• Proceedings of the KOSOMBE Conference
• /
• v.1996 no.05
• /
• pp.305-310
• /
• 1996

The objective of this paper is to develop computer assisted learning system for the education of cardiac disease using multimedia. Total 20 cases of disease was selected and their asculation, X-Ray, ECG, Sanography, Angiogram and RI-Study results can be shown on the computer screen. The references about cardiology, surgical process can be also shown on the screen and the computer can test and score their records for the evaluation. This system will be widely applied for the education of medicine combined wi th the communication network.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.889-891
• /
• 1993

In order to perform the group control of motor drive systems in such as steel process line, high performance communication system is indispensible. In this paper, we introduce newly developed communication system which is suitable for these group control application. Using HDLC protocol, this system can transfer data to a long distance(up to 1km) at high speed(1Mbps) with reliability and efficiency. The performance of this communication system was proven through the application to the group control of DAEKYOUNG Bar Mill Line.

• Journal of Korea Foundry Society
• /
• v.28 no.6
• /
• pp.256-260
• /
• 2008

The Hybrid-Lower Arm, which has been developed for reducing cost and weight, was produced by three kinds of casting methods such as the high-pressure diecasting(HPDC), the squeeze casting(SC), and the H-NCM rheocasting process. The important factors for development of the Hybrid-Lower Arm are the integral feeding in Al casting for heat treatment and the high joinning ratio between the steel part and the Al part. In this study, effects of these casting processes on the quality of Hybrid-Lower Arm were investigated. Compared with HPDC and squeeze casting, the rheocasitng process using the H-NCM slurry had some advantages in joinning different materials of Al and steel pipe without deforming the steel pipe. X-ray analysis also showed the poreless microstructure in semisolid Hybrid-Lower Arm. In the torsion stress test, semisolid Hybrid-Lower Arm was satisfied with the requirements of automobile standard.

• Korean Journal of Animal Reproduction
• /
• v.27 no.4
• /
• pp.309-315
• /
• 2003

DNA methylation at CpG sites, which is a epigenetic modification, is associated with gene expression without change of DNA sequences. During early mouse embryogenesis, dynamic changes of DNA methylation occur. In this study, DNA methylation patterns of porcine embryos produced in vivo and in vitro were examined at various developmental stages by the immunocytochemical staining method. Interestingly, active demethylation was not observed on the paternal pronucleus of porcine zygotes. However, differences were detected in the passive demethylation process between in vivo and in vitro embryos. There was no change in the DNA methylation state until the blastocyst stage of in vivo embryos, whereas partial demethylation was observed in several blastomeres from a 4 cell stage to a morula stage of in vitro embryos. The whole genome of inner cell mass (ICM) and trophectoderm (TE) cells in porcine blastocysts were evenly methylated without de novo methylation. Our findings demonstrate that genome-wide demethylation does not occur in pig embryos during preimplantation development unlike murine and bovine embryos. It indicates that the machinery regulating epigenetic reprogramming may be different between species.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.7
• /
• pp.87-93
• /
• 2014

TIn analysis as the first step of S/W development, security requirements of identification and authentication, ID and password management, authentication process, authentication method, ete. should be defined. Identification is to uniquely identify certain users and applications running on a certain system. Authentication means the function to determine true or false users and applications in some cases. This paper is to suggest the security requirements for identification and authentication in analysis step. Firstly, individual ID should be uniquely identified. The second element is to apply the length limitations, combination and periodic changes of passwords. The third should require the more reinforced authentication methods besides ID and passwords and satisfy the defined security elements on authentication process. In this paper, the security requirements for the step of identification and authentication have been explained through several practical implementation methods.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.43 no.1
• /
• pp.143-150
• /
• 2020

To enhance the effectiveness of the FMS (flexible manufacturing system), it is necessary for the manufacturing control system to be upgraded by integrating the cyber and the physical manufacturing systems. Using the CPPS (Cyber-Physical Production System) concept, this study proposes a 4-stage vertical integration and control framework for an aircraft parts manufacturing plant. In the proposed framework, the process controller prepares the operations schedule for processing work orders generated from the APS (advanced planning & scheduling) system. The scheduled operations and the related control commands are assigned to equipments by the dispatcher of the line controller. The line monitor is responsible for monitoring the overall status of the FMS including work orders and equipments. Finally the process monitor uses the simulation model to check the performance of the production plan using real time plant status data. The W-FMCS (Wing rib-Flexible Manufacturing Control & Simulation) are developed to implement the proposed 4-stage CPPS based FMS control architecture. The effectiveness of the proposed control architecture is examined by the real plant's operational data such as utilization and throughput. The performance improvement examined shows the usefulness of the framework in managing the smart factory's operation by providing a practical approach to integrate cyber and physical production systems.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.6
• /
• pp.152-158
• /
• 2013

The purpose of this study is to investigate cooling performance of high power LEDs from 100 to 200 W class by using a jet impingement cooling module. The numerical analysis of forced convection cooling inside cooling module is carried out using a multi-purpose CFD software, FLUENT 6.3. In the experiments, the LED cooling system consists of jet impingement module, heat exchanger, water reservoir, and pump. In the present study, the cooling performance of jet impingement cooling module is investigated to determine the effect of the heat sink types on the impinging surface, the space and length of fins. Numerical and experimental studies show the reasonable agreement of LED metal PCB temperature between those results and give the optimized design parameters such as the space of fin and the length of fin. Also, the pin fin type of heat sink is found to be more efficient than the plate type heat sink in jet impingement cooling.

• The Journal of the Korea Contents Association
• /
• v.5 no.3
• /
• pp.103-111
• /
• 2005

By international lighting market's growth and domestic landscape lighting market's growth, the latest lighting market is activated. But, They are doing price competition that domestic lighting technology and development technology of lighting fixtures design do not possess international competitiveness than these change. Specially, as image of area and the country can be influenced greatly by cityscape at present visual point that many interests are converged country and identity establishment of local government, many cities are using force hereupon. Constructs which cityscape is various including natural ecology area of life environment gather and are done Image creation and this people's consciousness and culture living soon inside thing which do speaking by proxy be. Than city's night view nature lighting more than by spectacle lighting along with life lighting to basis materialize can. It is meaning more than thing that fine view of city becomes beautiful simply that night view of city becomes superior, that means that city efficiency and quality of life are exalted by a word. Wish to establish effective lighting technology and new product design process through PLS lighting technical development and 300 W lighting fixtures design development hereupon, and raise domestic spectacle lighting market's localization and domestic lighting market's competitive power furthermore.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.1 no.1
• /
• pp.38-47
• /
• 2002

Machining quality has been improved with the development of cutting tools. However, it is difficult to obtain a high degree of quality in machining a deep pocket with a long end mill, since machining accuracy is mainly dependent on the stiffness of the cutting tool and tool holder. To improve machining quality in machining a deep pocket using an end mill, the performance by cutting condition compare with others. Owing to this problem, it is necessary to select suitable tool and holder in the deep pocket machining. In this study, the hydraulic holder for the high speed machining is introduced and the performance of that is compared with others according to cutting conditions. The cutting parameters involved were; slenderness ratio in the range of 3 to 6 (L/D), radial depth of cut from 0.01 to 0.05 mm. Cutting force and surface roughness, precision of form were observed during the experiment to investigate cutting state.

• The Korean Nurse
• /
• v.32 no.1
• /
• pp.47-60
• /
• 1993

This study was performed to develop the conceptual framework of the nursing productivity. The study efforts were made (1) to define the concept the nursing productivity, (2) to identify the elements of the productivity, and (3) to determine the relationship among the elements. With the aim, the study employed a descriptive analysis by way of reviewing various references related w the subject. The nursing productivity consists of such elements as the nursing efficiency and Lhe nursing effectiveness which are complememary Lo each other. The nursing efficiency is the quantative input/output ratio, while the nursing effectiveness represents the integrated outcome of sch sub-elements as the degree of accomplishing nursing goals, the quality of nursing service, consumer's satisfaction, and the degree of improvement of nurse's attitude toward the quality care. The nursing prodiccivity can be estimated by summing up the nursing efficiency and the effectiveness. By employing the system theory model, the elements of the nursing producTivity consist of three elements; the input, the process, and the output. By the process elements, the system inputs are transformed to the system outputs nursing efficiency and nursing effecitveness which are input 1.0 the system, in turn, through feedback mechanism(Figure 4).