a stretchable electrode.

• Journal of the Korean Society of Costume
• /
• v.62 no.3
• /
• pp.137-151
• /
• 2012

In 1966, $Seokgatap$ pagoda in $Bulguksa$ temple was damaged by the tomb robbers and was dismantled to fix the damage. In the process, many offerings to Buddha and containers for Sarira(the cremated remains) were found in $Sarigong$(specially designated space for the Sarira casket) inside the second floor of the pagoda. Many fabrics like $Geum$, $Neung$(twill), $Rha$(complex gauze), silk tabby and linen were also excavated. In this study, $Geum$ fabric from the $Seokgatap$ was closely examined. $Geum$ of $seokgatap$ is weft-faced compound weave according to the analysis of its weaving pattern which was wrongly presumed as warp-faced compound weave for some time. Technical analysis of $Geum$: Main: silk, Binding: silk, Proportion: 1 main warp to 1 binding warp, Count: 15 main warps and 15 binding warps per centimeter, Weft: polychrome silk without apparent twist, Colors: yellow, mustard yellow, deep blue, green and purple, Weave: weft-faced compound twill, 1/2 S. $Geum$ of $Seokgatap$ was made in the $8^{th}$ century, since it was weaved in weft-faced compound weave twill which was popular in the $8-9^{th}$ century. And also, the arrangement of the colors was done in the same way of gradation $Geum$ silk which was popular in the $7-8^{th}$ C in China and Japan. Third, we restored the pattern of $Geum$ of the Unified Shilla Dynasty for the first time. It was very difficult to figure out the shape and the size of pattern since the fabric was partially lost and ruined. We tried to draw the diagram of structure with the cross point of the warp and the weft to restore the pattern. By doing so, we could identify two kinds of small flower pattern, palmette and the pattern of repeating vines. Fourth, we could infer that the $Geum$ of $Seokgatap$ was used for $geumdae$(a pouch made of $geum$) by analyzing all the documents and the characteristics of the fabric.

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.3
• /
• pp.185-190
• /
• 2010

This study was focused to make a wooden plate that is engraved with writings or pictures on the medium density fiberboard (MDF), and then to produce a calligraphy-carving artwork by carbonization of the carved MDF. The external appearances and anatomical changes were investigated on the carbonized MDF and aesthetic characteristics was also discussed. No split and no twist were found after the carbonization (at $850^{\circ}C$) of the calligraphy-encarved MDF, shrinkages of the MDF were observed with portions of 21.8% in length, 18.8% in width and 43.5% in thickness, and 69.2% of weight loss with density decrease of 14.8% were observed as well. From the observation of the carbonized board by a scanning electron microscope, specific phenomena were found: the adhesives, surrounding the fiber's surface and pits, were carbonized, the woody fibers were changed smoothly, the pits were opened, the fiber' size was uniformized, and the organization was compacted. By the combination of handmade calligraphy-woodcarving and crack-free carbonizing methods, it was able to find a new method for manufacture carbonized calligraphy-woodcarving artwork. It is concluded that the calligraphy-woodcarving artwork using carbonized board can be a new access for the eco-friendly art that has the advantage of the functionality of charcoal and the aesthetic of calligraphy-woodcarving simultaneously.

• Journal of the Korean Society of Costume
• /
• v.62 no.4
• /
• pp.107-122
• /
• 2012

The purpose of this study is to investigate the changes and developments that occurred as a result of the exchanges of gyeong-geum(經錦), a warp-faced compound weave of East Asia, and wie-geum(緯錦), a weft-faced compound weave of West Asia. In order to maximize the efficiency of this research, topics were narrowed down to the weaving skills and patterns, and the period was limited to the Tang dynasty. The systematic characteristics and differences of gyeong-geum and wie-geum were compared and contrasted through different works of literature. Then the excavated remains of geum-textiles were analyzed and the characteristics of the geum-textiles were defined in chronological order. The origin of wie-geum is traced back to the time when West Asia started to imitate the weaving style of the East Asian gyeong-geum. When combined with the weaving skills of the West Asian, gyeong-geum, which broke through the West and developed into the weft-faced compound twill silk, or samite. The exchange of geum-textiles took place as the techniques of gastric filament woven geum-textiles returned to the East. Along with the pearl roundel motifs of Sassanian Persia, mythical animals and western motifs of hunter patterns were used for the patterns of wie-geumin during the early Tang dynasty. This tendency is related to pa-sa-geum(波斯錦), ho-geum(胡錦), beon-geum(番錦) according to the recorded literature. The 8th and 9th century are periods when the West Asian Persian style was abandoned and the East Asian style, samite, was established. Not only did S twist silk threads replace Z twists, but also the repetition of patterns unfolded along with the weft and the warp. As this tendency was strengthened after the 9th century, the expression of patterns became more vividly colorful and showed both elements of naturalism and realism. The characteristics of the Bosangwha(寶相花) pattern in the Tang period were established with the rampantly repeated rosettes with birds often holding auspicious branches, that fly amid floral compositions.

• The Journal of Korean Academy of Prosthodontics
• /
• v.37 no.4
• /
• pp.433-453
• /
• 1999

There are a lot of elements affecting the success of implant prosthesis. The quality of surgical procedure is considered as one of the key factors. To avoid the excess heat generation is an important element of successful osseointegration and it can be achieved by using a gentle surgical technique with a sharp instrument in bone drilling. This study was performed to measure and analyze comparatively the heat transmitted to sur-rounding bone at a distance of 0.5mm from the periphery of the drill hole in each drilling stage. The results were as follows. In standard system, the temperature of surrounding bone tissue ranged from $29.2^{\circ}C\;to\;48.3^{\circ}C$ with irrigation and from $34.6^{\circ}C\;to\;84.3^{\circ}C$ without irrigation. And in wide system, the temperature of surrounding bone tissue ranged from $29.5^{\circ}C\;to\;52.5^{\circ}C$ with irrigation and from $34.8^{\circ}C\;to\;87.8^{\circ}C$ without irrigation. And the temperature ranges exceeded the threshold without irrigation, while showing less than the threshold by the cooling effect of irrigation. In comparing standard system with wide system, although there was no significant difference, ${\phi}4.3mm$ pilot and ${\phi}4.3mm$ twist drill of wide system showed high value and wide system showed slightly high elevation of temperature in all depth in fixture installation. In the finite element analysis, the calculated value by the Fourier's cooling law were applied to the bone drilling surface. And through analysis using different irrigation temperatures at $28^{\circ}C,\;15^{\circ}C\;and\;5^{\circ}C$, and according to the time. The result was that the cooling water at least below $15^{\circ}C$ was required to maintain the temperature of surrounding bone less than threshold in bone drilling, the cooling water below $5^{\circ}C$ was required to gain more sufficient cooling effect, and cooling over 5 seconds was needed after bone drilling for sufficient effect.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.3
• /
• pp.191-197
• /
• 2019

As the shipbuilding and offshore plant industries grow larger and more complex, their maintenance and inspection systems become more important. Recently, maintenance and inspection systems based on augmented reality have been attracting much attention for improving worker's understanding of work and efficiency, but it is often difficult to work with because accurate matching between the augmented model and reality information is not. To solve this problem, marker based AR technology is used to attach a specific image to the model. However, the markers get damaged due to the characteristic of the shipbuilding and offshore plant industry, and the camera needs to be able to detect the entire marker clearly, and thus requires sufficient space to exist between the operator. In order to overcome the limitations of the existing AR system, in this study, a markerless AR was adopted to accurately recognize the actual model of the pipe system that occupies the most processes in the shipbuilding and offshore plant industries. The matching methodology. Through this system, it is expected that the twist phenomenon of the augmented model according to the attitude of the real worker and the limited environment can be improved.